Zobrazeno 1 - 10 of 64 pro vyhledávání: '"Surappa, MK"'
2
Processing and properties of $Al-Li-SiC_p$ composites
Autor: Bauri, Ranjit, Surappa, MK
$Al-Li-SiC_p$ composites were fabricated by a modified version of the conventional stir casting technique. Composites containing 8, 12 and 18 vol% SiC particles $(40 \mu m)$ were fabricated. Hardness, tensile and compressive strengths of the unreinfo
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=dedup_wf_001::39a37eeb487aa0f1df5c1da6566d1faa
http://eprints.iisc.ernet.in/15456/
Zobrazit plný text záznamu
3
Tribological behavior of $Al-Si/SiC_p$ composites/automobile brake pad system under dry sliding conditions
Autor: Uyyuru, RK, Surappa, MK, Brusethaug, S
Publikováno v: IndraStra Global.
Tribological behavior of stir-cast $Al-Si/SiC_p$ composites against automobile brake pad material was studied using Pin-on-Disc tribo-tester. The Al-metal matrix composite (Al-MMC) material was used as disc, whereas the brake pad material forms the p
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=dedup_wf_001::6fda56e19433cc281a6e86e2284a2cf5
http://eprints.iisc.ac.in/13337/1/ar2.pdf
Zobrazit plný text záznamu
4
Hot hardness and indentation creep study on Al5% Mg alloy matrixB4C particle reinforced composites
Autor: Khana, Kirity Bhusan, Kutty, TRG, Surappa, MK
Publikováno v: IndraStra Global.
Al5% Mg matrix composites reinforced with 10 and 20% B4C were prepared by stir casting method. Microhardness of unreinforced alloy and composites were measured using a Nikon hot hardness tester. It was observed that hardness values decrease gradually
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=issn23813652::991c7599616797bd9b0d2e1f6ece9d67
https://igi.indrastra.com/items/show/196675
Zobrazit plný text záznamu
6
Relating microtexture and dynamic micro hardness in an extruded AA8090 alloy and AA8090-8 vol% $SiC_{p}$ composite
Autor: Bauri, R, Pancholi, V, Samajdar, I, Surappa, MK
Publikováno v: IndraStra Global.
The present study involves combined measurements of microtexture and dynamic ultra micro hardness (DUH) in hot extruded AA8090 aluminum alloy and its composite reinforced with 8 vol% SiCp. Both the materials show strong crystallographic fiber texture
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=issn23813652::49ed898fcd38f9f395e7e46b4207f645
http://eprints.iisc.ac.in/17289/1/STAM_6_8_A11.pdf
Zobrazit plný text záznamu
7
Dry sliding wear behavior of $Al_{2}O_{3}$ fiber reinforced aluminum composites
Autor: Iwai, Y, Honda, T, Miyajima, T, Iwasaki, Y, Surappa, MK, Xu, JF
Publikováno v: IndraStra Global.
Dry sliding wear behavior of die-cast ADC12 aluminum alloy composites reinforced with short alumina fibers were investigated by using a pin-on-disk wear tester. The Al2O3 fibers were 4 mu m in diameter and were present in volume fractions (T-f)rangin
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=dedup_wf_001::c7fb369a0278659a2e2c6b6b68d30c23
https://igi.indrastra.com/items/show/202041
Zobrazit plný text záznamu
8
Fabrication and characterisation of pure magnesium-30 vol.% $SiC_P$ particle composite
Autor: Saravanan, RA, Surappa, MK
Publikováno v: IndraStra Global.
Pure magnesium-30 Vol.% SiC particle composite are fabricated by melt stir technique without the use of a flux or protective inert gas atmosphere. After hot extrusion with an extrusion ratio of 13, Mg-30 vol.% $SiC_P$ composites have been evaluated f
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=issn23813652::212a88116a14d4610acea459886e1265
http://eprints.iisc.ac.in/8084/1/Fabrication_and_characterisation_of_pure.pdf
Zobrazit plný text záznamu
9
The studies on micro-structural defects in deformed composite matrix of Al-Si-Mg and SiC
Autor: Karmakar, G, Sen, R, Meikap, AK, Chattopadhyay, SK, Chatterjee, SK, Surappa, MK
Publikováno v: IndraStra Global.
Detailed Fourier line shape analysis has been performed on three different compositions of the composite matrix of Al-Si-Mg and SiC. The alloy composition in wt% is Al-7%Si, 0.35%Mg, 0.14%Fe and traces of copper and titanium (similar to 0.01%) with S
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=issn23813652::05aca0c1342ad5f54bc7f2ad543c2d95
https://igi.indrastra.com/items/show/198505
Zobrazit plný text záznamu
10
Particle redistribution and matrix microstructure evolution during hot extrusion of cast SiCp reinforced aluminium alloy matrix composites
Autor: Dutta, B, Samajdar, I, Surappa, MK
Publikováno v: IndraStra Global.
The aim of the present investigation is to understand particle redistribution and matrix microstructure development during hot extrusion of aluminium matrix composites and the influence of process parameters on these two key microstructural features.
Externí odkaz: https://explore.openaire.eu/search/publication?articleId=issn23813652::163cae91c2fc457175c99808da175a6a
https://igi.indrastra.com/items/show/195529
Zobrazit plný text záznamu

Vyhledávací nástroje:

Upřesnit hledání

Omezení vyhledávání
Plný text Recenzováno Digitální knihovna AV ČR
Zdroje