Zobrazeno 1 - 10
of 17
pro vyhledávání: '"Shang-yi Wu"'
Publikováno v:
Sensors, Vol 14, Iss 11, Pp 21549-21564 (2014)
The collision fault detection of a XXY stage is proposed for the first time in this paper. The stage characteristic signals are extracted and imported into the master and slave chaos error systems by signal filtering from the vibratory magnitude of t
Externí odkaz:
https://doaj.org/article/e10ff3332e6a4e80845493bd29bc27f2
Autor:
Shang-Yi Wu, 吳尚頤
104
Ball bearings will inevitably wear out with long use and require to be replaced. While the result of normal wear may simply be machining errors that may be corrected, an unexpected breakdown can cause delays in production and even damage oth
Ball bearings will inevitably wear out with long use and require to be replaced. While the result of normal wear may simply be machining errors that may be corrected, an unexpected breakdown can cause delays in production and even damage oth
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/d6kc7j
Autor:
Shang-yi Wu, 吳尚怡
98
This research is to constructing Taiwan hot spring hotel evaluation indexes to realize the fatal items of management quality. Finally, we make a conclusion for it by weight analysis as the suggestion for hot spring hotel operators. By second
This research is to constructing Taiwan hot spring hotel evaluation indexes to realize the fatal items of management quality. Finally, we make a conclusion for it by weight analysis as the suggestion for hot spring hotel operators. By second
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/34034829074148922651
Autor:
Shang-Yi Wu, 吳尚益
92
In this thesis, filament-wound carbon/carbon composites were made and studied in their damage behavior. The carbon/phenolic composites were first made, followed by the carbonization of the composites at 600℃. Densification of the materials
In this thesis, filament-wound carbon/carbon composites were made and studied in their damage behavior. The carbon/phenolic composites were first made, followed by the carbonization of the composites at 600℃. Densification of the materials
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/10077177558190749003
Autor:
Shang-Yi Wu, 吳上義
89
The BaxSr1-xTiO3 and Al-doped BST thin films were fabricated on Pt/TaN/SiO2/Si and Al2O3 substrates using sol-gel technique. The structure and thermal decomposition were investigated by means of thermogravimetric/differential thermal analysis
The BaxSr1-xTiO3 and Al-doped BST thin films were fabricated on Pt/TaN/SiO2/Si and Al2O3 substrates using sol-gel technique. The structure and thermal decomposition were investigated by means of thermogravimetric/differential thermal analysis
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/70593650752251125979
Autor:
Shang-Yi Wu, 吳尚怡
101
Erosion and landslides often occur in Taiwan during June-October typhoon season as a result of steep topography, young and weak geological formations as well as heavy rainfalls. In this case, hydroseeding is often utilized for vegetation rec
Erosion and landslides often occur in Taiwan during June-October typhoon season as a result of steep topography, young and weak geological formations as well as heavy rainfalls. In this case, hydroseeding is often utilized for vegetation rec
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/11682874998467884968
Publikováno v:
IEEE Transactions on Industrial Electronics. 63:3824-3833
This study proposes a detection method that incorporates the extension theory with fractional-order chaotic self-synchronization of dynamic errors in order to analyze ball bearing signals. A fractional-order Chen–Lee chaotic system (FOCLCS), which
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1203efeb7f5c207294d8a52dee6ea57c
https://doi.org/10.1109/tie.2016.2522941
https://doi.org/10.1109/tie.2016.2522941
Publikováno v:
IET Generation, Transmission & Distribution. 9:2775-2781
It is known that real-time power quality monitoring is usually rather difficult to achieve due to the requirement of expensive equipments and necessary of more signals to be captured. To solve this problem, this study combines fractional order Sprott
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5b6b9f84d64707c6e4b38b4f57e8e9d8
https://doi.org/10.1049/iet-gtd.2015.0500
https://doi.org/10.1049/iet-gtd.2015.0500
Publikováno v:
Polymer Composites. 30:1709-1715
The processing characteristics and the induced compressive damage in filament-wound carbon/carbon composites were examined. Tubular carbon/phenolic composites were made by the filament winding method. The inside diameter was 25.4 mm and the nominal t
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b0a4aee9f77ea072aacfe5416c071765
https://doi.org/10.1002/pc.20747
https://doi.org/10.1002/pc.20747
Publikováno v:
Materials Chemistry and Physics. 79:276-281
The characteristics of the Ba(Mg1/3Ta2/3)O3, BMT, powders prepared from chemical routes were compared with that of the BMT powders prepared from mixed-oxide routes. The formation of secondary phase, which usually occurs during the calcination of mixe
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d40acc2444759c749907cb69e182580a
https://doi.org/10.1016/s0254-0584(02)00276-6
https://doi.org/10.1016/s0254-0584(02)00276-6