Zobrazeno 1 - 10
of 52
pro vyhledávání: '"Seyed Mohammad Safieddin Ardebili"'
Autor:
Masoud Rabeti, Omid Jahanian, Ali Akbar Ranjbar, Seyed Mohammad Safieddin Ardebili, Hamit Solmaz
Publikováno v:
Journal of Applied and Computational Mechanics, Vol 9, Iss 1, Pp 45-57 (2023)
In this paper, the influence of equivalence ratio on the low-temperature reaction heat release (LTR-HR) and high-temperature reaction heat release (HTR-HR) of homogeneous charge compression ignition engine has been experimentally and numerically exam
Externí odkaz:
https://doaj.org/article/04586b9b7c1b426885a238bc687f137f
Autor:
Masoud Rabeti, Ali Akbar Ranjbar, Omid Jahanian, Seyed Mohammad Safieddin Ardebili, Hamit Solmaz
Publikováno v:
Energy Reports, Vol 7, Iss , Pp 8652-8666 (2021)
Homogeneous charge compression ignition engine is a promising alternative to traditional internal combustion engines mainly due to its high thermal efficiency, low NOx, and soot emissions. Heat transfer from gases to the combustion chamber walls has
Externí odkaz:
https://doaj.org/article/898d3e13fabb44d7ac6899e462ddfac7
Publikováno v:
International Journal of Advanced Design and Manufacturing Technology, Vol 14, Iss 3, Pp 55-64 (2021)
In the present study, the hydraulic-thermal design and optimization of a gasketed-plate heat exchanger (GPHE) with an objective function of heat exchanger performance index (the amount of transferred heat exchange to pumping power ratio) is carried o
Externí odkaz:
https://doaj.org/article/f460362953c342259ccf3a4a6827bffe
Autor:
Juan Zapata-Mina, Seyed Mohammad Safieddin Ardebili, Alvaro Restrepo, Hamit Solmaz, Alper Calam, Özer Can
Publikováno v:
Case Studies in Thermal Engineering, Vol 32, Iss , Pp 101899- (2022)
Homogeneous Charge compression ignition (HCCI) combustion mode is a very interesting new combustion model with high efficiency, low nitrogen oxide (NOx), and soot emissions. In the present investigation, the performance of an HCCI engine operated wit
Externí odkaz:
https://doaj.org/article/66c550a2ac9c40728cbde7bf4b7e7fab
Multi-objective optimization of pyrolysis process of Prosopis farcta under non-isothermal conditions
Publikováno v:
Advances in Environmental Technology, Vol 6, Iss 4, Pp 223-234 (2020)
Biochar is a recalcitrant substance that is produced through the pyrolysis process. The location of this study was Ahvaz in the central part of Khuzestan Province, Iran. To produce biochar, the biomass of Prosopis farcta was pyrolyzed at a temperatur
Externí odkaz:
https://doaj.org/article/2719ed6140984b53b90a56ecbb33bbf0
Publikováno v:
Advances in Environmental Technology, Vol 6, Iss 3, Pp 149-159 (2020)
In this research work, the performance and the exhaust emissions of a CI engine operating on diesel-biodiesel-ethanol blended fuels were investigated. The main purpose of this study aimed to reduce the various emissions produced by the new blended fu
Externí odkaz:
https://doaj.org/article/f6bf2df8e6654367b9f9920e58070cdc
Autor:
Obed M. Ali, Rizalman Mamat, Gholamhassan Najafi, Talal Yusaf, Seyed Mohammad Safieddin Ardebili
Publikováno v:
Energies, Vol 8, Iss 12, Pp 14136-14150 (2015)
In this study, the fuel properties and engine performance of blended palm biodiesel-diesel using diethyl ether as additive have been investigated. The properties of B30 blended palm biodiesel-diesel fuel were measured and analyzed statistically with
Externí odkaz:
https://doaj.org/article/163b354bdbd44f919a9e3d35deada728
Autor:
Sunil Kumar Mahla, Seyed Mohammad Safieddin Ardebili, Masoud Rabeti, Geetesh Goga, Amit Dhir, Himanshu Sharma
Publikováno v:
Energy Sources, Part A: Recovery, Utilization, and Environmental Effects. 44:9395-9411
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8ce1a3de08adf7bf05f1d0d2f9d399e8
https://doi.org/10.1080/15567036.2022.2133194
https://doi.org/10.1080/15567036.2022.2133194
Publikováno v:
Thermal Science, Vol 26, Iss 1 Part B, Pp 693-703 (2022)
The present study modifies the structural design of a shell-and-tube heat exchanger by considering two key parameters such as the maximization of the overall heat transfer coefficient and minimization of the total pressure drop. Five geometric design
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::96359e70b71ea2b5dc74419f1fa3dbb6
https://doi.org/10.2298/tsci210225252b
https://doi.org/10.2298/tsci210225252b
Autor:
Hamit Solmaz, Alper Calam, Emre Yılmaz, Fatih Şahin, Seyed Mohammad Safieddin Ardebili, Fatih Aksoy
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e2a404456874ae24b446a5cfab48bfae
https://avesis.gazi.edu.tr/publication/details/d906a9de-799c-42b6-9e75-9aa8bb08d8ae/oai
https://avesis.gazi.edu.tr/publication/details/d906a9de-799c-42b6-9e75-9aa8bb08d8ae/oai
