Zobrazeno 1 - 10
of 14
pro vyhledávání: '"Shantanu V. Madge"'
Autor:
Shantanu V. Madge
Publikováno v:
Metals, Vol 5, Iss 3, Pp 1279-1305 (2015)
Bulk metallic glasses (BMGs) have desirable properties like high strength and low modulus, but their toughness can show much variation, depending on the kind of test as well as alloy chemistry. This article reviews the type of toughness tests commonl
Externí odkaz:
https://doaj.org/article/408f4cecb18e4896a9d5c0452ada1cdd
Publikováno v:
Metals, Vol 3, Iss 1, Pp 41-48 (2012)
La55Al25Cu10Ni10 metallic glass has been reinforced with 325-mesh Ta particles to obtain ex situ glass-crystal composites. The composites show a high compressive plasticity (40%) with a minor reduction (~8%) in yield strength—a combination unpreced
Externí odkaz:
https://doaj.org/article/57d20ac7ecf94181b6f25f030a6d39d8
Autor:
Shantanu V Madge, A. Lindsay Greer
Publikováno v:
Oxford Open Materials Science. 1
Bulk metallic glasses (BMGs), on account of their attractive properties, have now begun to witness a few commercial applications, e.g. in coatings and micro-gears. Additive manufacturing (AM) or 3D printing, although established for crystalline alloy
Publikováno v:
Acta Materialia. 60:4800-4809
A range of bulk metallic glasses has been cast and their mode II fracture toughness has been estimated from the length scale of shear band vein patterns on fracture surfaces. As-cast rare-earth and Mg-based bulk metallic glasses invariably consist of
Autor:
Dmitri V. Louzguine-Luzgin, Shantanu V. Madge, Parmanand Sharma, A. Lindsay Greer, Akihisa Inoue
Publikováno v:
Intermetallics. 19:1474-1478
A range of phase-separating Zr-La-Cu-Ni-Al alloys has been cast. The Zr-based alloys show a dispersion of La-based, partially amorphous spheres in a Zr-based glassy matrix while the La-based alloys consist of Zr-based, crystalline spheres in a La-bas
Autor:
Akihisa Inoue, A. Lindsay Greer, Parmanand Sharma, Dmitri V. Louzguine-Luzgin, Shantanu V. Madge
Publikováno v:
Scripta Materialia. 62:210-213
Ex situ composites have been synthesized by reinforcing the brittle La55Al25Cu10Ni10 bulk metallic glass with varying volume fractions of spherical Ti particles. Ti is effective in significantly enhancing toughness, and optimum properties are obtaine
Autor:
Guoqiang Xie, Alain Lindsay Greer, Song Li, A.R. Yavari, Dmitri V. Louzguine-Luzgin, Shantanu V. Madge, Junji Saida, Akihisa Inoue
Publikováno v:
Philosophical Magazine Letters
Philosophical Magazine Letters, Taylor & Francis, 2010, 90 (2), pp.139-148
Philosophical Magazine Letters, Taylor & Francis, 2010, 90 (2), pp.139-148
This paper presents a study of the deformation behaviour of a glassy phase in two Zr-based alloys, Zr65Ni10Cu5Al7.5Pd12.5 and Zr65Al7.5Ni10Pd17.5, performed in situ in a transmission electron microscope. In contrast to the case of shear localisation
Publikováno v:
Scripta Materialia. 61:540-543
Compression testing shows that at low-oxygen levels (240 ppm) the Cu 49 Hf 42 Al 9 glass deforms predominantly by shear and is quite tough. Specimens with higher oxygen levels (1700 ppm) have oxygen-containing dendrites in an amorphous matrix and sho
Publikováno v:
Journal of Electronic Materials. 36:1615-1620
We report on the nature of the orientation of Ag3Sn and the Ag3Sn/Sn interface in Sn-3.5Ag solder. Orientation imaging microscopy (OIM) and transmission electron microscopy (TEM) were used to characterize the orientation and nature of the interface,
Autor:
Gerhard Wilde, Shantanu V. Madge
Publikováno v:
International Journal of Materials Research. 97:395-403
Several Pd-base alloys display a large tendency for glass formation that renders them especially suitable for investigations concerning (metastable) equilibrium properties of the deeply undercooled liquid including the glass transition, since the det