Zobrazeno 1 - 10
of 18
pro vyhledávání: '"Udayagiri, Chandrasekhar"'
Autor:
Suresh Kumar, Sanjeev Kumar, Pardeep Kumar Nagpal, Sharad Ramdas Gawade, Sachin Salunkhe, Udayagiri Chandrasekhar, João Paulo Davim
Publikováno v:
Metals, Vol 13, Iss 4, p 685 (2023)
Lightweight aluminum composite is a class of foam material that finds many applications. These properties make it suitable for many industries, such as the transportation, aerospace and sports industries. In the present work, closed-cell foams of an
Externí odkaz:
https://doaj.org/article/cf49e506a41d4149a164e5c29d2f7d13
Publikováno v:
Aircraft Engineering and Aerospace Technology, 2018, Vol. 91, Issue 1, pp. 94-111.
Externí odkaz:
http://www.emeraldinsight.com/doi/10.1108/AEAT-10-2017-0217
Publikováno v:
In Materials Today: Proceedings 2017 4(2) Part A:2439-2444
Publikováno v:
Thermal Science, Vol 22, Iss 1 Part B, Pp 477-485 (2018)
The objective of the study is to observe the Nusselt number and friction factor behavior in a tube heat exchanger fitted with staggered and non-staggered conical strip inserts using water based titanium oxide nanofluid under laminar flow conditions.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::be7a086e50475556d4330b7afa3f2e03
https://doi.org/10.2298/tsci151024250a
https://doi.org/10.2298/tsci151024250a
Publikováno v:
Journal of The Institution of Engineers (India): Series C. 98:595-606
The design of plain orifice simplex atomizer for use in the annular combustion system of 1100 kW turbo shaft engine is optimized. The discrete flow field of jet fuel inside the swirl chamber of the atomizer and up to 1.0 mm downstream of the atomizer
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0d5e5174012d132dbac34f7c091e4069
https://doi.org/10.1007/s40032-016-0300-7
https://doi.org/10.1007/s40032-016-0300-7
Publikováno v:
Applied Mechanics and Materials. :791-795
Contemporary product design and development efforts of various engineering organizations have experienced the emergence of Additive Manufacturing (AM) or 3D printing technology as a competent fabrication option for converting digital data into physic
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::776dcd8d54b52cee57750c848c04b659
https://doi.org/10.4028/www.scientific.net/amm.813-814.791
https://doi.org/10.4028/www.scientific.net/amm.813-814.791
Autor:
Udayagiri Chandrasekhar, Lung-Jieh Yang, Chieh-Ming Cheng, Balasubramanian Esakki, Kuan-Cheng Hung
Publikováno v:
International Journal of Micro Air Vehicles. 7:181-202
In the body of research relevant to high-performance flapping micro air vehicles (MAV), development of light-weight, compact and energy-efficient flapping mechanisms occupies a position of primacy due to its direct impact on the flight performance an
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::70f87a4f252d718aa3bc609a0b831a29
https://doi.org/10.1260/1756-8293.7.2.181
https://doi.org/10.1260/1756-8293.7.2.181
Publikováno v:
International Journal of Materials Engineering Innovation. 10:20
Predicting the life of piercing punch is one of the major concerns in the design of compound dies. Finite element analysis is performed to determine the maximum and minimum principal stresses through which fatigue limit of punch is estimated. The fac
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::0ca130d88dd9aba18dfbd97a526d80a5
https://doi.org/10.1504/ijmatei.2019.097892
https://doi.org/10.1504/ijmatei.2019.097892
Publikováno v:
International Journal of Materials and Product Technology. 59:229
Additive manufacturing (AM) technologies are gaining acceptance for fabricating end-use parts in several sectors and this study focuses on developing AM-based approach for gainful development of unmanned aerial vehicles (UAVs). Design-freedom and tim
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::d2fcec62642bd3a97938a82509afe318
https://doi.org/10.1504/ijmpt.2019.102933
https://doi.org/10.1504/ijmpt.2019.102933
Autor:
Lung-Jieh Yang, S. Siva Sakthi Velan, E. Balasubramanian, Sachin Salunkhe, Udayagiri Chandrasekhar
Publikováno v:
International Journal of Materials and Product Technology. 59:212
This paper presents a methodology for designing of flapping mechanisms and rapid fabrication using 3D printing (3DP) technique for subsequent application in micro aerial vehicles. A key feature of the present study is constraining of the mechanism we
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::55f66173f1b5a82799525e6fca76e971
https://doi.org/10.1504/ijmpt.2019.102932
https://doi.org/10.1504/ijmpt.2019.102932