Zobrazeno 1 - 10
of 36
pro vyhledávání: '"Shuvalov Aleksandr"'
Autor:
Emel’yanov Oleg, Shuvalov Aleksandr
Publikováno v:
E3S Web of Conferences, Vol 410, p 03020 (2023)
When determining the service life of cyclically loaded metal structures at the stage of fatigue crack development, an important role is played by the accuracy of assessing the plastic deformation zone size at the crack tip formed by the tensile overl
Externí odkaz:
https://doaj.org/article/a6b45c1a6a2c4878b6973e4f0faa23ca
Publikováno v:
E3S Web of Conferences, Vol 263, p 02016 (2021)
Article shows shear tests results for anchorage using bent foundation bolts 16, 24 and 36 mm in diameter and torque-controlled undercut anchors 12, 16 and 20 mm in diameter. Load-displacement diagrams were acquired for shear loads in static and dynam
Externí odkaz:
https://doaj.org/article/909b954778954a7381039347db29ff54
Publikováno v:
E3S Web of Conferences, Vol 263, p 02029 (2021)
Comparison of welding influence on structural strength of Al-Mg-Si alloy (AW6082-T6), supplied with 10 mm thick sheets, is made. Within the research tension and impact tests of welding joints, made with argon-arc and friction stir welding, were carri
Externí odkaz:
https://doaj.org/article/22c9a383a7de408480a8dac3db2bb95b
Autor:
Emel'yanov, Oleg, Shuvalov, Aleksandr
Publikováno v:
E3S Web of Conferences; 8/9/2023, Vol. 410, p1-8, 8p
Publikováno v:
AIP Conference Proceedings; 2023, Vol. 2791 Issue 1, p1-6, 6p
Publikováno v:
AIP Conference Proceedings; 2023, Vol. 2497 Issue 1, p1-10, 10p
Publikováno v:
E3S Web of Conferences, Vol 97, p 04062 (2019)
Mechanical properties of specimens were researched for model analysis of stress-strain behavior in the stress concentration zone for plate structures using aluminum alloys. Traditional and new structure materials including Russian (1915T and 1565ch)
Externí odkaz:
https://doaj.org/article/3fac214b99854c9a92797fbb20bedd81
Publikováno v:
MATEC Web of Conferences, Vol 193, p 03009 (2018)
The article presents the results of the experimental determination of the physical and mechanical characteristics of rubber-metal vibration-proof supports used in the construction of facilities in the areas of increased seismic hazard. The testing wa
Externí odkaz:
https://doaj.org/article/2c739af52ef546ae93d404e8a92e0fad
Publikováno v:
MATEC Web of Conferences, Vol 251, p 02043 (2018)
We needed to determine physical and mechanical characteristics of elastomeric bearings in order to create an accurate design models for structures mounted on elastomeric bearings. Methods and results of comparative tests for horizontal stiffness of e
Externí odkaz:
https://doaj.org/article/2c6ea995c6d240499ebd96d0744daa78
Publikováno v:
MATEC Web of Conferences, Vol 196, p 02049 (2018)
The results of the experimental studies of the vertical joint compliance used in the construction of the high-rise panel buildings are presented in this article. The vertical joints with various concrete grades, thickness of the panels, number and mu
Externí odkaz:
https://doaj.org/article/6370c3a9b50b4381bf381bdecca7e8a7