Zobrazeno 1 - 10
of 117
pro vyhledávání: '"Taik-Min Lee"'
Publikováno v:
Scientific Reports, Vol 13, Iss 1, Pp 1-14 (2023)
Abstract One of the advantages of inkjet printing in digital manufacturing is the ability to use multiple nozzles simultaneously to improve the productivity of the processes. However, the use of multiple nozzles makes inkjet status monitoring more di
Externí odkaz:
https://doaj.org/article/f98db9f116d04b90af9ed72c17b73168
Publikováno v:
Scientific Reports, Vol 12, Iss 1, Pp 1-11 (2022)
Abstract In printed electronics, flawless printing quality is crucial for electronic device fabrication. While printing defects may reduce the performance or even cause a failure in the electronic device, there is a challenge in quality evaluation us
Externí odkaz:
https://doaj.org/article/bca8758fbbce4d389afe07b4bf27a4f7
Autor:
Yunseok Jang, Jeongdai Jo, Seung-Hyun Lee, Inyoung Kim, Taik-Min Lee, Kyoohee Woo, Sin Kwon, Hyunchang Kim
Publikováno v:
Polymers, Vol 15, Iss 15, p 3301 (2023)
Attempts have been made to introduce microstructures or wrinkles into the elastomer surface to increase the sensitivity of the elastomer. However, the disadvantage of this method is that when a force is applied to the pressure sensor, the contact are
Externí odkaz:
https://doaj.org/article/64254be4c7fc4f138e6c3f4036540cb0
Autor:
Thanh Huy Phung, Anton Nailevich Gafurov, Inyoung Kim, Sung Yong Kim, Kyoung Min Kim, Taik-Min Lee
Publikováno v:
Scientific Reports, Vol 11, Iss 1, Pp 1-11 (2021)
Abstract With the development of technology, wireless and IoT devices are increasingly used from daily life to industry, placing demands on rapid and efficient manufacturing processes. This study demonstrates the fabrication of an IoT device using a
Externí odkaz:
https://doaj.org/article/3714f9f1b643421fbe17b50d1e66bb40
Autor:
Truong Sinh Nguyen, Anton Nailevich Gafurov, Jeongdai Jo, Taik-Min Lee, Seung-Hyun Lee, Kyunghoon Kim
Publikováno v:
Polymers, Vol 15, Iss 13, p 2909 (2023)
Micro- and nanofabrication on polymer substrate is integral to the development of flexible electronic devices, including touch screens, transparent conductive electrodes, organic photovoltaics, batteries, and wearable devices. The demand for flexible
Externí odkaz:
https://doaj.org/article/1500b2d17e6a49d6a4e7f77d6ef8c185
Autor:
Thanh Huy Phung, Anton Nailevich Gafurov, Inyoung Kim, Sung Yong Kim, Kyoung Min Kim, Taik-Min Lee
Publikováno v:
Polymers, Vol 15, Iss 12, p 2687 (2023)
Roll-to-roll (R2R) printing methods are well known as additive, cost-effective, and ecologically friendly mass-production methods for processing functional materials and fabricating devices. However, implementing R2R printing to fabricate sophisticat
Externí odkaz:
https://doaj.org/article/7dadce67e59c497c945c3d393d1e7bd5
Publikováno v:
Polymers, Vol 14, Iss 12, p 2515 (2022)
Unpredictable web temperature distributions in the dryer and strain deviations in the cross-machine (CMD) and machine (MD) directions could hamper the manufacture of smooth functional layers on polymer-based webs through the roll-to-roll (R2R) contin
Externí odkaz:
https://doaj.org/article/55933af91fde4253a847abed4855c78c
Publikováno v:
Applied Sciences, Vol 10, Iss 23, p 8636 (2020)
In roll-to-roll (R2R) processing, web uniformity is a crucial factor that can guarantee high coating quality. To understand web defects due to thermal deformation, we analyzed the effect of web unevenness on the coating quality of an yttria-stabilize
Externí odkaz:
https://doaj.org/article/fde9780636f049beb1a07fd8364e1991
Autor:
Young Tae Cho, Yeonho Jeong, Youn Jae Kim, Sin Kwon, Seung-Hyun Lee, Kwang Young Kim, Dongwoo Kang, Taik-Min Lee
Publikováno v:
Applied Sciences, Vol 7, Iss 12, p 1302 (2017)
Printed electronics is one of the emerging technologies owing to its low cost and productivity. Recently, many researchers tried to adapt printing technology to the fabrication of fine electronic patterns on flexible substrates, including the gate li
Externí odkaz:
https://doaj.org/article/810dcf96758e439090c46bf024be854a
Publikováno v:
International Journal of Precision Engineering and Manufacturing-Green Technology. 10:339-352
Screen printing has been adopted for fabricating a wide variety of electronic devices. However, the printing defects and reliability have been an obstacle for industrialization of printed electronics. In this research, the artificial intelligence (AI