Zobrazeno 1 - 10
of 28
pro vyhledávání: '"Sasawat Mahabunphachai"'
Publikováno v:
Advances in Mechanical Engineering, Vol 12 (2020)
The paper investigated the effect of localized friction on sheet thinning under lubricated conditions in the deep-drawing process. The Finite Element Analysis (FEA) was used to evaluate the sheet thinning of the AISI 304 sheet under six segmented bla
Externí odkaz:
https://doaj.org/article/753bf2c232a94a8c95a8a30d65a3a256
Publikováno v:
Materials Testing. 62:769-774
This study proposes a method for integrating finite element analysis and response surface methodology to predict tearing locations in the deep drawing of a rectangular-shape AISI 304 cup. The finite element model was confirmed by a deep-drawing exper
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::51a466d07fb5382e1b5725bf5d5dd93d
https://doi.org/10.3139/120.111551
https://doi.org/10.3139/120.111551
Publikováno v:
Materials Today: Proceedings. 5:9543-9551
Distortion induced by welding process is one of the major problems found in shipbuilding industries. Significant loss in time and cost to correct and repair this welding defect occurs whenever the distortion value exceeds the shipbuilding standard li
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::7f39cfc0f51d2e93fca0f09eb248f429
https://doi.org/10.1016/j.matpr.2017.10.136
https://doi.org/10.1016/j.matpr.2017.10.136
Autor:
Norio Takatsuji, Sedthawatt Sucharitpwatskul, Tatsuya Funazuka, Sasawat Mahabunphachai, Kuniaki Dohda, Numpon Mahayotsanun
Publikováno v:
Key Engineering Materials. 739:135-142
Micro-extrusion process is one of the micro-forming technology for fabrication of micro-parts such as micro-gear shaft for microelectromechanical system (MEMS) and micro pins for electronic parts. This paper presents the friction models effects and g
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d64a79a79879f73dc3c08074d031616f
https://doi.org/10.4028/www.scientific.net/kem.739.135
https://doi.org/10.4028/www.scientific.net/kem.739.135
Publikováno v:
Transactions of the IMF. 94:199-203
This study has used a simple method to predict wear of die coatings used in the strip ironing of steel sheet based on Archard’s wear model by using finite element (FE) simulation. This method required the information regarding the quantity of worn
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::cc775ee389967316e8a4f8e12ace2a4b
https://doi.org/10.1080/00202967.2016.1180813
https://doi.org/10.1080/00202967.2016.1180813
Publikováno v:
Advances in Mechanical Engineering, Vol 12 (2020)
The paper investigated the effect of localized friction on sheet thinning under lubricated conditions in the deep-drawing process. The Finite Element Analysis (FEA) was used to evaluate the sheet thinning of the AISI 304 sheet under six segmented bla
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::448c6e0dabfbc84d7b9b3a4c0c65d003
https://doi.org/10.1177/1687814020953941
https://doi.org/10.1177/1687814020953941
Autor:
Numpon Mahayotsanun, Kuniaki Dohda, Sedthawatt Sucharitpwatskul, Sasawat Mahabunphachai, Pramote Koowattanasuchat
Publikováno v:
Coatings
Volume 10
Issue 6
Coatings, Vol 10, Iss 584, p 584 (2020)
Volume 10
Issue 6
Coatings, Vol 10, Iss 584, p 584 (2020)
In heat exchange applications, the heat transfer efficiency could be improved by surface modifications. Shot peening was one of the cost-effective methods to provide different surface roughness. The objectives of this study were (1) to investigate th
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::dde62501d542989d80c75b230abbae58
https://doi.org/10.3390/coatings10060584
https://doi.org/10.3390/coatings10060584
Autor:
Sasawat Mahabunphachai, Sukunthakan Ngernbamrung, Numpon Mahayotsanun, Kuniaki Dohda, Phanuwat Jewvattanarak
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. 230:974-982
This article investigated the tribological performance of the specially formulated chlorine-free lubricant in strip drawing of advanced high strength steel. Four different lubrication conditions (dry, chlorine-free lubricant, chlorine additive lubric
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b3e414f47311295d92b619a68a46cbde
https://doi.org/10.1177/1350650115622366
https://doi.org/10.1177/1350650115622366
Publikováno v:
Advances in Materials and Processing Technologies. 1:350-360
This article investigates the tribological effects of stainless steel strip drawing by considering the influences of contact pressure, sliding velocity, lubricant, bending angle and surface texture...
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c7b44076422863d35a958fad490bec61
https://doi.org/10.1080/2374068x.2015.1133744
https://doi.org/10.1080/2374068x.2015.1133744
Autor:
Vitoon Uthaisangsuk, Sasawat Mahabunphachai, S. Chutima, A. Pattarangkun, Purit Thanakijkasem
Publikováno v:
International Journal of Automotive Technology. 16:611-617
This research conducts a comparative study of finite element analysis (FEA) in tube hydroforming (THF). The investigated tube is stainless steel grade 304 (SS304) of as received and after annealing (AN). Three different finite element modeling techni
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::72027346c46db001e434b5320b3306c8
https://doi.org/10.1007/s12239-015-0062-x
https://doi.org/10.1007/s12239-015-0062-x