Zobrazeno 1 - 10
of 16
pro vyhledávání: '"Shang-Wei Tsai"'
Autor:
Shang-wei Tsai, 蔡尚偉
103
Due to the growing problem of pollution, the concept of organic wastes disposal is no longer viable. Based on the concept of materials from nature and returning to nature, there should be effective recycling of the organic wastes to make fer
Due to the growing problem of pollution, the concept of organic wastes disposal is no longer viable. Based on the concept of materials from nature and returning to nature, there should be effective recycling of the organic wastes to make fer
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/51316091691973158778
Autor:
Shang-wei Tsai, 蔡尚瑋
92
To avoid warpage and have less driven voltage, two new types of electrostatic actuated micro-focusing mirror based on bulk micromachining and surface micromachining is designed in this thesis. One is circular clamped and the other is center-a
To avoid warpage and have less driven voltage, two new types of electrostatic actuated micro-focusing mirror based on bulk micromachining and surface micromachining is designed in this thesis. One is circular clamped and the other is center-a
Externí odkaz:
http://ndltd.ncl.edu.tw/handle/95389533080642054161
Publikováno v:
2017 IEEE Electrical Design of Advanced Packaging and Systems Symposium (EDAPS).
This paper proposes a novel method to clearly differentiate the distinct problems of temperature and IR drop inside a chip. This method involves the placement of two same ring-oscillator-based sensors in specific areas. Simulation results show that a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c8c6f1941891328d526389ccaa6dedf2
https://doi.org/10.1109/edaps.2017.8277024
https://doi.org/10.1109/edaps.2017.8277024
Publikováno v:
IEEE Sensors Journal. 13:2466-2473
A micromachined liquid-phase deposition (LPD)-based ${\rm SnO}_{2}$ gas sensor that is integrated with a tantalum nitride (TaN) microheater on micro-hotplate is designed and fabricated using microelectromechanical systems technology. TaN is available
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f2f7b7c96ad3fd2781990acb6ab28a25
https://doi.org/10.1109/jsen.2013.2256780
https://doi.org/10.1109/jsen.2013.2256780
Autor:
Jin-Chern Chiou, Shang Wei Tsai
Publikováno v:
Sensors and Actuators B: Chemical. 152:176-182
In situ SiO 2 -doped SnO 2 thin films were successfully prepared by liquid phase deposition. The influence of SiO 2 additive as an inhibitor on the surface morphology and the grain size for the thin film has been investigated. These results show that
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::61b7c87f89fd9a0236a700c32c8dd14e
https://doi.org/10.1016/j.snb.2010.12.004
https://doi.org/10.1016/j.snb.2010.12.004
Publikováno v:
2015 IEEE SENSORS.
This work presents a type of capacitive sensor for intraocular pressure (IOP) measurement on soft contact lens with Radio Frequency Identification (RFID) module. The flexible capacitive IOP sensor and Rx antenna was designed and fabricated using MEMS
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c80dd1024c0da7c07f7d21b3a5781070
https://doi.org/10.1109/icsens.2015.7370237
https://doi.org/10.1109/icsens.2015.7370237
Publikováno v:
IEEE SENSORS 2014 Proceedings.
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ad07070869acdd0057c31032e60c3d82
https://doi.org/10.1109/icsens.2014.6985140
https://doi.org/10.1109/icsens.2014.6985140
Publikováno v:
2013 IEEE SENSORS.
In this study, the MEMS-based SnO2 gas sensor with a TaN heater, MSGST, was designed and fabricated using micromachining technology. The heating performance of the TaN heater was measured using an IR thermometer. The response of the MSGST sensor to H
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5ff620f2761b6c55c622e2a09129f2d9
https://doi.org/10.1109/icsens.2013.6688151
https://doi.org/10.1109/icsens.2013.6688151
Publikováno v:
NEMS
Epilepsy suppression with cooling stimulation is the primary purpose for this study. In this dissertation, cooling stimulation was implemented and demonstrated on cerebral cortex of rats. Electrodes with needle structure was designed and fabricated b
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::1f607ec0f9515b58d0057682a05d6489
https://doi.org/10.1109/nems.2013.6559945
https://doi.org/10.1109/nems.2013.6559945
Design and fabrication of micromachined LPD-based SnO2 gas sensor integrated TaN with micro-hotplate
Publikováno v:
2012 IEEE Sensors.
In this study, the design and fabrication of a micromachined LPD-based SnO 2 gas sensor integrated with TaN micro-hotplate was carried out by utilizing MEMS technology. In the characteristics of the micro-heater, thermal response, thermal distributio
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::aa18e8a7f1c3eede5957d714cc783593
https://doi.org/10.1109/icsens.2012.6411275
https://doi.org/10.1109/icsens.2012.6411275