Zobrazeno 1 - 10
of 81
pro vyhledávání: '"Sohaib Z. Khan"'
Publikováno v:
Frontiers in Materials, Vol 9 (2022)
The main objective of this study is to design composite shells i.e. long, short, thin and thick for the different underwater applications. These shells can be a part of pressure hulls, underwater vehicles, pressurized tanks, underwater cables and und
Externí odkaz:
https://doaj.org/article/050e076b5e87495eab8c43475d4ea7d8
Publikováno v:
Frontiers in Bioengineering and Biotechnology, Vol 10 (2022)
Nanotechnology is considered one of the most significant advancements in science and technology over the last few decades. However, the contemporary use of nanomaterials in bioenergy production is very deficient. This study evaluates the application
Externí odkaz:
https://doaj.org/article/e1db4e1efea24ccb913a3d712c3b9ff7
Autor:
Hamad AlMohamadi, Abdulrahman Aljabri, Essam R.I. Mahmoud, Sohaib Z. Khan, Meshal S. Aljohani, Rashid Shamsuddin
Publikováno v:
Bulletin of Chemical Reaction Engineering & Catalysis, Vol 16, Iss 2, Pp 342-352 (2021)
Burning municipal solid waste (MSW) increases CO2, CH4, and SO2 emissions, leading to an increase in global warming, encouraging governments and researchers to search for alternatives. The pyrolysis process converts MSW to oil, gas, and char. This st
Externí odkaz:
https://doaj.org/article/927f7d9eb505407aac02079b6bfe93db
Publikováno v:
Ain Shams Engineering Journal, Vol 13, Iss 1, Pp 101542- (2022)
Wind energy is gaining popularity, especially across the countries with strong and continuous wind currents. Pakistan is bestowed with multiple wind corridors with prospective energy extraction, mainly concentrated along the coastline. This work aims
Externí odkaz:
https://doaj.org/article/07b143a12769466ca8c6f3698a331d34
Autor:
Muhammad N. Nawaz, Sohaib Z. Khan, Muhammad Asif, Abdulrahman Aljabri, Asad A. Zaidi, Essam R. I. Mahmoud
Publikováno v:
Lubricants, Vol 10, Iss 11, p 310 (2022)
This research focuses on the study of the simulation capabilities of the lagrangian (LAG) model and Smoothed Particle Hydrodynamics (SPH) model for the orthogonal dry machining of aluminum alloy Al6061-T6. A three-dimensional finite element model was
Externí odkaz:
https://doaj.org/article/e9d805400a8440e5b1eb73a4355bb8f9
Autor:
Farrukh Mustahsan, Sohaib Z. Khan, Asad A. Zaidi, Yaser H. Alahmadi, Essam R. I. Mahmoud, Hamad Almohamadi
Publikováno v:
Materials, Vol 15, Iss 22, p 8022 (2022)
This paper presents a modified re-entrant honeycomb auxetic structure. The structure is constructed by adding an additional horizontal member between the vertical and re-entrant member of the semi-re-entrant honeycomb model to increase the overall co
Externí odkaz:
https://doaj.org/article/c14b2a21c99d47c8921842626b4086d3
Autor:
Essam R. I. Mahmoud, Sohaib Z. Khan, Abdulrahman Aljabri, Hamad Almohamadi, Mohamed Abdelghany Elkotb, Mohamed A. Gepreel, Saad Ebied
Publikováno v:
Crystals, Vol 12, Iss 10, p 1413 (2022)
In this paper, the cladding of pure aluminum and a low-carbon steel alloy was performed through friction stir processing with minimal intermetallic compound formation. A 3 mm thick aluminum plate was clamped on top of a steel plate. A thick, pure cop
Externí odkaz:
https://doaj.org/article/d99dee28dd4c46bc97e636f490d5378c
Publikováno v:
Virtual and Physical Prototyping, Vol 14, Iss 4, Pp 360-370 (2019)
Compressive behaviour of Triply Periodic Minimal Surface type Neovius structure is investigated. The structure was manufactured by Fused Deposition Modelling (FDM) Additive Manufacturing technology in ABS material. The Neovius cellular structures wit
Externí odkaz:
https://doaj.org/article/8a21e373629346e1a43b05af73032628
Autor:
Essam R. I. Mahmoud, Hamad Almohamadi, Abdulrahman Aljabri, Sohaib Z. Khan, Ahmad N. Saquib, Mohammed Farhan, Mohammed Abdel-Ghani Elkotb
Publikováno v:
Materials, Vol 14, Iss 24, p 7611 (2021)
Friction Stir Processing (FSP) was used to fabricate metal matrix composite, based on steel and reinforced with nano-sized yttrium oxide powder. The powder was packed in a narrow longitudinal groove of 2 mm depth and 1 mm width cut in the steel plate
Externí odkaz:
https://doaj.org/article/6e072f70a50e4d10a1867255016b8609
Autor:
Hafiz Muhammad Waqas, Dongyan Shi, Lili Tong, Muhammad Imran, Sohaib Z. Khan, Waqas Ahmed, Shafiq R. Qureshi
Publikováno v:
Applied Sciences, Vol 11, Iss 1, p 214 (2020)
Fiber-reinforced polymer (FRP) composite bridges are usually constructed for rapid installation. The durability of the bridge is increased by stiffness, strength to weight ratio, and corrosion resistance. The main factors on which the design of the c
Externí odkaz:
https://doaj.org/article/c208fd1114c247cf9b186f630c18ce28