Zobrazeno 1 - 8
of 8
pro vyhledávání: '"Sheng Chuan Tang"'
Publikováno v:
International Journal of Civil Engineering. 17:921-933
Shear strength of a sandstone–mudstone particle mixture, filled along the bank of a large reservoir and subjected to wet–dry cycle induced by the rise–lower cycle of water level, may be affected by the wet–dry cycle. To investigate the effect
Publikováno v:
Journal of Geotechnical and Geoenvironmental Engineering. 139:1994-1997
This paper focuses on the effects of particle size distribution on shear strength of accumulation soil. A series of direct shear box tests and triaxial tests were performed to characterize the shear strength of the accumulation soil. Results from the
Publikováno v:
Advanced Materials Research. :1628-1634
As an important part of earthquake disaster relief, highway traffic system is the passage for rescue staffs, material transport and evacuation. Hence, people are concerned about destruction condition and safety of highways after earthquakes. However,
Publikováno v:
Environmental Earth Sciences. 75
The present study focuses on failure of a rock slope excavated in the autumn of 1997 and located in the repeated strata of sandstone and mudstone in Chongqing of China. The rock slope failed suddenly on April 28, 2014. The elapsed time from excavatio
Publikováno v:
Geotechnical and Geological Engineering. 27:315-323
The visualization of rock structure is a very useful and important technique in many aspects in geological and geotechnical engineering such as investigating and evaluating the stability of a high rock slope. The conventional method used to visualize
Publikováno v:
Journal of Geotechnical and Geoenvironmental Engineering. 141
Yang Xiao, S.M.ASCE; and Jun Liao Ph.D. Candidate, College of Civil and Transportation Engineering, Hohai Univ., Nanjing 210098, China. E-mail: hhuxyanson@163.com Senior Engineer, State Key Laboratory of Geohazard Prevention and Geoenvironment Protec
Autor:
Sheng-Chuan Tang, 湯盛全
92
The process capability indices(PCIs)are widely used to evaluate a manufacturer’s general process capability. PCIs are generally defined as the ratio of the allowable tolerance of a quality characteristic to the actual process performanc
The process capability indices(PCIs)are widely used to evaluate a manufacturer’s general process capability. PCIs are generally defined as the ratio of the allowable tolerance of a quality characteristic to the actual process performanc
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/02652996298328207388
Publikováno v:
Geotechnical & Geological Engineering; Jun2009, Vol. 27 Issue 3, p315-323, 9p