Zobrazeno 1 - 10
of 186
pro vyhledávání: '"Ta-Wui Cheng"'
Publikováno v:
Materials, Vol 17, Iss 5, p 1181 (2024)
Geopolymers (GPs) are gaining prominence due to their low carbon emissions and sustainable attributes. However, one challenge with GPs, particularly those made with ground granulated blast furnace slag (GGBFS), is their significant shrinkage during t
Externí odkaz:
https://doaj.org/article/b51f28dddaf848d3bab3114abf1d912c
Publikováno v:
Polymers, Vol 14, Iss 16, p 3386 (2022)
Geopolymer (GP) has been considered a potential material to replace ordinary Portland cement (OPC) because of its excellent mechanical properties and environmentally friendly process. However, the promotion of GP is limited due to the large shrinkage
Externí odkaz:
https://doaj.org/article/a7c920f4a6c241fc84f4247f634eb408
Synthesis Metakaolin-Based Geopolymer Incorporated with SiC Sludge Using Design of Experiment Method
Publikováno v:
Polymers, Vol 14, Iss 16, p 3395 (2022)
This study uses metakaolin, sodium hydroxide, sodium metasilicate, and water content as the reaction variables in the application of the design of experiment (DOE) method. At the same time, the various component factors and their interactions were an
Externí odkaz:
https://doaj.org/article/e4c3eff1e1d44c59815a4c39d3efeb9a
Publikováno v:
Polymers, Vol 13, Iss 22, p 4029 (2021)
This study used silicon carbide sludge (SCS) to prepare lightweight foaming geopolymer materials (FGPs) by the direct foaming method. Results showed that when the SCS replacement level was 10%, the bulk density of the lightweight FGPs with added foam
Externí odkaz:
https://doaj.org/article/62006ea0cf39474ca7f7186082b4110b
Publikováno v:
Materials, Vol 14, Iss 20, p 5940 (2021)
This study explores the practicability of using drill cutting (DC) as raw material to fabricate building bricks through the high-temperature sintering method and low-temperature geopolymeric setting (LTGS) process. Drilling mud can be recycled and re
Externí odkaz:
https://doaj.org/article/24686d884c32421197ade14d0a83f2ac
Publikováno v:
Sustainable Environment Research, Vol 27, Iss 5, Pp 251-257 (2017)
This study investigated the feasibility of using waste limestone sludge, waste stone sludge, iron oxide sludge, and spent catalyst as raw materials in the production of eco-cement. The compressive strength development of the Eco Cement-A (ECO-A) past
Externí odkaz:
https://doaj.org/article/16dfa085f7b1431bb22d795e2323a058
Autor:
Yeou-Fong Li, Kun-Fang Lee, Gobinathan Kadagathur Ramanathan, Ta-Wui Cheng, Chih-Hong Huang, Ying-Kuan Tsai
Publikováno v:
Materials, Vol 14, Iss 4, p 972 (2021)
The impact load, such as seismic and shock wave, sometimes causes severe damage to the reinforced concrete structures. This study utilized different lengths of chopped carbon fibers to develop a carbon-fiber-reinforced mortar (CFRM) and carbon-fiber-
Externí odkaz:
https://doaj.org/article/daef249365984c88962258636da9cf71
Publikováno v:
Journal of Material Cycles and Waste Management. 24:1009-1019
Autor:
Yeou-Fong Li, Ya-Xuan Xie, Jin-Yuan Syu, Chih-Hong Huang, Hsin-Hua Tsai, Ta-Wui Cheng, Yen-Chun Chen, Wei-Hao Lee
Publikováno v:
Sustainability, Vol 14, Iss 164, p 164 (2022)
Sustainability; Volume 14; Issue 1; Pages: 164
Sustainability; Volume 14; Issue 1; Pages: 164
Many studies have shown that paint with reflective heat can effectively reduce the temperature of the building envelope and reduce the future energy consumption of the building. This study inspired the next-generation inorganic geopolymer material (I
Publikováno v:
Environmental Progress & Sustainable Energy. 42