Zobrazeno 1 - 7
of 7
pro vyhledávání: '"Tomáš Primus"'
Publikováno v:
Acta Polytechnica, Vol 63, Iss 1, Pp 36-49 (2023)
Ultra-short pulsed laser ablation may be used for high-precision machining with very low thermal influence on the processed materials. Due to this reason, lasers are increasingly used for processing of advanced materials, such as titanium alloys, nic
Externí odkaz:
https://doaj.org/article/35e8b6fa78fa41d590f59f4d97b2efd9
Publikováno v:
Materials, Vol 14, Iss 9, p 2228 (2021)
In this paper, a quick nanosecond laser micro structuring process was employed to change the surface wettability of Ti6Al4V alloy. The same laser structuring method was used throughout, but with varying input fluence. The laser processing parameters
Externí odkaz:
https://doaj.org/article/290f29a95fe84901b2804a2cfd01485f
Autor:
Tomáš Primus, Josef Hlavinka, Pavel Zeman, Jan Brajer, Martin Šorm, Adam Čermák, Pavel Kožmín, František Holešovský
Publikováno v:
Materials, Vol 14, Iss 4, p 951 (2021)
The lifetime and properties of cutting tools and forming moulds can be prolonged and enhanced by the deposition of hard, thin coatings. After a certain period of usage, the coating will deteriorate. Any remaining coating must be removed prior to succ
Externí odkaz:
https://doaj.org/article/de3e13f4b7fe4b568e639406ee0390b9
Publikováno v:
Lasers in Manufacturing and Materials Processing. 10:205-224
Coatings are used in many industrial applications as a protective barrier, improving component properties such as friction, wear resistance, and thermal resistivity. When components become worn, any coatings must be thoroughly removed before performi
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 121:3215-3228
Publikováno v:
Materials
Volume 14
Issue 9
Materials, Vol 14, Iss 2228, p 2228 (2021)
Volume 14
Issue 9
Materials, Vol 14, Iss 2228, p 2228 (2021)
In this paper, a quick nanosecond laser micro structuring process was employed to change the surface wettability of Ti6Al4V alloy. The same laser structuring method was used throughout, but with varying input fluence. The laser processing parameters
Autor:
Pavel Zeman, Adam Čermák, Josef Hlavinka, Tomáš Primus, Pavel Kožmín, František Holešovský, Martin Šorm, Jan Brajer
Publikováno v:
Materials
Volume 14
Issue 4
Materials, Vol 14, Iss 951, p 951 (2021)
Volume 14
Issue 4
Materials, Vol 14, Iss 951, p 951 (2021)
The lifetime and properties of cutting tools and forming moulds can be prolonged and enhanced by the deposition of hard, thin coatings. After a certain period of usage, the coating will deteriorate. Any remaining coating must be removed prior to succ