Zobrazeno 1 - 10
of 24
pro vyhledávání: '"Tzung-Ming Chen"'
Autor:
Hsin-Min Lee, Tzung-Ming Chen
Publikováno v:
Advances in Materials Science and Engineering, Vol 2017 (2017)
Focusing on the feature of porosity in bamboo charcoal, this study applies the ultrasonic-assisted vibration method to perform surface polishing of the silicon wafer workpiece. The self-developed bamboo charcoal polishing spindle and ultrasonic- assi
Externí odkaz:
https://doaj.org/article/8f29e9d107124f3cbaacb3c70d846ec2
Autor:
Tzung-Ming Chen, 陳宗明
91
A power amplifier with high common-mode rejection capability and a RF transmitter for Bluetooth applications are presented in this thesis. These two proposed chips are fabricated in a standard 0.25μm single-poly-five-metal CMOS process. In t
A power amplifier with high common-mode rejection capability and a RF transmitter for Bluetooth applications are presented in this thesis. These two proposed chips are fabricated in a standard 0.25μm single-poly-five-metal CMOS process. In t
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/90269766227849606533
Autor:
Tzung-ming Chen, 陳宗明
88
The purpose of this study is to evaluate the wear resistance and mechanical behaviors of sintered carbides. In this work, TiC and WC based powder was aided 20% or 30% binders which consist of Mo、Ni and Co in different percentage. After liqu
The purpose of this study is to evaluate the wear resistance and mechanical behaviors of sintered carbides. In this work, TiC and WC based powder was aided 20% or 30% binders which consist of Mo、Ni and Co in different percentage. After liqu
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/41837010646640572909
Publikováno v:
Sensors & Materials; 2023, Vol. 35 Issue 11, Part 1, p3697-3711, 15p
Publikováno v:
Materials Testing. 64:809-819
The purpose of this study was to investigate the performance of different lubricated and protective conditions of wire ropes. The failure behaviors of wire ropes under different surface conditions were evaluated by using salt spray, wear, and tensile
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 119:3395-3405
Autor:
Tzung Ming Chen, Hsin Min Lee
Publikováno v:
Advances in Materials Science and Engineering, Vol 2017 (2017)
Focusing on the feature of porosity in bamboo charcoal, this study applies the ultrasonic-assisted vibration method to perform surface polishing of the silicon wafer workpiece. The self-developed bamboo charcoal polishing spindle and ultrasonic- assi
Publikováno v:
Journal of Microelectromechanical Systems. 19:706-714
An analysis method used to choose a suitable structural orientation layout for a microcompliant mechanism, which includes multi-curved-beams, is introduced, particularly, for fabricating microelectromechanical-systems (MEMS) thin-curved-beam microstr
Autor:
Ka-Un Chan, Chao-Hua Lu, S.-C. Yen, Che-Sheng Hu, Ying-Hsi Lin, Chao-Cheng Lee, Jiun-Zen Huang, Ming-Chong Huang, Wen-Shan Wang, Yung-Ming Chiu, Tzung-Ming Chen, Chun-Cheng Wang, Ying-Yao Lin, Bin-I Chang
Publikováno v:
IEEE Journal of Solid-State Circuits. 42:983-991
A low-power fullband 802.11a/b/g WLAN transceiver in 0.15-mum CMOS technology is described. The zero-IF transceiver achieves a receiver noise figure of 4.4/4 dB for the 2.4-GHz/5-GHz bands, respectively. The corresponding sensitivity at 54-Mb/s opera
Autor:
Hsin Min Lee, Tzung Ming Chen
Publikováno v:
Sensors and Materials. :1