Zobrazeno 1 - 10
of 274
pro vyhledávání: '"TTCP"'
Publikováno v:
INCAS Bulletin, Vol 14, Iss 1, Pp 69-78 (2022)
In this paper, the investigation was performed to determine the effect of leading-edge angle and leading-edge sweep on the aerodynamic coefficients of the projectile geometry and analyze the effect of roll moment on the fins at various operating cond
Externí odkaz:
https://doaj.org/article/136ff4b94fa947dda1bfe1679f5620d4
Publikováno v:
Journal of Functional Biomaterials, Vol 13, Iss 2, p 34 (2022)
Orthopedic and craniofacial surgical procedures require the reconstruction of bone defects caused by trauma, diseases, and tumor resection. Successful bone restoration entails the development and use of bone grafts with structural, functional, and bi
Externí odkaz:
https://doaj.org/article/0ddf440621894dcd93ca5ce4937b7982
Publikováno v:
EAI Endorsed Transactions on Cloud Systems, Vol 4, Iss 13 (2018)
Consultative Committee for Space Data Systems (CCSDS) complied Telemetry and Telecommand Processor’s (TTCP) development was taken up by Spacecraft Checkout Group (SCG) of U. R. Rao Satellite Centre, Indian Space Research Organization (ISRO) as a pa
Externí odkaz:
https://doaj.org/article/2cf0578a9b71447f8a7f72c3721128a3
Autor:
Eliria Maria de Jesus Agnolon Pallone, Fabio Caixeta Nunes, Gelson José Andrade da Conceição, Julieta Adriana Ferreira, Mylena Ayo Maia, Kátia Helena dos Santos
Publikováno v:
Repositório Institucional da USP (Biblioteca Digital da Produção Intelectual)
Universidade de São Paulo (USP)
instacron:USP
Universidade de São Paulo (USP)
instacron:USP
This study investigated the influence of Sr2+ ions incorporation in calcium phosphates formation on the surface of Al2O3/ZrO2 (5 vol%) nanocomposites. For this, Al2O3/ZrO2 samples were shaped, calcined (400 °C for 1 h), and sintered (1500 °C for 2
Publikováno v:
Journal of the European Ceramic Society. 41:7301-7310
The sintering behaviour and microstructural evolution of two batches of a commercial calcium-deficient hydroxyapatite powder were investigated. First, the sintered density as a function of the starting particle size distribution was studied, and the
Autor:
A. A. Radyuk, Vladimir S. Komlev, T. R. Chueva, A. B. Mikhailova, V. F. Shamray, V. I. Kalita, M. S. Chernov, N. V. Gamurar, D. I. Komlev, V. N. Sokolov
Publikováno v:
Inorganic Materials: Applied Research. 12:1236-1242
Changes in the structure and phase composition of the hydroxyapatite (HA) plasma coating were established during deposition at the initial temperatures of 20 and 550°C of the titanium substrate and a deposition distance of 95 and 150 mm. The structu
Publikováno v:
Ceramics International. 47:17652-17661
Tetracalcium phosphate (TTCP) is considered as an ideal potential implant biomaterial due to its good biodegradability, biocompatibility and bioactivity, while the insufficient mechanical properties limit its use in loading-bearing implants. In this
Autor:
Muralithran G. Kutty, Noor Azlin Yahya, Noor Hayaty Abu Kasim, Wan Haliza Binti Abd Majid, Mohamed Abdulmunem, Ali Dabbagh, Hadijah Abdullah
Publikováno v:
Sains Malaysiana. 50:1089-1099
Titanium-hydroxyapatite (Ti-HA) based composites have been widely investigated as viable materials to be used in dentistry. However, sintering of these composites is very challenging due to decomposition of HA and oxidation of Ti. The objective of th
Publikováno v:
Journal of Biomedical Materials Research Part B: Applied Biomaterials. 108:1669-1678
Calcium phosphate cement (CPC) is widely used as a repair material for bone defects. However, there is no report on the use of biphasic CPC combined with dental pulp stem cells (DPSCs) for bone tissue engineering. The aim of this study was to constru
Publikováno v:
Journal of Wuhan University of Technology-Mater. Sci. Ed.. 35:449-454
A post-treatment of hydrothermal process was conducted to evaluate its effects on the material characteristics and mechanical properties of plasma-sprayed pure HA and HA/20% YSZ coatings. Surface morphology and microstructural changes, relative eleme