Zobrazeno 1 - 10
of 27
pro vyhledávání: '"Shouming Yu"'
Publikováno v:
Journal of Materials Research and Technology, Vol 29, Iss , Pp 857-863 (2024)
Dual-phase amorphous-nanocrystalline Al-x at.% Mo (x = 20, 26, 30) alloy films prepared in the way of dual-phase co-growth directly through magnetron sputtering were studied in terms of thermally induced microstructural evolution and mechanical prope
Externí odkaz:
https://doaj.org/article/f24a556f2021401e849e6979f9261dfa
Publikováno v:
Materials Research Express, Vol 7, Iss 10, p 106401 (2020)
MoS _x -Ti composite coatings with different S/Mo ratios were prepared by varying the substrate bias voltage of magnetron sputtering. It was found that the S/Mo ratio of the as-deposited MoS _x -Ti coating decreased gradually from 1.7 to 1.3 as subst
Externí odkaz:
https://doaj.org/article/c6bc433b14d342a79eb03528acb58c1b
Publikováno v:
Coatings; Volume 12; Issue 9; Pages: 1327
CrNx coatings with a low nitrogen content below 31.7 at.% were deposited using closed field unbalanced magnetron sputtering by varying the N2:Ar flow ratio. A dense and column-free CrNx coating was obtained at a nitrogen content of 14.8 at.%, whereas
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::8bccfb24455800d3519384438272b27e
Publikováno v:
Journal of Alloys and Compounds. 924:166592
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8b4f934490af8b003ff1506fccc0394f
https://doi.org/10.1016/j.jallcom.2022.166592
https://doi.org/10.1016/j.jallcom.2022.166592
Publikováno v:
International Journal of Fatigue. 159:106794
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::42f439e83ea6af7e816d54818b196c8b
https://doi.org/10.1016/j.ijfatigue.2022.106794
https://doi.org/10.1016/j.ijfatigue.2022.106794
Publikováno v:
Journal of Wuhan University of Technology-Mater. Sci. Ed.. 33:1216-1222
A CrZr-alloyed layer was prepared through a pre-zirconizing and subsequent chromizing treatment on a Ti6Al4V substrate. After the removal of the top Cr deposit and Ti4Cr layers, a (Cr,Zr)-Ti solid-solution layer was obtained. The microstructure, comp
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7f5df3b4a8ebed745c8090ae8c0db57e
https://doi.org/10.1007/s11595-018-1955-0
https://doi.org/10.1007/s11595-018-1955-0
Development of latent fingermarks by unbalanced magnetron sputtering deposited ultra-thin metal film
Publikováno v:
Vacuum. 194:110577
Thin metal films with thickness above 50 nm have been successful used for developing level 1 features of latent fingermarks. In order to easily show the level 2 and level 3 features of the fingermarks, thinner films are needed to be fabricated. Three
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6948110f5dc60d66bfd539a6210a8a42
https://doi.org/10.1016/j.vacuum.2021.110577
https://doi.org/10.1016/j.vacuum.2021.110577
Publikováno v:
Applied Surface Science. 543:148787
Dual-phase amorphous-nanocrystalline A l 0.74 M o 0.26 alloy film was fabricated by annealing-induced crystallization (AIC) in precursor of amorphous A l 0.74 M o 0.26 alloy film at 550 °C. The precipitated A l 3 M o nano-grains with average size of
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::bef48858683db55a21bfe2a42beddf8d
https://doi.org/10.1016/j.apsusc.2020.148787
https://doi.org/10.1016/j.apsusc.2020.148787
Publikováno v:
Materials Science and Engineering: A. 799:140146
Amorphous alloy films exhibit high strength but low ductility, which limits their structural performance applications. Herein, we synthesize dual-phase composite Al 0.74 Mo 0.26 alloy films via the introduction of nanocrystallites to amorphous matrix
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b6ca49ca2c73cb832f3468d3f1b1d719
https://doi.org/10.1016/j.msea.2020.140146
https://doi.org/10.1016/j.msea.2020.140146
Publikováno v:
Journal of Wuhan University of Technology-Mater. Sci. Ed.. 31:1109-1116
The effect of thermal shock, in an accelerated-corrosion environment spectrum, on the fatigue and corrosion behavior of 7B04-T6 aluminum alloy, was determined. The environment spectrum consists of two modules, namely: salt-spray corrosion and thermal
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9d1cf01b4627931a9a012fb2b2014bae
https://doi.org/10.1007/s11595-016-1498-1
https://doi.org/10.1007/s11595-016-1498-1