Zobrazeno 1 - 10
of 17
pro vyhledávání: '"Silvando Vieira dos SANTOS"'
Autor:
Danielle Sampaio Lisboa, Silvando Vieira dos Santos, Sandro Griza, João Lima Rodrigues, André Luis Faria-e-Silva
Publikováno v:
Brazilian Oral Research, Vol 27, Iss 1, Pp 73-75 (2013)
This study examined the effect of deproteinization on the bond strength between self-adhesive resin cements and dentin surfaces that were untreated (control), acid-etched, or acid-etched and subjected to a post-etch deproteinization treatment. Cylind
Externí odkaz:
https://doaj.org/article/6b90c4b9e6d54a2588f337aa99be9633
Autor:
Silvando Vieira dos Santos, Gustavo Dória Lima, Brenno Lima Nascimento, Lucas Silva Fontes, Sandro Griza
Publikováno v:
Tecnologia em Metalurgia, Materiais e Mineração. 18
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::80db7281043449c58de4f7c9949d43fe
https://doi.org/10.4322/2176-1523.20202453
https://doi.org/10.4322/2176-1523.20202453
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 230:2611-2622
The bolted joints fatigue behavior was analyzed by using torque as tightening method and steel and aluminum as members’ material. The bolt used in the current study was the M6 class 8.8. The bolt preload value was calculated based on the bolts’ e
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ceff1e5a4cb5f9beb8764f1dfbfcc5dc
https://doi.org/10.1177/0954406215611158
https://doi.org/10.1177/0954406215611158
Publikováno v:
ABM Proceedings.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ce661406f3d2deddb61f3f6f82639a0d
https://doi.org/10.5151/1516-392x-26418
https://doi.org/10.5151/1516-392x-26418
Autor:
Carlos Eduardo Celestino de Andrade, Sandro Griza, Abraão Santos Silva, Silvando Vieira dos Santos, Thiago Figueiredo Azevedo
Publikováno v:
Materials & Design, Vol 85, Iss, Pp 607-612 (2015)
The Ti35Nb2.5Sn alloy was obtained by vacuum arc melting. The alloy was homogenized and solubilized. It was then hot rolled with 40% reduction and quenched in water. Samples were also solubilized and quenched in water after hot rolling to check the p
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::c0a9ee27bfc99aec2026175c11772449
http://www.sciencedirect.com/science/article/pii/S0264127515301143
http://www.sciencedirect.com/science/article/pii/S0264127515301143
Autor:
Cleverson Luciano Trento, Pricila Rejane Silva Santos, Silvando Vieira dos Santos, Vanessa Tavares de Gois Santos, Sandro Griza, Allancardi dos Santos Siqueira
Publikováno v:
Revista de Odontologia da UNESP, Volume: 44, Issue: 2, Pages: 67-73, Published: APR 2015
Revista de Odontologia da UNESP v.44 n.2 2015
Revista de Odontologia da UNESP
Universidade Estadual Paulista (UNESP)
instacron:UNESP
Revista de Odontologia da UNESP, Vol 44, Iss 2, Pp 67-73
Revista de Odontologia da UNESP v.44 n.2 2015
Revista de Odontologia da UNESP
Universidade Estadual Paulista (UNESP)
instacron:UNESP
Revista de Odontologia da UNESP, Vol 44, Iss 2, Pp 67-73
Objetivo Analisar a resistência à fratura por fadiga dos conjuntos implante-pilar, nos tipos reto e angulado, submetidos a cargas cíclicas similares às mastigatórias. Material e método Foram utilizados 32 implantes (3,75 × 11 mm) com sistema c
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::cb8253cfc9de071d03d08934c362fa4a
https://doi.org/10.1590/1807-2577.1063
https://doi.org/10.1590/1807-2577.1063
Autor:
Tiago Nunes Lima, Silvando Vieira dos Santos, Ihana Gabriela Conceição de Jesus, Sandro Griza, Lucas Silva Fontes
Publikováno v:
Anais do Congresso Anual da ABM.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d6fe43e2285a8c2ae9749524135d3601
https://doi.org/10.5151/1516-392x-30893
https://doi.org/10.5151/1516-392x-30893
Autor:
Sandro Griza, Marcio Erick Gomes da Silva, Everton Pizzio, Silvando Vieira dos Santos, Telmo Roberto Strohaecker
Publikováno v:
Engineering Failure Analysis. 34:397-406
In this study we evaluated the effect of bolt length on the fatigue behavior of joints with bolt studs used in the flange/housing assembly of a gas compressor for polyethylene polymerization. The bolt stud used is the M24×3 class 8.8. Two different
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::bec2840016f011131728fd7cdf9cac34
https://doi.org/10.1016/j.engfailanal.2013.09.010
https://doi.org/10.1016/j.engfailanal.2013.09.010
Autor:
Silvando Vieira dos Santos, Sandro Griza, Thiago Figueiredo Azevedo, E.K. Tentardini, Telmo Roberto Strohaecker
Publikováno v:
Engineering Failure Analysis. 32:178-187
Screws are often used in total hip arthroplasty to increase the cementless acetabular metal-backed fixation stability. This study aimed at identifying metallurgical factors related to metal-backed screw fractures in two cases of premature total hip a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9503c30540f257c620b56dd84092d2e9
https://doi.org/10.1016/j.engfailanal.2013.03.021
https://doi.org/10.1016/j.engfailanal.2013.03.021
Autor:
Silvando Vieira dos Santos, Marcelo Massayoshi Ueki, Telmo Roberto Strohaecker, Fabiano Bertoni, Sandro Griza
Publikováno v:
Engineering Failure Analysis. 28:166-175
This paper presents a case of a collared, polished and cemented hip stem which presented premature fracture due to “cantilever beam” effect. The study consisted of radiographic analysis, fracture analysis, material characterization and S–N fati
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e29abe12f75374f1bd8aedcc8f52501c
https://doi.org/10.1016/j.engfailanal.2012.10.011
https://doi.org/10.1016/j.engfailanal.2012.10.011