Zobrazeno 1 - 10
of 36
pro vyhledávání: '"Shi Xi Ouyang"'
Publikováno v:
Solid State Ionics. 219:20-28
The Aurivillius-type Bi2VO5.5-δ series doped by magnetic cations may have a significant electronic contribution to their total conductivity and special magnetoelectric properties which extend potential applications to magnetoelectronic and spintroni
Autor:
Shi Xi Ouyang, Shi Chao Zhang, Guang Hai Wang, Hao Ran Sun, Wei Wu, Mao Qiang Li, Yu Feng Chen, Xing Shi
Publikováno v:
Key Engineering Materials. :319-322
Nano-porous SiO2 insulation material was made from foamed aqueous slurry of nano-silica powder by filter-pressing. The foamed aqueous slurry mainly consists of hydrophobic SiO2 nano-particles, xonotlite whiskers and glass fiber. The latter two will e
Publikováno v:
Key Engineering Materials. :828-831
Porous Si3N4/SiO2/BN composite ceramics with high strength and low dielectric constant were prepared by dry-pressing process and pressureless sintering at 1750°C for 1.5 h in flow nitrogen. The influences of BN content on microstructure, porosity, m
Publikováno v:
Advanced Materials Research. 177:66-69
The Bi2MnxV1-xO5.5- powders were synthesized by high temperature melting method. The effect of Mn dopant concentration on the crystal structure and chemical composition was studied. The crystal structure was determined by X-ray powder diffraction.
Publikováno v:
Key Engineering Materials. :689-692
Porous SiO2 insulation material was made by wet process. Fibrous xonotlite crystal and glass fiber were used as reinforced fibers, and graphite, zirconia and titania powders were added as infrared scattering materials into the porous SiO2 insulation
Publikováno v:
Key Engineering Materials. :331-334
BiFeO3-based single-phase multiferroics have been widely studied in both ceramics and films. However, the macroscopic magnetic properties of BiFeO3 ceramics were now most very weak. In this work, MnO2 and Co2O3 were used as B-site substitutes in BiFe
Publikováno v:
Key Engineering Materials. :984-987
Extrusion gelation freeform fabrication (EGFF) is a new solid freeform fabrication technique to fabricate ceramic parts. The study of ceramic suspensions rheological behavior is essential to a better understanding of parts fabrication through EGFF pr
Publikováno v:
Key Engineering Materials. :753-756
As a good binder for aqueous Al2O3 suspensions tape-casting process, a commercial styrene-acrylic latex binder had been investigated. This paper studied on the rheological behaviors of the suspensions and drying process of aqueous slurries with latex
Publikováno v:
Key Engineering Materials. 313:43-46
Piezoelectricity of composite was simulated by employing Dilute Model and Limit Unit method. The analogizing results recommend that the particle stackers influence the properties of piezo-composite. While fabricating piezo-composite, particles stack
Publikováno v:
Solid State Phenomena. 111:55-58
This paper focuses on the structural change and the thermochromism of the phase transition of the hybrid (C12H25NH3)2FeCl4. The temperature and the structures of the phase transition is investigated by a thermal gravimetry (TG) and differential scann