Zobrazeno 1 - 10
of 10
pro vyhledávání: '"Tolga Ural"'
Publikováno v:
Journal of Energy Storage. 64:107220
Publikováno v:
Energy. 274:127400
Publikováno v:
Volume: 6, Issue: 2 157-168
International Journal of Pure and Applied Sciences
International Journal of Pure and Applied Sciences
The necessity of using the glass vent or the 150 cm2 cross-section vent systems as a fixed duct ventilation system according to the TS 7363 standard in flats where natural gas is used has been investigated. It is observed that type A type chimneyless
Publikováno v:
Environmental Progress & Sustainable Energy. 39
Publikováno v:
Sustainable Energy Technologies and Assessments. 47:101534
Solar air collectors are integrated into the air source heat pump in order to increase the performance of the heat pump in cold climate regions. The evaporator air is heated by solar air collectors. In this study, two different types of solar air col
Publikováno v:
Applied Thermal Engineering. 121:242-254
This study aims to optimize the thickness of the insulation layer in the pipes made of different materials for HVAC pipe applications. The pipes used are made of steel, plastic and copper. In case of using some fuel types and various insulation mater
Publikováno v:
Applied Thermal Engineering. 191:116905
In this study, a newly system is designed and tested which integrates air-to-water heat pump and solar air collector having fabric absorber for the shortcoming of frost depositing on the evaporator in heating condition. Thus, it can achieve synchrono
Autor:
Tolga Ural
Publikováno v:
Energy. 188:116116
This article is about experimental energy, exergy and economic analyses of a new solar air collector (SAC). It is then compared with the thermodynamic performance of the flat-plate solar air collector (FP-SAC). For this purpose, a new SAC is produced
Publikováno v:
Environmental Progress & Sustainable Energy. 38:13155
Autor:
Tolga Ural, Hamit Akbulut
Publikováno v:
Journal of Thermoplastic Composite Materials. 20:371-387
Notches, holes etc. can often be found in structural components for ventilation and sometimes to lighten the structure. In aircraft components, such as wing, spar, fuselage, and ribs, these cutouts are necessary for access, inspection, electric lines