Zobrazeno 1 - 10
of 97
pro vyhledávání: '"Tatsuo Kanki"'
Publikováno v:
Developments in Chemical Engineering and Mineral Processing. 11:539-555
The mechanism of interfacial reaction was discussed based on the constituent of the crystal film which forms at the interface and the practical behavior of interfacial tension with the aid of intermolecular potential determined by ab initio molecular
Publikováno v:
Developments in Chemical Engineering and Mineral Processing. 11:445-464
In order to establish the optimum condition for designing an electrolytic membrane flow reactor for producing strong acid water, a test reactor was developed. The pH, concentration of residual chlorine and oxidation reduction potential of the electro
Publikováno v:
Environmental Monitoring and Assessment. 115:395-403
In this study, the TiO2 photocatalytic decomposition process of aqueous phenol was investigated. The intermediate products generated in the elementary reaction steps in the mineralization process were experimentally identified as hydroquinone, catech
Publikováno v:
Chemical Engineering Journal. 108:155-160
TiO2-coated mm-size spherical ceramic particles which are very stable for dynamical impact and whose specific density is very near to unity were developed and applied to a fluidized bed reactor for water purification. Two types of test-scale fluidize
Autor:
Daisuke Yamamoto, Tatsuo Kanki, Kajornsak Faungnawakij, Tawatchai Charinpanitkul, Wiwut Tanthapanichakoon, Noriaki Sano
Publikováno v:
Chemical Engineering Journal. 103:115-122
A vertical wetted-wall corona discharge reactor was used for removal of acetaldehyde in air. The reactor consists of a wire cathode sustained at the center of a cylindrical anode. Acetaldehyde laden air was fed either upward or downward through the w
Autor:
Tatsuo Kanki, Kajornsak Faungnawakij, Tawatchai Charinpanitkul, Wiwut Tanthapanichakoon, Noriaki Sano, Daisuke Yamamoto
Publikováno v:
Chemical Engineering & Technology. 27:1115-1121
A cylindrical wetted-wall corona discharge reactor was used for the removal of acetaldehyde in gas mixtures of N 2 and O 2 . Gaseous acetaldehyde was removed from the gas stream by simultaneous absorption and gaseous corona reaction. The acetaldehyde
Publikováno v:
Journal of Applied Physics. 96:645-649
Forced convective jet applied onto carbon arc plasma has significant effects on the formation of carbon nanoparticles (CNPs) containing multiwalled carbon nanotubes mixed with multishelled nanoparticles produced by the “arc in water” method. Ther
Autor:
Atsushi Toyoda, Toru Kawashima, Tatsuya Fujimoto, Tatsuo Kanki, Noriaki Sano, Daisuke Yamamoto
Publikováno v:
Separation and Purification Technology. 37:169-175
The influence of dissolved several inorganic contaminants into water was examined on the decomposition of aqueous organic compounds by direct contact of gas corona discharge. It was found that addition of 0.01 mol l −1 NaOH into water significantly
Publikováno v:
Chemical Engineering & Technology. 27:548-552
Reaction byproducts from degradation of aqueous phenol by contact of gas d.c. corona discharge with treated water were analyzed by liquid chromatography. According to the retention time, three byproducts, pyrocatechol, hydroquinone, 1,4-benzoquinone,
Autor:
Wiwut Tanthapanichakoon, Tatsuo Kanki, Tawatchai Charinpanitkul, Hajime Tamon, Noriaki Sano, Masanori Fukuoka
Publikováno v:
Chemical Engineering & Technology. 27:171-175
A DC corona discharge reactor was applied to remove sulfur dioxide (SO2) and benzene (C6H6) from N2-O2-H2O mixed gas in the temperature range from room temperature to 400 °C. When SO2 was removed, the temperature elevation caused the decrease of the