Zobrazeno 1 - 10
of 79
pro vyhledávání: '"Sapieta Milan"'
Publikováno v:
MATEC Web of Conferences, Vol 357, p 03001 (2022)
The aim of this paper is to present a method of computer formulation and solution of equations of kinematics of spatial mechanical systems. The method of the vector closed loop is generally known way how to built the constraint equations. This method
Externí odkaz:
https://doaj.org/article/aa59a7b819884f36a32f00a7b34289a6
Publikováno v:
MATEC Web of Conferences, Vol 357, p 05001 (2022)
The subject of investigation is a set of four artificial heart valves made of electrically conductive material, namely the alloy Ti-6Al-4V. Notches of defined geometry with gradually increasing depth were formed on these BSCC (Bjork-Shiley Convexo-Co
Externí odkaz:
https://doaj.org/article/0307a0b5338149fab978fb29945c997a
Publikováno v:
MATEC Web of Conferences, Vol 254, p 02011 (2019)
T-joints are often used in large-scale welded constructions. The use of a laser beam for welding allows to create joints using various techniques. Used welding method affects the shape and size of heat affected zone, deformation of welded elements an
Externí odkaz:
https://doaj.org/article/2c918c956f134c4b9613bf99c37177e1
Publikováno v:
MATEC Web of Conferences, Vol 254, p 02022 (2019)
In this paper, an effort has been put to analyze the rolling ball bearing using finite element analysis the contact pressure level, stress or displacement behavior of rolling ball bearing. The obtained results were then compared with the analytical r
Externí odkaz:
https://doaj.org/article/c893b51339c84cc8b450ecf885621f0d
Autor:
Sapieta Milan, Sulka Peter
Publikováno v:
MATEC Web of Conferences, Vol 254, p 02004 (2019)
The paper deals with the fatigue damage calculation of 2 types of computation model of bolted joints. The study is performed via a numerical analysis with support of finite element method (FEM) software ANSYS. One model was created with a thread on t
Externí odkaz:
https://doaj.org/article/5a3c8e4d4bd84ddda979ec5ac070a027
Publikováno v:
MATEC Web of Conferences, Vol 157, p 04004 (2018)
The article deals with improving the quality of the cut flat glass. The aim of the study was to determine mechanism of origin temporary and permanent stress in the glass. This affects the quality of the cut flat glass. Of the commonly measured proces
Externí odkaz:
https://doaj.org/article/bf1c9002542c444b8b64858c4482f222
Publikováno v:
MATEC Web of Conferences, Vol 244, p 01023 (2018)
In this paper, an effort has been put to analyze the rolling ball bearing using finite element analysis the contact pressure level, stress or displacement behavior of rolling ball bearing. The obtained results were then compared with the analytical r
Externí odkaz:
https://doaj.org/article/df76cb12d6aa4b1ebff4f916ce3405e1
Publikováno v:
MATEC Web of Conferences, Vol 157, p 03018 (2018)
In the solutions will be presented to the interaction of two bodies loaded with impact effects in the environment of software MSC. ADAMS. By performing a sensitivity analysis of the parameters influencing to the effects of impact and function paramet
Externí odkaz:
https://doaj.org/article/19d240adcc5c423ba3bee50ee272e7a3
Publikováno v:
MATEC Web of Conferences, Vol 157, p 01016 (2018)
The main purpose of this paper is monitoring propagation of plastic area of fatigue crack. There were made notch on specimens and they were cyclically loaded with three-point bending. The record was evaluated after a certain number of loading cycles.
Externí odkaz:
https://doaj.org/article/de7b71834a2747ce873d4e3ba7454da9
Publikováno v:
MATEC Web of Conferences, Vol 157, p 03016 (2018)
The paper presents an analysis of impact force on stopper screw in axial piston hydraulic motor. The solution contains probabilistic description of input variables. If the output parameters of probabilistic solution are compared with arbitrary values
Externí odkaz:
https://doaj.org/article/52469c0a350f4a6989f26b46be080975