Zobrazeno 1 - 10
of 88
pro vyhledávání: '"Shih-Hang Chang"'
Publikováno v:
Scientific Reports, Vol 13, Iss 1, Pp 1-12 (2023)
Abstract In this study, we analyze the influences of carbon nanotube (CNT) addition on the martensite transformation and internal friction of Cu–Al–Ni shape-memory alloys (SMAs). X-ray diffraction and differential scanning calorimetry results dem
Externí odkaz:
https://doaj.org/article/6c8dcaf1922d429cbbd4bfc6d3852df0
Autor:
Shih-Hang Chang, Zong-Yu Li
Publikováno v:
Scientific Reports, Vol 13, Iss 1, Pp 1-11 (2023)
Abstract This study examined the evolution of the microstructure, microhardness, corrosion resistance, and selective leaching properties of oxide films formed on the surface of a Ti–50Zr (%) alloy during heat treatment at 600 °C for various time i
Externí odkaz:
https://doaj.org/article/6eb6a97b592249598765eb08286c67e9
Publikováno v:
Medžiagotyra, Vol 27, Iss 3, Pp 361-366 (2021)
In this study, we investigate the effect of heat treatment on the surface properties of carbon cloth electrodes and on the power generation efficiencies of microbial fuel cells (MFCs) configured with the heat-treated carbon cloth electrodes. Water co
Externí odkaz:
https://doaj.org/article/d641e098cb0f47a4a18cd7682a10e5b7
Autor:
Jian-Zhang Chen, Shih-Hang Chang
Publikováno v:
Metals, Vol 10, Iss 3, p 349 (2020)
n/a
Externí odkaz:
https://doaj.org/article/e7a665c5ed6142e38be96e1bf8b0094d
Publikováno v:
Metals, Vol 7, Iss 10, p 397 (2017)
Damping properties of the inherent and intrinsic internal friction peaks (IFPT + IFI) of Cu-xZn-11Al (x = 7.0, 7.5, 8.0, 8.5, and 9.0 wt. %) shape memory alloys (SMAs) were investigated by using dynamic mechanical analysis. The Cu-7.5Zn-11Al, Cu-8.0Z
Externí odkaz:
https://doaj.org/article/b87e570a75cb480791e75a7bfa100d9f
Autor:
Shih-Hang Chang, 張士航
101
In this study, self-assembled monolayer (SAM) is applied into organic spin valves (OSVs) as a monolayer spacer to reduce the local contact geometry issue. Self-assembled monolayer is one kind of molecular materials would form spontaneously o
In this study, self-assembled monolayer (SAM) is applied into organic spin valves (OSVs) as a monolayer spacer to reduce the local contact geometry issue. Self-assembled monolayer is one kind of molecular materials would form spontaneously o
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/57429696252931779989
Autor:
Shih-Hang Chang, 張世航
97
Structured ASIC design methodology is invented to fill the gap between standard cell design and FPGA. Router for Structured ASIC designs with pre-defined routing fabric was not well investigated in the past. In this thesis, we proposed to dev
Structured ASIC design methodology is invented to fill the gap between standard cell design and FPGA. Router for Structured ASIC designs with pre-defined routing fabric was not well investigated in the past. In this thesis, we proposed to dev
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/25577724749737782292
Autor:
Shih-Hang Chang, 張世航
95
The inherent internal friction (IFPT+IFI) of cold-rolled and annealed Ti50Ni50 alloy is studied under isothermal conditions. The tan δ values of two-stage (IFPT+IFI)B2→R and (IFPT+IFI)R→B19’ are both proportional to and thus the dampin
The inherent internal friction (IFPT+IFI) of cold-rolled and annealed Ti50Ni50 alloy is studied under isothermal conditions. The tan δ values of two-stage (IFPT+IFI)B2→R and (IFPT+IFI)R→B19’ are both proportional to and thus the dampin
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/81122093757518234723
Publikováno v:
Medžiagotyra, Vol 27, Iss 3, Pp 361-366 (2021)
In this study, we investigate the effect of heat treatment on the surface properties of carbon cloth electrodes and on the power generation efficiencies of microbial fuel cells (MFCs) configured with the heat-treated carbon cloth electrodes. Water co
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::0712ee90bc75d4c0623b154880cd57cb
https://doi.org/10.5755/j02.ms.27630
https://doi.org/10.5755/j02.ms.27630
Publikováno v:
Journal of Materials Research. 36:1686-1694
Martensitic transformation and damping capacities of inherent and intrinsic internal frictions (IFPT + IFI) of Ni50Mn40-xSn10+x (x = 0–4 at.%) ferromagnetic shape memory alloys (FSMAs) are investigated. The (IFPT + IFI)L21→14M peak height of Ni50
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c889851c1fecbd5732976ad0e86e149f
https://doi.org/10.1557/s43578-021-00222-5
https://doi.org/10.1557/s43578-021-00222-5