Zobrazeno 1 - 10
of 10
pro vyhledávání: '"Thanachai Boonchuduang"'
Autor:
Abdul Azeez Abdu Aliyu, Chedtha Puncreobutr, Surasak Kuimalee, Thanawat Phetrattanarangsi, Thanachai Boonchuduang, Pariwat Taweekitikul, Chinnapat Panwisawas, Junji Shinjo, Boonrat Lohwongwatana
Publikováno v:
Journal of Materials Research and Technology, Vol 30, Iss , Pp 5121-5132 (2024)
Porosity defects are inherently present in Ti–6Al–4V (Ti6-4) parts produced using additive manufacturing (AM) methods like laser powder-bed fusion (LPBF). This work aims to investigate different laser-inherent porosity defects at various LPBF par
Externí odkaz:
https://doaj.org/article/34f52b63fbb14c2c9b165d357ee798ab
Autor:
Tanachat Eknapakul, Arreerat Jiamprasertboon, Penphitcha Amonpattaratkit, Adulphan Pimsawat, Sujittra Daengsakul, Nantawat Tanapongpisit, Wittawat Saenrang, Atipong Bootchanont, Pattarapong Wannapraphai, Thanawat Phetrattanarangsi, Thanachai Boonchuduang, Atchara Khamkongkaeo, Rattikorn Yimnirun
Publikováno v:
Heliyon, Vol 10, Iss 8, Pp e29665- (2024)
In this study, the interplay between the structural complexity, microstructure, and mechanical properties of calcium phosphates (CaPs) derived from fish bones, prepared at various calcination temperatures, and their corresponding sintered ceramics wa
Externí odkaz:
https://doaj.org/article/446c4aa7163042dfb90f6dce7418e317
Autor:
Pitphichaya Suksangrat, Wantana Klysubun, Thanachai Boonchuduang, Sujittra Daengsakul, H-thaichnok Chunate, Nutth Tuchinda, Penphitcha Amonpattaratkit, Adulphan Pimsawat, Wutthigrai Sailuam, Drusawin Vongpramate, Boonrat Lohwongwatana, Atchara Khamkongkaeo, Atipong Bootchanont
Publikováno v:
Ceramics International. 47:34575-34584
In this work, Nile tilapia (Oreochromis niloticus) bone was calcined at 800 °C for 5 h in an air atmosphere to obtain hydroxyapatite powder (FB powder). The elemental composition, phase structure, and morphology of the FB powder were investigated an
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::559801c6d61ebece6185d2d132486aa4
https://doi.org/10.1016/j.ceramint.2021.08.372
https://doi.org/10.1016/j.ceramint.2021.08.372
Autor:
Atchara Khamkongkaeo, Pinit Kidkhunthod, Thanachai Boonchuduang, Puripat Kantha, Rattikorn Yimnirun, Nuttapon Pisitpipathsin, T. Saisopa, Narong Chanlek, Atipong Bootchanont, Kamonpan Pengpat
Publikováno v:
Ceramics International. 46:5665-5670
Lead-free bismuth sodium lanthanum titanate and barium titanate (Bi0.4871Na0.4871La0.0172TiO3–BaTiO3; ((1-x)BNLT-xBT) ceramic system, where x = 0.00, 0.02, 0.04, 0.06, 0.08, and 0.10, were synthesized by a modified two-step mixed oxide method. The
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5689315a27fda0ab049fa564b615b170
https://doi.org/10.1016/j.ceramint.2019.11.013
https://doi.org/10.1016/j.ceramint.2019.11.013
Autor:
Atchara Khamkongkaeo, Thanachai Boonchuduang, Boonrat Lohwongwatana, Wantana Klysubun, Rattikorn Yimnirun, Atipong Bootchanont, Penphitcha Amonpattaratkit, Chedtha Puncreobutr
Publikováno v:
Metallurgical and Materials Transactions A. 51:586-596
In titanium casting, a reaction byproduct known as alpha-case is a hard and brittle phase layer that exists on the surface of cast objects. This reaction layer may be detrimental to the mechanical properties of cast objects and may complicate the fin
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f664af057dda34a0be45787f7f907f64
