Zobrazeno 1 - 10
of 24
pro vyhledávání: '"Shou-fan Rong"'
Publikováno v:
China Foundry, Vol 13, Iss 6, Pp 396-401 (2016)
A low carbon steel (LCS)/high chromium white cast iron (HCCI) bimetal wear plate about 20 mm in thickness was prepared by liquid-liquid bimetal composite casting technology to substitute for the welding wear plate. A clear and distinguishable composi
Externí odkaz:
https://doaj.org/article/4568f1a8d43f4ff9ae120f724ef42bec
Publikováno v:
China Foundry, Vol 13, Iss 6, Pp 396-401 (2016)
A low carbon steel (LCS)/high chromium white cast iron (HCCI) bimetal wear plate about 20 mm in thickness was prepared by liquid-liquid bimetal composite casting technology to substitute for the welding wear plate. A clear and distinguishable composi
Publikováno v:
China Foundry, Vol 13, Iss 3, Pp 151-158 (2016)
In this study, the influence of minor titanium (Ti) addition on the microstructure and tensile properties of Mg-8Sn-1Zn based alloys were investigated by means of optical microscopy, X-ray diffraction, scanning electron microscopy, energy dispersive
Publikováno v:
Applied Mechanics and Materials. :1160-1164
To solve the problems of installed trival, resource waste, hammerhead falling off and improve the poor abrasion resistance of hammer handle under the crusher hammers working condition, the new combined type crusher hammers were designed by connecting
Publikováno v:
Applied Mechanics and Materials. :268-271
According to the hammer crusher working condition, a kind of dual liquid bimetal composite casting hammer was developed. Its service life is three times than that of high manganese steel. It improves the wear resistance and increases production effic
Publikováno v:
Advanced Materials Research. :128-131
Material wear such as abrasiveness, cavitations erosion, and grinding balls with large diameter etc, exists during the usage of ball mill lining board. The effect of the chemical contents, composite casting process and heat treatment parameter on the
Publikováno v:
Advanced Materials Research. :2061-2064
With the self-designed system of welding thermal cycle test, low alloy steel of Cr-Mo series was welded through proper welding procedure according to the phenomenon of cold crack and local hardening in weld metal, and in-situ detection of thermal cyc
Publikováno v:
Advanced Materials Research. :34-37
The influences of Mn and heat-treatment technology on microstructure and mechanical properties of medium-carbon-low-alloy wear-resistant cast steel were investigated. The results show that the hardness first increases and then drops down with the inc
Publikováno v:
Advanced Materials Research. :158-161
The effect of chemical constitution, casting technique and heat treatment parameters on microstructure, properties and wearing resistance of the bimetal composite were primarily researched by SEM, EDAX, TEM etc.. The results showed that the higher im
Publikováno v:
Advanced Materials Research. :1825-1830
In the paper, we selected high manganese steel as the binder and titanium carbide as the hard phase, which could attain single austenite bonded titanium carbide after water toughening in order to combine excellent toughness of matrix with good wear r