Zobrazeno 1 - 10
of 804
pro vyhledávání: '"Stainless Steel 316L"'
Publikováno v:
Journal of Materials Research and Technology, Vol 33, Iss , Pp 9092-9108 (2024)
Melting efficiency in welding is determined by various factors, including processing and operational parameters, the thermomechanical and chemical properties of the materials, surface conditions, and the type of energy source. This study uses a dimen
Externí odkaz:
https://doaj.org/article/a66f9017398e4efaadd9b574052b4416
Autor:
Mohammed A.S. Yousif, Ibrahim Abdullah Al-Deheish, Usman Ali, Syed Sohail Akhtar, Khaled S. Al-Athel
Publikováno v:
Journal of Materials Research and Technology, Vol 33, Iss , Pp 1220-1233 (2024)
In this study, 316L stainless steel Laser Powder Bed Fusion (LPBF) samples were manufactured under three different building orientations (0°, 45°, and 90°). Mechanical, microstructural, tribological and corrosion resistance properties were analyze
Externí odkaz:
https://doaj.org/article/58c1133fa713446ebd667fbe2a4e8b42
Autor:
Jiang, Cho-Pei, Masrurotin, Masrurotin, Ramezani, Maziar, Wibisono, Alvian Toto, Toyserkani, Ehsan, Macek, Wojciech
Publikováno v:
Rapid Prototyping Journal, 2024, Vol. 30, Issue 8, pp. 1624-1637.
Externí odkaz:
http://www.emeraldinsight.com/doi/10.1108/RPJ-04-2024-0163
Autor:
Vahid Amiri, Homam Naffakh-Moosavy
Publikováno v:
Journal of Materials Research and Technology, Vol 31, Iss , Pp 1164-1170 (2024)
This study aims to analyze the microstructure and present phases of functionally graded carbon steel - stainless steel 316L - Inconel 625 using experimental methods and computational software (JMatPro). Both FE-SEM and SEM-EDS equipment were employed
Externí odkaz:
https://doaj.org/article/f064d7bb148d47bfbffd98b7bf4f0c44
Publikováno v:
Virtual and Physical Prototyping, Vol 19, Iss 1 (2024)
This study investigated stress corrosion cracking (SCC) susceptibility in laser powder bed fusion (LPBF) printed 316L stainless steel under corrosive conditions. LPBF process inherently introduces residual stresses and surface defects that can compro
Externí odkaz:
https://doaj.org/article/2ff413cb7bff4d44a2cfac9da5df4621
Autor:
Aruntapan Dash, Amit Bandyopadhyay
Publikováno v:
Virtual and Physical Prototyping, Vol 19, Iss 1 (2024)
ABSTRACTBalancing strength and ductility is crucial for structural materials, yet often presents a paradoxical challenge. This research focuses on crafting a unique bimetallic structure, combining non-magnetic, stainless steel 316L (SS316L) with limi
Externí odkaz:
https://doaj.org/article/330ae5ad056e4503b3ab5b24b21f9f94
Publikováno v:
Engineering Reports, Vol 6, Iss 11, Pp n/a-n/a (2024)
Abstract Wire arc additive manufacturing (WAAM) is an efficient technique for producing medium to large‐size components, due to its accessibility and sustainability in fabricating large‐scale parts with high deposition rates, employing low‐cost
Externí odkaz:
https://doaj.org/article/e46618e9681146cf8529b6e4b865ebee
Autor:
Kaustubh Deshmukh, Alex Riensche, Ben Bevans, Ryan J. Lane, Kyle Snyder, Harold (Scott) Halliday, Christopher B. Williams, Reza Mirzaeifar, Prahalada Rao
Publikováno v:
Materials & Design, Vol 244, Iss , Pp 113136- (2024)
In this paper, we explain and quantify the causal effect of processing parameters and part-scale thermal history on the evolution of microstructure and mechanical properties in the laser powder bed fusion additive manufacturing of Stainless Steel 316
Externí odkaz:
https://doaj.org/article/55b3b3fc1c1944beacfbef1560917ab6
Publikováno v:
International Journal of Advanced Design and Manufacturing Technology, Vol 16, Iss 4, Pp 1-7 (2024)
In this study, the compressive stresses of dodecahedron diamond lattice structures have been investigated. The finite element method has been used for Stress analysis. After the simulation, it was found that more stresses are applied at the junction
Externí odkaz:
https://doaj.org/article/acc8db6b2d644f89a21b61b5da8a45a3
Autor:
Vahid Amiri, Homam Naffakh-Moosavy
Publikováno v:
Journal of Advanced Joining Processes, Vol 9, Iss , Pp 100194- (2024)
This work utilized a gradient method of joining plain carbon steel to stainless steel 316 L and then to Inconel 625 using wire arc additive manufacturing. The research investigated the quality of Functionally Graded Materials (FGM) structure, continu
Externí odkaz:
https://doaj.org/article/920182ee894740b4a4cb9a0be0a8332b