Zobrazeno 1 - 10
of 65
pro vyhledávání: '"Shouhong Tan"'
Publikováno v:
Applied Sciences, Vol 10, Iss 17, p 6090 (2020)
Polycrystalline diamond (PCD)-coated mechanical seal rings were prepared by hot filament chemical vapor deposition (HFCVD) on graphite-loaded silicon carbide (GSiC) substrates. From the initial deposition process, the diamond first nucleated and then
Externí odkaz:
https://doaj.org/article/010c5b00afca4b159786d2cc73ab9b09
Publikováno v:
Materials, Vol 13, Iss 16, p 3586 (2020)
Silicon carbide (SiC) ceramic is an ideal material for mechanical seal because of its super hardness, high strength, low friction coefficient, good thermal conductivity, and resistance to friction and wear. However, due to relatively high resistivity
Externí odkaz:
https://doaj.org/article/7d4c21bbd0a246298c789296a315fce4
Publikováno v:
Applied Sciences
Volume 10
Issue 17
Applied Sciences, Vol 10, Iss 6090, p 6090 (2020)
Volume 10
Issue 17
Applied Sciences, Vol 10, Iss 6090, p 6090 (2020)
Polycrystalline diamond (PCD)-coated mechanical seal rings were prepared by hot filament chemical vapor deposition (HFCVD) on graphite-loaded silicon carbide (GSiC) substrates. From the initial deposition process, the diamond first nucleated and then
Publikováno v:
Materials
Volume 13
Issue 16
Materials, Vol 13, Iss 3586, p 3586 (2020)
Volume 13
Issue 16
Materials, Vol 13, Iss 3586, p 3586 (2020)
Silicon carbide (SiC) ceramic is an ideal material for mechanical seal because of its super hardness, high strength, low friction coefficient, good thermal conductivity, and resistance to friction and wear. However, due to relatively high resistivity
Autor:
Xiumin Yao1 xmyao@mail.sic.ac.cn, Shouhong Tan1, Xiangyu Zhang1, Zhengren Huang1, Dongliang Jiang1
Publikováno v:
Journal of Materials Science. Jul2007, Vol. 42 Issue 13, p4960-4966. 7p. 2 Diagrams, 1 Chart, 7 Graphs.
Publikováno v:
Journal of Materials Science. Sep2005, Vol. 40 Issue 18, p4939-4942. 4p. 1 Color Photograph, 2 Black and White Photographs, 1 Chart, 2 Graphs.
Autor:
Shaoqun Jiang, Weihua Zhao, Zehua Wang, Yu Yi, Zehua Zhou, Shouhong Tan, Dongliang Jiang, Ying Ding
Publikováno v:
International Journal of Applied Ceramic Technology. 10:970-977
For developing excellent microwave attenuation materials in a wide band, two series of SiC-C (graphite) composites with different C additions were fabricated by pressureless sintering, using α-SiC and β-SiC green powder, respectively. β-SBC compos
Core–shell structure from the solution–reprecipitation process in hot-pressed AlN-doped SiC ceramics
Publikováno v:
Acta Materialia. 55:5666-5673
A core–shell structure was observed in a series of 6H–SiC ceramics doped with 5–15 mol.% of AlN and hot-pressed at 2050 °C. Analytical electron microscopy revealed not only a significant AlN solution in the shell areas but also a detectable am
Publikováno v:
Journal of Materials Science. 42:4960-4966
SiC reticulated porous ceramics (SiC RPCs) was fabricated with polymer replicas method by using MgO–Al2O3–SiO2 additives as sintering aids at 1,000∼1,450 °C. The MgO–Al2O3–SiO2 additives were from alumina, kaolin and Talc powders. By emplo
Publikováno v:
International Journal of Materials Research. 97:614-620
The microstructures of three hot-pressed SiC ceramic materials with 5vol.%, 10vol.%, and 15vol.% AlN were investigated by analytical electron microscopy, especially electron energy-loss spectroscopic mapping (EELS mapping). AlN additives dissolve int