Zobrazeno 1 - 10
of 76
pro vyhledávání: '"Thanh, Trung Do"'
Autor:
Nguyen Truong Giang, Pham Son Minh, Tran Anh Son, Van-Thuc Nguyen, Tran Minh The Uyen, Thanh Trung Do, Van Thanh Tien Nguyen
Publikováno v:
PLoS ONE, Vol 19, Iss 8, p e0307485 (2024)
In this study, we present a novel approach to injection molding, focusing on the strength of weld lines in polyamide 6 (PA6) composite samples. By implementing a mold temperature significantly higher than the typical molding practice, which rarely ex
Externí odkaz:
https://doaj.org/article/9b643774c9c94036804c99e146d99008
Autor:
Pham Son Minh, Van-Thuc Nguyen, Thanh Trung Do, Tran Minh The Uyen, Huynh Do Song Toan, Huynh Thi Tuyet Linh, Van Thanh Tien Nguyen
Publikováno v:
Metals, Vol 14, Iss 1, p 5 (2023)
The influence of welding angle, welding current, travel speed, pulse time, and torch height on the geometry, macrostructure, and mechanical properties of Tungsten Inert Gas (TIG) orbital welding on an SUS 304 stainless steel pipe is investigated in t
Externí odkaz:
https://doaj.org/article/5a047b9d4e2849d8a48cb873c45d2e28
Autor:
Tran Minh The Uyen, Pham Son Minh, Van-Thuc Nguyen, Thanh Trung Do, Hai Nguyen Le Dang, Van Thanh Tien Nguyen
Publikováno v:
Applied Sciences, Vol 13, Iss 23, p 12825 (2023)
This research focuses on the fabrication of plastic flexure hinges from diverse plastics such as ABS, PP, HDPE, and LDPE. To enhance hinge efficiency, the recycling ratios are also investigated. The amplification ratio of different recycle ratios and
Externí odkaz:
https://doaj.org/article/0af1013d7ea446d1b9ce92b2e39a9025
Autor:
Thi Hien, Hoang, Thi Anh Thu, Do, Quang Ngan, Pham, Hong Thai, Giang, Thanh Trung, Do, Trung, Tran, Minh Tan, Man, Truong Giang, Ho *
Publikováno v:
In Sensors and Actuators: B. Chemical 1 August 2021 340
Publikováno v:
Machines, Vol 11, Iss 6, p 644 (2023)
In mechanical cutting and machining, self-excited vibration known as “Chatter” often occurs, adversely affecting a product’s quality and tool life. This article proposes a method to identify chatter by applying a machine learning model to class
Externí odkaz:
https://doaj.org/article/1dd1ca9eb2e648b182f610df7ceade55
Publikováno v:
Micromachines, Vol 14, Iss 5, p 1025 (2023)
Nowadays, machining products, especially by turning methods, are more and more popular and require high-quality. With the development of science and technology, especially numerical computing technology and control technology, the application of thes
Externí odkaz:
https://doaj.org/article/3e50bae11e244369b06e2aa9e23ca58d
Autor:
Van-Thuc Nguyen, Pham Son Minh, Tran Minh The Uyen, Thanh Trung Do, Han Vuong Thi Ngoc, Minh-Tai Le, Van Thanh Tien Nguyen
Publikováno v:
Metals, Vol 13, Iss 5, p 873 (2023)
This study surveys the influences of travel speed, voltage, and intensity on the characteristics of low-carbon steel samples generated by the Wire Arc Additive Manufacturing (WAAM) technique. The results indicated that the WAAM samples have isotropy
Externí odkaz:
https://doaj.org/article/9ffa8f9c0dd249bc83b1d1bc225dee35
Autor:
Tran Minh The Uyen, Pham Son Minh, Van-Thuc Nguyen, Thanh Trung Do, Vinh Tien Nguyen, Minh-Tai Le, Van Thanh Tien Nguyen
Publikováno v:
Micromachines, Vol 14, Iss 4, p 827 (2023)
The wire Arc Additive Manufacturing (WAAM) technique has evolved into a cutting-edge 3D printing technique. This study surveys the influences of trajectory on the characteristics of low-carbon steel samples generated by the WAAM technique. The result
Externí odkaz:
https://doaj.org/article/39143b8df02b469aba98f512c2a84e00
Autor:
Pham Son Minh, Van-Thuc Nguyen, Vinh Tien Nguyen, Tran Minh The Uyen, Thanh Trung Do, Van Thanh Tien Nguyen
Publikováno v:
Micromachines, Vol 13, Iss 11, p 1890 (2022)
The fatigue performance of polypropylene (PP) at various amplitudes and frequencies on fatigue cycles under tensile test conditions is investigated in this study. The results show that increasing the frequency leads to a decrease in fatigue cycles du
Externí odkaz:
https://doaj.org/article/b7907cc3145c41fab972ab63145f9761
Publikováno v:
Journal of Technical Education Science. :75-82
In this paper, the air-assisted mold temperature control (AMTC) is applied for heating the mold in the injection molding process. The simulation is run with the same boundary conditions in the experiment. The results shows that the AMTC can heat the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::03bde49e47c822414d7f34358bf8de78
https://doi.org/10.54644/jte.74.2023.1338
https://doi.org/10.54644/jte.74.2023.1338