https://doi.org/10.1007/s11661-019-05541-1
https://doi.org/10.1007/s11661-019-05541-1
Autor:
Penphitcha Amonpattaratkit, Surasak Kuimalee, Wantana Klysubun, Boonrat Lohwongwatana, Noppadon Nuntawong, Atipong Bootchanont, Thanachai Boonchuduang, Nutth Tuchinda, Atchara Khamkongkaeo, Thanawat Phetrattanarangsi
Publikováno v:
Ceramics International. 45:1356-1362
This paper reports on the addition of Al(H 2 PO 4 ) 3 binder solution with different vol% ratio and its effects on the mechanical behavior of the formed silicon dioxide ceramic. The starting material, commercial phosphate-bonded investment material,
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c7068a038c796eab1e74c60410db5e9a
https://doi.org/10.1016/j.ceramint.2018.07.253
https://doi.org/10.1016/j.ceramint.2018.07.253
Autor:
Atchara Khamkongkaeo, Kridsanapan Srimongkon, Sujittra Daengsakul, Pinit Kidkhunthod, Burimpak Sakkomolsri, Wantana Klysubun, Adulphan Pimsawat, Panus Sriwattana, Boonrat Lohwongwatana, Atipong Bootchanont, Thanachai Boonchuduang, Thanawat Phetrattanarangsi, Wutthigrai Sailuam
Publikováno v:
Journal of Magnetism and Magnetic Materials. 460:327-333
This paper reports on the ferromagnetism of MgO powder and degraded powder at room temperature. The starting material, Mg(OH)2, was analyzed by X-ray fluorescence (XRF) spectrometry and then calcined at 450 °C for 5 h to obtain fresh MgO powder. The
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::971c6ac64a1be61c91001062a64d584e
https://doi.org/10.1016/j.jmmm.2018.01.074
https://doi.org/10.1016/j.jmmm.2018.01.074
Autor:
Methawee Choosri, Boonrat Lohwongwatana, Jirapon Khamwannah, H-thaichnok Chunate, Thanawat Phetrattanarangsi, Thanachai Boonchuduang, Chedtha Puncreobutr, Dechawut Decha-umphai
Publikováno v:
Surface and Coatings Technology. 421:127431
Typical 3D-printing processes involve rapid cooling steps that significantly affect the mechanical behavior of printed Ti-6Al-4V alloys. In this study, the 3D-printing technique was used to fabricate Ti-6Al-4V parts, as is customary of bone implants;
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::bdcfc3ebe9c7b464b6c3c31274983184
https://doi.org/10.1016/j.surfcoat.2021.127431
https://doi.org/10.1016/j.surfcoat.2021.127431
Autor:
Boonrat Lohwongwatana, Napat Mothaneeyachart, Atchara Khamkongkaeo, Thanachai Boonchuduang, Santi Phumying, Thanawat Phetrattanarangsi, Sujittra Daengsakul, Narong Chanlek, Adulphan Pimsawat, Panus Sriwattana, Burimpak Sakkomolsri, Chonnakan Thongchai, Pinit Kidkhunthod
Publikováno v:
Journal of Alloys and Compounds. 705:668-674
MgO powders were synthesized by a thermal decomposition method which was determined by differential scanning calorimetry coupled with thermogravimetric analysis (TG/DSC). The starting material, Mg(OH) 2, was calcined at 400 °C, 450 °C and 500 °C f
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::02d451ef17d80067b633ecd57ada23f5
https://doi.org/10.1016/j.jallcom.2017.02.170
https://doi.org/10.1016/j.jallcom.2017.02.170
Autor:
Boonchuduang, Thanachai, Bootchanont, Atipong, Klysubun, Wantana, Amonpattaratkit, Penphitcha, Khamkongkaeo, Atchara, Puncreobutr, Chedtha, Yimnirun, Rattikorn, Lohwongwatana, Boonrat
Publikováno v:
Metallurgical & Materials Transactions. Part A; Feb2020, Vol. 51 Issue 2, p586-596, 11p, 2 Diagrams, 3 Charts, 6 Graphs