Zobrazeno 1 - 10
of 20
pro vyhledávání: '"Sofyan Djamil"'
Publikováno v:
Jurnal Ilmiah SINERGI, Vol 24, Iss 3, Pp 171-176 (2020)
In the machining of metal cutting, cutting tools are the main things that must be considered. Using improper cutting parameters can cause damage to the cutting tool. The damage is Built-Up Edge (BUE). The situation is undesirable in the metal cutting
Externí odkaz:
https://doaj.org/article/a29bdf4f2456469d861dc4ecb16e89c5
Publikováno v:
Jurnal Ilmiah SINERGI, Vol 20, Iss 1, Pp 27-35 (2016)
Penelitian ini dilaksanakan untuk mengetahui pengaruh posisi objek dalam pembuatan protipe cepat (rapid prototyping) dengan menggunakan 3D printing untuk bahan polymer PLA dan ABS terhadap kekuatan tarik maupun ketelitian dimensi yang dihasilkan. Unt
Externí odkaz:
https://doaj.org/article/31e91600053e40a9b482465ca816e041
Publikováno v:
Jurnal Energi Dan Manufaktur, Vol 7, Iss 1 (2015)
Abstrak : Komposit merupakan suatu struktur material yang terdiri dari dua atau lebih konstituen yangdikombinasikan secara makroskopi, kombinasi tersebut tidak saling melarutkan. Matrikmenggunakan polymer dan reinforcement berupa fiber bahan alam bam
Externí odkaz:
https://doaj.org/article/7e8b7c2e009f40d89808632f60384cda
Publikováno v:
Jurnal Muara Sains, Teknologi, Kedokteran dan Ilmu Kesehatan. 6:241-248
Spot welding is a method of electrical resistance welding in which two or more metal sheets are clamped between two electrodes and at the same time an electric current is applied so that the surface of the material reaches the welding temperature and
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5c45144c5fa9b9a2c61f89682e7dd70f
https://doi.org/10.24912/jmstkik.v6i2.13298
https://doi.org/10.24912/jmstkik.v6i2.13298
Publikováno v:
Jurnal Teknik Mesin Indonesia. 12:83-89
Komposit merupakan gabungan dari dua material atau lebih yang membentuk sifat baru. Komposit dengan bahan dasar material alam sangat terkenal belakangan ini, karena diharapkan hasil uji material komposit ini akan sekuat material besi. Dalam penelitia
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::92b8ee1b80021dd84276fe4a4b693607
https://doi.org/10.36289/jtmi.v12i2.77
https://doi.org/10.36289/jtmi.v12i2.77
Publikováno v:
POROS. 17:26
In the machining process, increased production can be done by increasing the use of cuttingparameters. However, the use of high cutting parameters has an effect on the wear of the cutting toolused. The aim of this research is to analyze the wear and
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a5c88fadefbf36aa056996b1cd8fa5bb
https://doi.org/10.24912/poros.v17i1.15394
https://doi.org/10.24912/poros.v17i1.15394
Publikováno v:
IOP Conference Series: Materials Science and Engineering. 1007:012170
This study aims to simulate the strength of the design of car power window panel products using ABS plastic material. Strength obtained from this simulation will be used as a reference in the development of power window panel products in cars using b
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4e985122dfad85aaa4eb0625841c7763
https://doi.org/10.1088/1757-899x/1007/1/012170
https://doi.org/10.1088/1757-899x/1007/1/012170
Publikováno v:
IOP Conference Series: Materials Science and Engineering. 1007:012095
The use of composite materials in the automotive industry aims to create new material that have advantage of good mechanical properties, environmentally friendly and cheaper. Composite is a combination of two or more materials that have good physical
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6eaaf30f90017c71af8deeefcb07db99
https://doi.org/10.1088/1757-899x/1007/1/012095
https://doi.org/10.1088/1757-899x/1007/1/012095
Publikováno v:
IOP Conference Series: Materials Science and Engineering. 852:012077
Composite of laminate is a type of composite consisting of two or more layers combined into one and each layer has special characteristics. This research is expected to increase the use value of bamboo so that in the future large industries can utili
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::08f32fef5ff5a5f32fc6e17593ed7505
https://doi.org/10.1088/1757-899x/852/1/012077
https://doi.org/10.1088/1757-899x/852/1/012077
Publikováno v:
IOP Conference Series: Materials Science and Engineering. 725:012039
Tool life is an important thing to consider in the process of metal cutting. Before the machining process is done, it is necessary to know how long a cutting tool is capable of cutting before wear occurs. However, it is difficult to predict the life
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e44db3040a4d64737da1ecb1d881d91e
https://doi.org/10.1088/1757-899x/725/1/012039
https://doi.org/10.1088/1757-899x/725/1/012039