Zobrazeno 1 - 10
of 21
pro vyhledávání: '"Takuto Kushi"'
Development of a Highly Efficient SOFC Module Using Two-stage Stacks and a Fuel Regeneration Process
Autor:
Tatsuki Dohkoh, Shirai Marie, Kume Takao, Takaaki Somekawa, Y. Ikeda, Taku Shumpei, Takahiro Ide, Nakajima Tatsuya, Kazuo Nakamura, Kei Ogasawara, Takuto Kushi, Kenjiro Fujita
Publikováno v:
Fuel Cells. 17:535-540
A solid oxide fuel cell (SOFC) module using two-stage stacks and a fuel regeneration process between them was developed in this study for the first time, to the best of the authors' knowledge. Upon configuring the first-stage and second-stage stacks
Publikováno v:
ECS Transactions. 78:2409-2418
SOFCs can achieve high electrical efficiency by utilizing steam reforming because the absorption reformate heat could be supplied from the heat from the stack and the anode off-gas combustor in the hotbox. However, water supply system leads to high m
Autor:
Takuto Kushi
Publikováno v:
International Journal of Hydrogen Energy. 42:9396-9405
The durabilities of a single solid oxide electrolysis cell (SOEC) and a solid oxide fuel cell (SOFC) operating at 0.3 A cm −2 and 973 K under different air supply conditions were investigated. In the SOEC, S penetration was observed mainly at the g
Autor:
Takuto Kushi
Publikováno v:
International Journal of Hydrogen Energy. 42:11779-11787
This study introduces a model for simulating solid oxide fuel cell (SOFC)–based processes to calculate heat balances of a dummy stack hotbox under dry and steam reforming conditions. Compared to the case of steam reforming, the steady-state dummy s
Publikováno v:
Applied Thermal Engineering. 114:1387-1392
Enhancing the power generation efficiency, which is the main advantage of solid oxide fuel cells (SOFCs), can have valuable benefits to introduce SOFC systems into business and industrial markets of Japan, where power demands are higher than thermal
Autor:
Takuto Kushi
Publikováno v:
International Journal of Hydrogen Energy. 41:17567-17576
The performance and durability of a single solid oxide fuel cell (SOFC) operating at 1023 K under differing reforming conditions and fed by CH4, CO2, and H2O were investigated. For dry reforming, the CO2/CH4 ratio was set to 2.7 to avoid coking in th
Publikováno v:
Ceramics
Volume 1
Issue 2
Pages 23-303
Volume 1
Issue 2
Pages 23-303
We evaluated the influence of aging on mechanical properties of 8% yttria-doped zirconia (8YSZ) from room temperature to 1200 K. The temperature dependence of the dynamic Young’s and shear moduli of 8YSZ with and without the aging treatment was inv
Publikováno v:
ECS Transactions. 65:25-31
Performance of the SOFC single cell with the CO2 reforming catalyst was investigated utilizing CH4/CO2. It was found that the voltage in CH4/CO2 was comparatively high against conventional steam reforming conditions even in high fuel utilization rang
Autor:
Kenjiro Fujita, Takuto Kushi
Publikováno v:
ECS Transactions. 57:709-716
The mechanical behavior of an anode-supported cell during reoxidation at high temperature was investigated using an X-ray computed tomography (CT) method. During reoxidation with no seal, warping of the anode-supported cell increased and a critical c
Publikováno v:
Journal of the American Ceramic Society. 95:2608-2613
Young's and shear moduli and Poisson's ratio of La0.6Sr0.4Co0.2Fe0.8O3−δ (LSCF6428), La0.6Sr0.4CoO3−δ (LSC), and La0.6Sr0.4FeO3−δ (LSF) were investigated in the temperature range from room temperature to 1173 K and in the oxygen partial pres