Zobrazeno 1 - 10 of 12 pro vyhledávání: '"Toty Buzauova"'
1
Akademický článek
Determination of Optimal Hardfacing Modes for Recovering Electric Motor Shafts
Autor: Olga Zharkevich, Oxana Nurzhanova, Darkhan Zhunuspekov, Yelena Naboko, Toty Buzauova, Gulnur Abdugaliyeva, Arman Mateshov, Alexander Bessonov
Publikováno v: Tehnički Vjesnik, Vol 30, Iss 3, Pp 951-957 (2023)
The research aims to determine the optimal modes of hardfacing when restoring the shafts of electric motors, taking into account the resulting hardness of the deposited layer for further machining. When conducting a full-scale experiment on hardfacin
Externí odkaz: https://doaj.org/article/6828066ba84d45dfaf0dae3b684960b7
Zobrazit plný text záznamu
2
Research of the operation of the turnstile support-fastening device during the transportation of a long-dimensional heavy load
Autor: Janat Musayev, Vladimir Solonenko, Algazy Zhauyt, Seitbek Zhunisbekov, Gulbarshyn Smailova, Toty Buzauova
Publikováno v: Vibroengineering PROCEDIA. 49:80-85
The article analyzes the motion of a wheelset along a path of unequal length with shaft wear of the rails. The authors have studied the influence of an external disturbing force on the parametric system “wheel-rail”. The considered problem is sol
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::15897e6c548c9c527bf29e3e4075db54
https://doi.org/10.21595/vp.2023.23185
Zobrazit plný text záznamu
3
RESEARCH OF THE UNACCEPTABLE DEFECTS CAUSES IN THE MANUFACTURE OF REINFORCING ROPE
Autor: Toty Buzauova, Leonid Sivachenko, Saulekul Aizhambaeva, Shamshygajyn Toleubaeva, Kaizait Zhuldyzai, Gulnur Abdugaliyeva
Publikováno v: Journal of Applied Engineering Science. :1-5
In the production of reinforcing ropes, the patenting of wire rods is carried out under the technical production regulations. Patenting is a consequence of isothermal treatment, in which the decomposition of supercooled austenite is carried out in th
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::1cd9d5dfb9552709be141e4bc37dea8a
https://doi.org/10.5937/jaes0-36346
Zobrazit plný text záznamu
4
Planning and experimental studies of selection the optimal welding mode by the friction of fitting rods
Autor: Toty Buzauova, Bayanbek Turehanov, Arman Mateshov, Algazy Zhauyt, Sarakul Ismagulova, Seitbek Zhunisbekov
Publikováno v: Journal of Applied Engineering Science. 20:727-735
The methods of friction welding of various materials have been studied, as well as the design and capabilities of the device for friction welding have been determined. The design of the device for friction welding on the basis of a lathe has been dev
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_________::b13aa9fe149a32315e0f42583f755d2c
https://doi.org/10.5937/jaes0-35874
Zobrazit plný text záznamu
6
Chip formation during thermal friction turn milling
Autor: Karibek Sherov, Riza Gabdyssalik, Saule Ainabekova, Medgat Mussayev, Aybek Sherov, Aizhan Taskarina, Toty Buzauova
Publikováno v: Istrazivanja i projektovanja za privredu, Vol 19, Iss 1, Pp 142-147 (2021)
This paper presents the results of chip formation studies in the processing of 30KhGSA steel by thermofriction turn-milling. When studying the process in this work there are presented the results of studying chip formation when the processing of chip
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=doi_dedup___::a4ca61c2aaa4c69b99998412478e2bb4
https://doi.org/10.5937/jaes0-27510
Zobrazit plný text záznamu

Vyhledávací nástroje:

Upřesnit hledání

Omezení vyhledávání
Plný text Recenzováno Digitální knihovna AV ČR
Zdroje