Zobrazeno 1 - 9
of 9
pro vyhledávání: '"Seyed Elias Mousavi"'
Publikováno v:
Lubricants, Vol 11, Iss 9, p 392 (2023)
Precipitation strengthening of body-center cubic (A2) alloys via ordered B2 nanoprecipitates is expected to achieve a desirable combination of strength and ductility. In this work, the A2/B2 configuration is manipulated by adjusting Fe content in med
Externí odkaz:
https://doaj.org/article/0111d09bc3eb47c5ba12ab7c0f456ad1
Autor:
Ali Sonboli, Mohabbat Amirnejad, Hossein Shammakhi, Seyed Elias Mousavi, Nastaran Naghshehkesh
Publikováno v:
Transactions of Nonferrous Metals Society of China. 31:499-511
The effect of diamond-like carbon (DLC) coating (fabricated by cathodic arc deposition) on mechanical properties, tribological behavior and corrosion performance of the Ni−Al−bronze (NAB) alloy was investigated. Nano-hardness and pin-on-plate tes
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::91cb8e3dbf4deeca2c349ab393f9d07e
https://doi.org/10.1016/s1003-6326(21)65512-7
https://doi.org/10.1016/s1003-6326(21)65512-7
Autor:
Hossein Shammakhi, Ali Sonboli, Seyed Elias Mousavi, Mohabbat Amirnejad, Nastaran Naghshehkesh
Publikováno v:
Metals and Materials International. 27:3269-3281
Ni–Al bronze (NAB) was coated with Stellite-6 through gas-fueled high-velocity oxyfuel spraying. Scanning electron microscopy observations revealed the accumulation of Tungsten-rich particles at the substrate-coating interface. These areas played a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e4be65632cc728f73d6572e392fcd770
https://doi.org/10.1007/s12540-020-00697-7
https://doi.org/10.1007/s12540-020-00697-7
Publikováno v:
Materials Science and Engineering: A. 728:231-238
The effect of equal channel angular pressing on the microstructure and the mechanical properties of a 60–40 brass alloy and a brass alloy containing 2.5 wt% Lead was investigated. The process was carried out at 300 °C and 400 °C through the route
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::bd71f44e1a3fda0560f440393b46fcf8
https://doi.org/10.1016/j.msea.2018.05.032
https://doi.org/10.1016/j.msea.2018.05.032
Publikováno v:
Journal of Materials Science. 52:8041-8051
In this study, the effect of equal-channel angular pressing process on the mechanical properties of a dual-phase 60–40 brass alloy was investigated. The samples were processed up to six passes through the route C at 350 °C. Optical microscopy and
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ace22d51d503dd4ab415a78308e74370
https://doi.org/10.1007/s10853-017-1006-9
https://doi.org/10.1007/s10853-017-1006-9
Autor:
Seyed Hadi Mohamadi Azghandi, Mahmood Meratian, Mohabbat Amirnejad, Paul Munroe, Seyed Elias Mousavi, Ali Sonboli
Publikováno v:
Materials Science and Engineering: A. 802:140654
Low stacking fault energy alloys often exhibit low ductility. However, sometimes these alloys show unusual mechanical behavior following specific processing parameters. In this study, a low stacking fault energy α+β brass was processed by equal cha
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0f67490520706428886a18b432594467
https://doi.org/10.1016/j.msea.2020.140654
https://doi.org/10.1016/j.msea.2020.140654
Autor:
Nastaran Naghshehkesh, Seyed Elias Mousavi, Ali Salehi, Mahmood Meratian, Mohsen Sanayei, Ali Sonboli
Publikováno v:
Materials Science and Engineering: A. 788:139550
In this research, two phase brass alloy as one of the most important copper base alloys was processed by equal channel angular pressing as a severe plastic deformation process. The process was performed at 350 °C in route C up to 6 passes. Microstru
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a2bf8059e15d8a592b1cc2a6b044008f
https://doi.org/10.1016/j.msea.2020.139550
https://doi.org/10.1016/j.msea.2020.139550
Autor:
Ali Ashrafi, Fathallah Karimzadeh, Seyed Elias Mousavi, Nastaran Naghshehkesh, Veronika Trembošová, Behzad Sadeghi, Martin Nosko
Publikováno v:
Materials Research Express. 6:106566
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5e1d62eeae9451eb3a573e7aa7490de1
https://doi.org/10.1088/2053-1591/ab3a6f
https://doi.org/10.1088/2053-1591/ab3a6f
Autor:
Nastaran Naghshehkesh, Seyed Elias Mousavi, Fathallah Karimzadeh, Ali Ashrafi, Martin Nosko, Veronika Trembošová, Behzad Sadeghi
Publikováno v:
Materials Research Express; Oct2019, Vol. 6 Issue 10, p1-1, 1p