Zobrazeno 1 - 10
of 12
pro vyhledávání: '"Taher Rabizadeh"'
Autor:
Taher Rabizadeh
Publikováno v:
CrystEngComm. 25:935-944
HEMPA has the potential to mitigate gypsum scaling through chelation with Ca2+ in solution and adsorption onto and incorporation into the crystals.
Autor:
Mahdi Yeganeh, Taher Rabizadeh, Mohammad Sajad Rabiezadeh, Maryam Kahvazizadeh, Hossein Ramezanalizadeh
Publikováno v:
Polymer Bulletin. 80:4209-4227
Autor:
Nasser Pourmohammadie Vafa, Taher Rabizadeh, Mahdi Ghassemi Kakroudi, Mehdi Shahedi Asl, Masoumeh Dehghanzadeh Alvari
Publikováno v:
Ceramics International. 46:3725-3730
A ZrB2–20 vol% SiC–5 vol% TaC ceramic was sintered through the hot pressing process. By sintering for 60 min at 1850 °C under 40 MPa in a vacuum atmosphere, an almost fully dense specimen with a relative density of 97.5% was achieved. The phase
Publikováno v:
Protection of Metals and Physical Chemistry of Surfaces. 55:936-941
A WC-17 wt % Co coating was deposited onto a ST37 mild steel substrate by HVOF-spray technique and then vacuum heat treated at 1100°C. The cross sectional microstructure of the produced coating was characterized before and after heat treatment by op
Autor:
Taher Rabizadeh, Shahin Khameneh Asl
Publikováno v:
Journal of Molecular Liquids. 276:694-704
In this research, the effects of casein on the corrosion behavior of mild steel in 0.1 M HCl were investigated by different analytical techniques. According to weight loss measurements, an increase in the concentration of casein from 50 ppm to 400 pp
Autor:
Taher Rabizadeh, Shahin Khameneh Asl
Publikováno v:
Materials and Corrosion. 70:738-748
Publikováno v:
Journal of Alloys and Compounds. 736:17-21
A novel in-situ Fe-based metallic glass matrix composite with a composition of Fe77Mo5P9C7.5B1.5 was developed by injection casting. Scanning electron microscopy (SEM) and X-Ray diffraction (XRD) confirmed the presence of α-Fe dendrites as a seconda
Publikováno v:
Surface Topography: Metrology and Properties. 9:025030
In this research, the pack cementation method was employed to apply a uniform aluminide coating on a substrate of nickel-based superalloy. The obtained intermetallic coating was synthesized using a pack containing 18Al–80Al2O3–2NH4Cl (wt.%) as th
Publikováno v:
Surface and Coatings Technology. 397:125949
In this study, aluminide coatings were successfully synthesized on the nickel-based Inconel-600 superalloy substrates using the pack cementation method. The coatings were produced from the packs containing different amounts of Al in the range of 10 w
Publikováno v:
International Journal of Refractory Metals and Hard Materials. 90:105232
The high-density Ti3SiC2-SiC composites with different SiC volume contents were fabricated by hot pressing technique under 35 MPa in a vacuum atmosphere at 1550 °C for 30 min. Microstructural observation showed that the distribution of SiC particula