Zobrazeno 1 - 10
of 17
pro vyhledávání: '"Sun-Yeo Mun"'
Publikováno v:
Applied Sciences, Vol 12, Iss 23, p 12278 (2022)
In this study, experiments and numeric studies were conducted to analyze the causes of abnormal behavior in temperature, heat flux, and combustion efficiency that occurred before a compartment fire was converted to the under-ventilated condition. The
Externí odkaz:
https://doaj.org/article/6c6fe983543a4e1dbe6e33427b1b62fc
Publikováno v:
Applied Sciences, Vol 11, Iss 13, p 5942 (2021)
The effects of changes in irradiance level (external heat flux), exhaust flow rate, and hood height on CO and soot yield were examined using a cone calorimeter. Black acrylic, having similar constituents as polymethyl methacrylate, was used as a comb
Externí odkaz:
https://doaj.org/article/ccbeec73edf94bbcb5397ef60fa790e0
Publikováno v:
Fire Science and Engineering. 36:29-37
In this study, measurements and a review of the pyrolysis properties required for fire spread simulations of rigid spray polyurethane foam (SPF) were performed. The change in the mass ratio of the hardener and resin during the foaming of the SPF had
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::da478c4aa734de50871586d8e97b957a
https://doi.org/10.7731/kifse.ef1b32a9
https://doi.org/10.7731/kifse.ef1b32a9
Publikováno v:
Fire Science and Engineering. 36:38-47
The analysis and review of the thermal decomposition properties required for the fire spread simulation of cables composed of multiple materials were performed. Thus, a typical two-step pyrolysis reaction was identified independent of cable type. It
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::46a92f5b38779033cb7605bf11ad9385
https://doi.org/10.7731/kifse.25b7572e
https://doi.org/10.7731/kifse.25b7572e
Publikováno v:
Fire Science and Engineering. 34:27-33
Physical quantities such as mass loss rate, heat release rate, and total heat release are often measured through a cone calorimeter (a representative bench-scale apparatus) and are primarily considered as values per unit area. Hence, the uniformity o
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::64c0d9d43542ded13be2871a0b202fcc
https://doi.org/10.7731/kifse.ad1befcd
https://doi.org/10.7731/kifse.ad1befcd
Publikováno v:
Fire Science and Engineering. 34:35-42
The accurate prediction of fire detector activation time is required to ensure the reliability of fire modeling during the safety assessment of performance-based fire safety design. The main objective of this study is to determine the activation temp
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::32672df0de6c12cda8e43ec14bcb5d88
https://doi.org/10.7731/kifse.103eea8f
https://doi.org/10.7731/kifse.103eea8f
Autor:
Cheol-Hong Hwang, Sun-Yeo Mun
Publikováno v:
Fire science and engineering. 33:29-36
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b4ff2cd31a67829555c2a43f082c200a
https://doi.org/10.7731/kifse.2019.33.3.029
https://doi.org/10.7731/kifse.2019.33.3.029
Publikováno v:
Fire science and engineering. 33:76-84
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3e3114c3ef14881e4f0dfb91a7ef1eb9
https://doi.org/10.7731/kifse.2019.33.1.076
https://doi.org/10.7731/kifse.2019.33.1.076
Autor:
Sun-Yeo Mun, Cheol-Hong Hwang
Publikováno v:
Materials, Vol 13, Iss 1712, p 1712 (2020)
Materials
Volume 13
Issue 7
Materials
Volume 13
Issue 7
Flame retardant cables were investigated using thermo-gravimetric analysis to measure the reference temperature and reference rate required for a fire spread simulation using a Fire Dynamics Simulator (FDS). Sensitivity analysis was also performed to
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::cf055e4b1ea837119db3db82f1342160
https://www.mdpi.com/1996-1944/13/7/1712
https://www.mdpi.com/1996-1944/13/7/1712
Publikováno v:
Fire Science and Engineering. 29:34-41
The applicability of plate thermometer (PT), which feature simple installation and low cost, was experimentally examined in steady and unsteady-state fire conditions. An infrared radiation heater and a square burner with C3H8 as fuel were used as hea
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::2cc15e4dcd655004d51670315bebd137
https://doi.org/10.7731/kifse.2015.29.5.034
https://doi.org/10.7731/kifse.2015.29.5.034