Zobrazeno 1 - 10
of 20
pro vyhledávání: '"Sirisart Ouajai"'
Morphological, Thermal and Mechanical Properties of Poly(Lactic Acid)/Cellulose/ Nano-Clay Composite
Autor:
Sirisart Ouajai, Suttinun Phongtamrug
Publikováno v:
Key Engineering Materials. 856:331-338
This research has focused on the effect of modified cellulose and clay on the thermal and mechanical properties of PLA bio-nanocomposite. Cellulose was chemically modified with silane coupling agent in order to enhance compatiblization with PLA. Succ
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e722ce89d989d3bbfe3e7ea12bef1ec0
https://doi.org/10.4028/www.scientific.net/kem.856.331
https://doi.org/10.4028/www.scientific.net/kem.856.331
Autor:
Sirisart Ouajai, Suttinun Phongtamrug
Publikováno v:
Key Engineering Materials. 856:303-308
Poly(lactic acid) (PLA) is a potential biodegradable polymer to replace petroleum-based plastic, however, its main drawback is brittleness because of slow crystallization rate. To overcome this limitation, compounding with some additives is the most
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5e3928cfb1b668bddf26e8d9726e1ca6
https://doi.org/10.4028/www.scientific.net/kem.856.303
https://doi.org/10.4028/www.scientific.net/kem.856.303
Publikováno v:
Key Engineering Materials. 757:161-165
This research focused on the bioethanol production from rice husk via enzymatic hydrolysis and fermentation of glucose product. Rice husks were ball-milled, alkali pretreated with 2 %(w/v) NaOH for 3 hours and regenerated by N-methylmorpholine N-oxid
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f7de8f68d27c5796985f5c9ea46ebbc0
https://doi.org/10.4028/www.scientific.net/kem.757.161
https://doi.org/10.4028/www.scientific.net/kem.757.161
Publikováno v:
KMUTNB International Journal of Applied Science and Technology. :1-12
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::cb8f454bad00b7cb4767adf57f8e2ebd
https://doi.org/10.14416/j.ijast.2015.08.001
https://doi.org/10.14416/j.ijast.2015.08.001
Publikováno v:
KMUTNB International Journal of Applied Science and Technology. :1-7
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::47cfb608feda1eda2a157cb2c683baab
https://doi.org/10.14416/j.ijast.2015.07.003
https://doi.org/10.14416/j.ijast.2015.07.003
Autor:
Kitti Ongwongsakul, Robert A. Shanks, Peerachai Ruangwilairat, Sirisart Ouajai, Thanawadee Leejarkpai
Publikováno v:
Advanced Materials Research. :607-610
Oil palm empty fruit bunch (OPEFB) cellulose fibre has been widely used as a reinforcing filler in polymer composites. Surface modification of OPEFB fibre was aimed enhancing inter-phase adhesion with a poly(lactic acid) matrix. In this study, the OP
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8a893722316c4ec8ab5896c58293b6c5
https://doi.org/10.4028/www.scientific.net/amr.93-94.607
https://doi.org/10.4028/www.scientific.net/amr.93-94.607
Autor:
Robert A. Shanks, Sirisart Ouajai
Publikováno v:
Composites Science and Technology. 69:2119-2126
All-hemp ( Cannabis Sativa L.) cellulose composites were prepared by a mechanical blending technique followed by hot pressing and water–ethanol regeneration. The alkali treated fibres were ground and sieved to a size ranging from 45 μm to 500 μm.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a776381ce203e9bf81e0d80044d66e48
https://doi.org/10.1016/j.compscitech.2009.05.005
https://doi.org/10.1016/j.compscitech.2009.05.005
Autor:
Robert A. Shanks, Sirisart Ouajai
Publikováno v:
Macromolecular Materials and Engineering. 294:213-221
Cellulose acetate butyrate biocomposites, plasticized with tributyl citrate at volume fraction Vf = 0.1-0.3, were prepared with modified hemp. Inclusion of modified hemp fibres at Vf = 0.4 enhanced the modulus and strength of the flexible plasticized
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::175bd3a88aba03eddac87e025065de30
https://doi.org/10.1002/mame.200800266
https://doi.org/10.1002/mame.200800266
Autor:
Robert A. Shanks, Sirisart Ouajai
Publikováno v:
Cellulose. 13:31-44
The structural degradation of cellulose fibre from hemp (Cannabis Sativa L.) by a ball-milling process and the recrystallization behavior of the product were studied. A linear increase in the Brunauer–Emmett–Teller specific surface area was obser
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::29eaad7889cfa452a2e7d3143025dd8a
https://doi.org/10.1007/s10570-005-9020-5
https://doi.org/10.1007/s10570-005-9020-5
Autor:
Sirisart Ouajai, Robert A. Shanks
Publikováno v:
Polymer Degradation and Stability. 89:327-335
The thermal degradation behaviour of hemp ( Cannabis sativa L.) fibres under a nitrogen atmosphere was investigated by using thermogravimetry (TGA). The kinetic activation energy of treated fibres was calculated from TGA data by using a varied heatin
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a8222a6c3ccd844ae80e051834809edb
https://doi.org/10.1016/j.polymdegradstab.2005.01.016
https://doi.org/10.1016/j.polymdegradstab.2005.01.016