Zobrazeno 1 - 10
of 93
pro vyhledávání: '"Temel VAROL"'
Autor:
A. Bharatish, G. N. Vijayakumara, B. Venkataraman, G. Satheesh Babu, D. V. N. Harish, Sivakumar Solaiachari, Temel Varol
Publikováno v:
Cogent Engineering, Vol 11, Iss 1 (2024)
This study investigates the influence of laser pulse energy and scanning speed on the residual stresses induced during the laser surface treatment of tantalum-coated SS461 steel substrates. Residual stress simulations were performed using the COMSOL
Externí odkaz:
https://doaj.org/article/71e35f5403d44fdc8d7a29b8cfbc3c88
Publikováno v:
Düzce Üniversitesi Bilim ve Teknoloji Dergisi, Vol 11, Iss 1, Pp 111-124 (2023)
Al esaslı alaşımlar havacılık, otomotiv ve savunma sanayi gibi birçok sektörde kullanılmaktadır. Düşük yoğunlukları ve yüksek özgül mukavemet özellikleri, Al ve alaşımlarını mühendislik malzemeleri olarak kullanılabilir hale g
Externí odkaz:
https://doaj.org/article/55cc2aeb561e4745af9bd1f14d09f02d
Publikováno v:
International Journal of Lightweight Materials and Manufacture, Vol 4, Iss 1, Pp 127-144 (2021)
Electrical discharge machining (EDM) is a non-conventional machining process which was developed to machine hard to cut materials for the past few decades. In addition to this, it also used to modify the surface characteristics of the material throug
Externí odkaz:
https://doaj.org/article/3e6a79db98f14903978d854cd536113f
Investigation of WEDM process parameters of Al–SiC–B4C composites using response surface methodology
Autor:
S. Suresh Kumar, F. Erdemir, Temel Varol, S. Thirumalai Kumaran, M. Uthayakumar, Aykut Canakci
Publikováno v:
International Journal of Lightweight Materials and Manufacture, Vol 3, Iss 2, Pp 127-135 (2020)
Aluminum based composites are widely used in various engineering applications. Though the processing of these materials is easy, it requires advanced machining techniques to cut the same as it becomes harder after the addition of ceramic reinforcemen
Externí odkaz:
https://doaj.org/article/a47bcdf2ddfa4b3aa88dbcaf9bc3917e
Autor:
S. Vignesh, J. T. Winowlin Jappes, S. Nagaveena, R. Krishna Sharma, M. Adam Khan, Chaitali V. More, N. Rajini, Temel Varol
Publikováno v:
International Journal of Polymer Science, Vol 2022 (2022)
The present study portrays the development of lightweight epoxy laminates filled with boron carbide (B4C) and lead (Pb) particles through a novel layered molding and curing route. Six different laminates of single and tri-layers were prepared with va
Externí odkaz:
https://doaj.org/article/0637b56db16841458e9c0d4cc60a3103
Publikováno v:
Materials, Vol 15, Iss 21, p 7534 (2022)
Solid particle erosion inevitably occurs if a gas–solid or liquid–solid mixture is in contact with a surface, e.g., in pneumatic conveyors. Nowadays, an erosive failure of the component after the usage of a long period has been gaining the intere
Externí odkaz:
https://doaj.org/article/a806bd185d90494db41bc9c1457c2eb8
Publikováno v:
Defence Technology, Vol 15, Iss 3, Pp 338-343 (2019)
In the present work, the surface characteristics of Electrical Discharge Machined (EDM) Al (6351)SiC and Al (6351)SiCB4C composites are investigated. The composites are prepared by employing the conventional stir casting technique, as it can
Externí odkaz:
https://doaj.org/article/2107c3b2e7d848cdab62a04c5f10a6d2
Autor:
Temel Varol
Publikováno v:
Pamukkale University Journal of Engineering Sciences, Vol 24, Iss 4, Pp 635-642 (2018)
Bu çalışmada mekanik öğütme yöntemi ile kaba toz boyutuna sahip Al2O3 (Alüminyum Oksit) tozlarından mikronaltı ve nano toz boyutuna sahip Al2O3 tozlarının üretimi amaçlanmıştır. Aynı zamanda mekanik öğütme işlemine tabi tutulan
Externí odkaz:
https://doaj.org/article/81dac6baeca148b78104d518459ed21d
Publikováno v:
Düzce Üniversitesi Bilim ve Teknoloji Dergisi. 11:111-124
Al esaslı alaşımlar havacılık, otomotiv ve savunma sanayi gibi birçok sektörde kullanılmaktadır. Düşük yoğunlukları ve yüksek özgül mukavemet özellikleri, Al ve alaşımlarını mühendislik malzemeleri olarak kullanılabilir hale g
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5f3cb166283ead6805bd79d277776dd3
https://doi.org/10.29130/dubited.1019419
https://doi.org/10.29130/dubited.1019419
Autor:
Temel VAROL, Yaşam KANDEMİR
Publikováno v:
Volume: 12, Issue: 2 946-963
The Black Sea Journal of Sciences
Karadeniz Fen Bilimleri Dergisi
The Black Sea Journal of Sciences
Karadeniz Fen Bilimleri Dergisi
Düşük yoğunluk, yüksek sertlik, iyi aşınma direnci ve yüksek özgül mukavemet özelliklerine sahip olan Metal matris kompozitler ileri mühendislik malzemelerinin önemli bir türüdür ve bu özelliklerinden dolayı özellikle otomotiv, sav
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::d1f6c10629dd314881f3b9c0d1ac380f
https://doi.org/10.31466/kfbd.1177161
https://doi.org/10.31466/kfbd.1177161