Zobrazeno 1 - 10
of 51
pro vyhledávání: '"Tomasz Brynk"'
Autor:
Katarzyna Sharman, Piotr Bazarnik, Tomasz Brynk, Asli Gunay Bulutsuz, Malgorzata Lewandowska, Yi Huang, Terence G. Langdon
Publikováno v:
Journal of Materials Research and Technology, Vol 4, Iss 1, Pp 79-83 (2015)
Titanium alloys, mainly Ti–6Al–4V, are commonly used in biomedical applications as orthopedic implants. Due to the potential toxic influence of V and Al cations on health, a new alloy composition, Ti–24Nb–4Zr–8Sn, was introduced. However, T
Externí odkaz:
https://doaj.org/article/7137f5d1dca94c3cb83a62ccb4db5efc
Autor:
Bartłomiej Wysocki, Joanna Idaszek, Karol Szlązak, Karolina Strzelczyk, Tomasz Brynk, Krzysztof J. Kurzydłowski, Wojciech Święszkowski
Publikováno v:
Materials, Vol 9, Iss 3, p 197 (2016)
Nowadays, post-surgical or post-accidental bone loss can be substituted by custom-made scaffolds fabricated by additive manufacturing (AM) methods from metallic powders. However, the partially melted powder particles must be removed in a post-process
Externí odkaz:
https://doaj.org/article/a5557fcde9fc47b7b992aa70693ab37c
Publikováno v:
Metallurgical and Materials Transactions A. 52:20-25
The present study describes a novel approach applying 3D digital image correlation to a hole drilling method to measure residual stresses. Measurements were performed on a friction stir-welded joint made of ultrafine-grained aluminum. The results sho
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b0ca6b8ade392bb3e472867ea594ee3a
https://doi.org/10.1007/s11661-020-06069-5
https://doi.org/10.1007/s11661-020-06069-5
Publikováno v:
Scripta Materialia. 174:14-18
This work presents the first observation of ultrasound and eddy currents coupling with Portevin–Le Chatelier serrations during tensile straining of aluminium-magnesium alloy small-size samples, of a gauge section 5.0 × 0.8 × 0.6 mm3. Significant
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::120062347a30a4168979f2410b088a63
https://doi.org/10.1016/j.scriptamat.2019.08.024
https://doi.org/10.1016/j.scriptamat.2019.08.024
Publikováno v:
EPJ Nuclear Sciences & Technologies
Research to better understand the phenomena influencing materials and components’ performance is important for increasing the safety of Generation II and III nuclear plants. A crucial step for improving nuclear safety is the development of new expe
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::9c8dc466e00f7743bf44bfb91801a118
Autor:
Tomasz Brynk, Eberhard Altstadt, Pentti Arffman, Inge Uytdenhouwen, Marlies Lambrecht, Tom Petit
Publikováno v:
Brynk, T, Lambrecht, M, Uytdenhouwen, I, Arffman, P, Altstadt, E & Petit, T 2021, Fractesus project : General framework of materials selection and testing processes . in Proceedings of the ASME 2021 Pressure Vessels & Piping Conference : Materials and Fabrication . vol. 4, V004T06A066, American Society of Mechanical Engineers (ASME), ASME 2021 Pressure Vessels and Piping Conference, PVP 2021, Virtual, Online, 13/07/21 . https://doi.org/10.1115/PVP2021-61906
Volume 4: Materials and Fabrication
Volume 4: Materials and Fabrication
The H2020 project entitled “Fracture mechanics testing of irradiated RPV steels by means of sub-sized specimens (FRACTESUS)” started on the 1st October 2020. The aim of this project is to demonstrate the applicability of miniaturized compact tens
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::6307b2a357f912c8c1b375e93d888641
Publikováno v:
Volume 1: Codes and Standards.
Following the detection of a large number of quasi-laminar flaw indications in the core shells of two Belgian Reactor Pressure Vessels (RPV), an extensive Safety Case demonstrating the Fitness-for-Service for continued operation of both reactors was
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::10d7bf6b22f89cf63e0a56d853ee7b2a
https://doi.org/10.1115/pvp2021-60379
https://doi.org/10.1115/pvp2021-60379
Publikováno v:
Engineering Failure Analysis. 104:471-479
The low carbon P110 steel has been recently considered as a potential pipeline material for shale gas sequestration using CO2-based fracturing technique. The significant problem in such natural gas production and transportation system is a CO2 corros
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::dee626a88622517b3ada2d5b113e999a
https://doi.org/10.1016/j.engfailanal.2019.06.016
https://doi.org/10.1016/j.engfailanal.2019.06.016
Autor:
Milena Koralnik, Bogusława Adamczyk-Cieślak, Roman Kuziak, Tomasz Brynk, Jaroslaw Mizera, Tomasz Zygmunt
Publikováno v:
Materials Science and Engineering: A. 747:144-153
Microstructural analysis of new bainitic steel subject to heat treatment was performed and directly compared with those achieved from the microstructure of R-260 pearlitic rail steel. Mechanical properties, fracture behaviour, and low-cycle fatigue (
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8800506d6364cca4cb4b5f1bee2b4fdc
https://doi.org/10.1016/j.msea.2019.01.043
https://doi.org/10.1016/j.msea.2019.01.043
Publikováno v:
Materials Letters. 233:270-273
The present study proposes a novel approach to rolling in order to achieve further microstructure modification and mechanical properties improvement of already severely deformed materials. Commercially pure aluminium was subjected to the combined, tw
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::085c518a504f50ebf760b290b0c8624f
https://doi.org/10.1016/j.matlet.2018.09.047
https://doi.org/10.1016/j.matlet.2018.09.047