Zobrazeno 1 - 10
of 46
pro vyhledávání: '"Sanja ŠOLIĆ"'
Publikováno v:
Journal of Materials Research and Technology, Vol 29, Iss , Pp 1253-1261 (2024)
Due to its high thermal expansion coefficient and high thermal conductivity, welding of copper and copper alloys is considered difficult and demanding. Activated TIG welding (A-TIG) welding has been widely researched as a welding method for obtaining
Externí odkaz:
https://doaj.org/article/b6071353653240a0911f885e35f5fce6
Publikováno v:
Tehnički Glasnik, Vol 18, Iss 1, Pp 87-91 (2024)
Laser powder bed fusion (LPBF) process has a great ability to produce complex AlSi10Mg 3D components with uncommon degrees of freedom for broad span of applications in different industries. Presence of the microstructural imperfections such as porosi
Externí odkaz:
https://doaj.org/article/958fce95b1f847ca84d0582b2508cc79
Publikováno v:
Metals, Vol 14, Iss 4, p 435 (2024)
This paper investigates the casting defects of a stainless steel pump impeller manufactured through the sand casting process. The material characterization of austenitic steel AISI 316L was initially carried out, which examined the chemical compositi
Externí odkaz:
https://doaj.org/article/245e2c8408fa414485b4bb473883c5fe
Autor:
Dalibor VIDERŠČAK, Zdravko SCHAUPERL, Krunoslav ORMUŽ, Sanja ŠOLIĆ, Mladen NIKŠIĆ, Diana MILČIĆ, Pavao ORMUŽ
Publikováno v:
Promet (Zagreb), Vol 34, Iss 1, Pp 91-102 (2022)
In this research, field and laboratory testing of three commercially available brake pads with the lowest, mid-dle, and highest price were performed. Complex field testing, where brake pads were tested in real extreme conditions on a loaded van vehic
Externí odkaz:
https://doaj.org/article/f108ff311de145eab5110837aaf11672
Publikováno v:
Tehnički Glasnik, Vol 13, Iss 3, Pp 213-217 (2019)
High speed steel (HSS) is a very important industrial tool material and has been constantly improved for different wear resistance applications and cutting tools, i.e. drills, milling cutters, hobs and for the cutting tools in which the economical cu
Externí odkaz:
https://doaj.org/article/a1edbe9c82ce418b9af0b5721d988915
Publikováno v:
Tehnički Glasnik, Vol 11, Iss 4, Pp 166-170 (2017)
Properly performed heat treatment can significantly affect final properties of high-speed steels, so the heat treatment parameters are chosen depending on the specific properties of the particular tool. Deep cryogenic treatment is carried out at a te
Externí odkaz:
https://doaj.org/article/9c8eb632d11549589c0f616898c8a447
Publikováno v:
International Journal of Molecular Sciences; Volume 24; Issue 2; Pages: 909
Silanized glass fibers are popular reinforcements of acrylic denture base materials. To increase the number of surface hydroxyl groups and to improve interfacial adhesion between the matrix and reinforcements, acid or base treatments of glass fibers
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::29e3e508745f0a2c2deb75811f366f8b
https://www.bib.irb.hr/1241839
https://www.bib.irb.hr/1241839
Publikováno v:
Metallic Materials. 57:429-434
In this paper the influence of deep cryogenic treatment of high-speed steel substrate on the hardness, friction coefficient and wear rate in the dry sliding conditions of the TiAlN coating was investigated. The obtained results show that the substrat
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::f93d393fb17db8614a4becd60158edd5
https://doi.org/10.4149/km_2019_6_429
https://doi.org/10.4149/km_2019_6_429
Autor:
Črtomir Donik, Irena Paulin, Aleksandra Kocijan, Matjaž Godec, Sanja Šolić, Amir Ćatić, Dalibor Viderščak, Zdravko Schauperl
Publikováno v:
Materials
Materials, Vol 14, Iss 7350, p 7350 (2021)
Volume 14
Issue 23
Materials; Volume 14; Issue 23; Pages: 7350
Materials, Vol 14, Iss 7350, p 7350 (2021)
Volume 14
Issue 23
Materials; Volume 14; Issue 23; Pages: 7350
Laser-powder bed fusion (LPBF) is one of the preferred techniques for producing Co-Cr metal structures for dental prosthodontic appliances. However, there is generally insufficient information about material properties related to the production proce
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::e6d5794d873bdd6c311a83edcf682dbd
http://europepmc.org/articles/PMC8658371
http://europepmc.org/articles/PMC8658371
Publikováno v:
Engineering Failure Analysis. 92:140-148
Heat treatment has the greatest impact on the microstructure and properties, as well as the residual stresses and dimensional control of steel. Most of the problems that occur in heat-treated parts are attributed to improper heat-treatment practices,
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::38122c2137c82a66c9242f32665d63d7
https://doi.org/10.1016/j.engfailanal.2018.05.008
https://doi.org/10.1016/j.engfailanal.2018.05.008