Zobrazeno 1 - 10
of 24
pro vyhledávání: '"Svetislav Marković"'
Publikováno v:
Tehnički Vjesnik, Vol 28, Iss 1, Pp 240-247 (2021)
A theoretical film rupture model was used for computational procedure to predict the crack growth rate within the Stress Corrosion Cracking (SCC) conditions. Chemical, electrochemical and mechanical aspects of the SCC were analyzed and set into the c
Externí odkaz:
https://doaj.org/article/67b8d2883b374a22a463bf255593a1e8
Autor:
Svetislav Marković, Vukić Lazić, Dušan Arsić, Ružica R. Nikolić, Djordje Ivković, Robert Ulewicz, Otakar Bokuvka
Publikováno v:
Materials, Vol 15, Iss 21, p 7795 (2022)
Hard-facing as a type of the coating depositing is increasingly used today. Physical-chemical-metallurgical characteristics of contact layers in tribo-mechanical systems depend on the operating conditions and the conditions under which the work surfa
Externí odkaz:
https://doaj.org/article/7befbd909d844e86917edd6d91ec1226
Autor:
Svetislav Marković, Dušan Arsić, Ružica R. Nikolić, Vukić Lazić, Branislav Hadzima, Vladimir P. Milovanović, Renata Dwornicka, Robert Ulewicz
Publikováno v:
Materials, Vol 14, Iss 15, p 4203 (2021)
Numerous phenomena that occur during the process of machine parts’ regeneration have a significant impact on the loss of their working ability. Therefore, the properties of the working surfaces of the teeth flanks of repaired gears were analyzed in
Externí odkaz:
https://doaj.org/article/dfb0aedb490c4087a84880d6d3721662
Autor:
Svetislav Marković, Dušan Arsić, Ružica R. Nikolić, Vukić Lazić, Nada Ratković, Branislav Hadzima, Janusz Szmidla, Robert Ulewicz
Publikováno v:
Materials, Vol 14, Iss 6, p 1496 (2021)
This paper presents the results of voluminous experimental investigations conducted to analyze the influence of the welding procedure on the performance of regenerated gears. Cylindrical spur gears were tested, both newly manufactured and regenerated
Externí odkaz:
https://doaj.org/article/6e5c0b0359554311a4a35fbf5edd222c
Autor:
Svetislav Marković
Publikováno v:
Vojnotehnički Glasnik, Vol 44, Iss 1, Pp 92-103 (1996)
Diagnostic checking of machine parts and systems is a very important overhaul and regeneration operation; based on its results appropriate regeneration or repair procedures are carried out. The up-to-date diagnostic methods are presented, direct (usi
Externí odkaz:
https://doaj.org/article/595c4c7881ff47ec89c4755f99b0c9df
Autor:
Svetislav Marković
Publikováno v:
Vojnotehnički Glasnik, Vol 43, Iss 4, Pp 521-525 (1995)
Danas postoji prilično veliki broj različitih konstrukcija uređaja za ispitivanje pužnih prenosnika. To je velika pogodnost, jer ta raznovrsnost omogućava izbor optimalne konstrukcije uređaja za zahtevane uslove ispitivanja. Za ispitivanje puž
Externí odkaz:
https://doaj.org/article/7075b53d5c174421b479f692d289f01c
Autor:
Svetislav Marković
Publikováno v:
Vojnotehnički Glasnik, Vol 43, Iss 2, Pp 188-193 (1995)
Od uređaja sa kočnicom najčešće su u primeni uređaji sa električnim kočenjem sa ponovnim iskorišćavanjem (rekuperacijom) električne energije u električnoj mreži. Programirano opterećenje kod uređaja sa kočnicom se jednostavno ostvaruj
Externí odkaz:
https://doaj.org/article/4514950070e446058ae76696b75b8aeb
Autor:
Svetislav Marković
Publikováno v:
Vojnotehnički Glasnik, Vol 43, Iss 1, Pp 76-92 (1995)
Postojanje velikog broja različitih uređaja za ispitivanje zupčastih prenosnika omogućava izbor optimalne konstrukcije za zahtevane uslove ispitivanja. Uređaji sa zatvorenim kolom opterećenja primenjuju se u ispitivanju prenosnika za koje su po
Externí odkaz:
https://doaj.org/article/bba099228a82400daa9a601ab83f0253
Autor:
Vukić Lazić, Dušan Arsić, Ružica R. Nikolić, Robert Ulewicz, Branislav Hadzima, Svetislav Marković
Publikováno v:
Production Engineering Archives. 27:257-264
During the process of regeneration of machine parts, certain phenomena occur that have a significant impact on the loss of their working ability. Hereditary properties are expressed by the interdependence of geometric and physical-mechanical-metallur
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f50e41cc91e05514354ca9e4efda6e00
https://doi.org/10.30657/pea.2021.27.34
https://doi.org/10.30657/pea.2021.27.34
Autor:
Robert Ulewicz, Branislav Hadzima, Vladimir P. Milovanović, Renata Dwornicka, Dušan Arsić, Ružica R. Nikolić, Svetislav Marković, Vukić Lazić
Publikováno v:
Materials, Vol 14, Iss 4203, p 4203 (2021)
Materials
Volume 14
Issue 15
Materials
Volume 14
Issue 15
Numerous phenomena that occur during the process of machine parts’ regeneration have a significant impact on the loss of their working ability. Therefore, the properties of the working surfaces of the teeth flanks of repaired gears were analyzed in
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::c7c7977818b7eb9900d64801591d4d6a
https://www.mdpi.com/1996-1944/14/15/4203
https://www.mdpi.com/1996-1944/14/15/4203