Zobrazeno 1 - 10
of 459
pro vyhledávání: '"Sigma heat"'
Akademický článek
Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.
K zobrazení výsledku je třeba se přihlásit.
Autor:
Zaid Ahmed Al-Anber
Publikováno v:
Yanbu Journal of Engineering and Science. 6
In this work theoretical calculations had been made for suggested methods of heating mother liquor in a crystallizer for both kinds of evaporative crystallization process. These suggested designs aim to reduce and save the consumption of heat which l
Publikováno v:
Applied Thermal Engineering. 133:819-827
Experimental studies are carried out on a supercritical carbon dioxide based natural circulation loop (NCL) to investigate the loop behaviour under transient conditions. An electrical heater with controlled heat flux is used as the heat source, while
Publikováno v:
Renewable Energy. 115:217-225
Two sensible heat storage systems and two latent heat storage systems, in which liquid lead-bismuth eutectic alloy (LBE) is selected as sensible heat storage medium and sodium nitrate is selected as phase change storage material, are investigated for
Publikováno v:
Nie, J, Yuan, S, Fang, L, Zhang, Q & Li, D 2018, ' Experimental study on an innovative enthalpy recovery technology based on indirect flash evaporative cooling ', Applied Thermal Engineering, vol. 129, pp. 22-30 . https://doi.org/10.1016/j.applthermaleng.2017.09.139
An indirect flash evaporative cooling enthalpy recovery technology used for building ventilation was proposed based on counter flow plate heat exchanger combing with ultrasonic atomizer. The technology is aimed at enhancing enthalpy recover efficienc
Publikováno v:
Applied Thermal Engineering. 128:1331-1339
The effective heat capacity method and the enthalpy method are the two most common methods to build the numerical heat transfer models for phase change material (PCM) board. The objective of this research was to compare the PCM heat transfer models w
Autor:
Xiaoyun Xie, Yi Jiang
Publikováno v:
Energy. 141:2242-2250
A novel system for long-distance heat transportation that uses two types of absorption heat exchanger (AHE) is introduced in this paper. Using this system, industrial waste heat at 65–70 °C can be recovered and transported through long-distance pi
Publikováno v:
Computers & Chemical Engineering. 106:122-132
A potential cascaded vapor compression heat pump is proposed to address the high temperature heat demand in the copper chlorine (Cu-Cl) thermochemical cycle for hydrogen production. The configuration studied is a cuprous chloride CuCl vapor compressi
Publikováno v:
Applied Thermal Engineering. 126:976-986
The sensible heat transfer coefficient and flow resistance are two essential considerations in calculating vapor condensation in the presence of non-condensable gases. In this study, the effects of interfacial roughness on the sensible heat transfer
Autor:
N. Nethaji, S. Tharves Mohideen
Publikováno v:
Energy and Buildings. 155:215-224
An experimental work was conducted to observe the effects of incorporation of Loop Heat Pipes on energy consumption and dehumidification in a split Air Conditioning system. In this investigation, three Loop Heat Pipe units were fabricated and filled