Zobrazeno 1 - 10
of 71
pro vyhledávání: '"Salman Nourouzi"'
Self-Cleaning Properties of TiN/CrN Nanoscale Multi-layer Deposited on Surgical 420C Stainless Steel
Publikováno v:
Journal of Nanostructures, Vol 9, Iss 4, Pp 702-711 (2019)
The present paper focuses on the investigation of self-cleaning properties based on studding of water repellency and blood repellency for TiN- and CrN single-layer and TiN/CrN nanoscale multi-layer coatings deposited via Cathodic Arc Evaporation (CAE
Externí odkaz:
https://doaj.org/article/84728e1ffc414126bcd9414ce2cc29fc
Publikováno v:
Journal of Applied and Computational Mechanics, Vol 5, Iss 2, Pp 249-257 (2019)
The creation of modified layer on metal surfaces using new methods is one of the procedures in surface engineering which can improve the surface mechanical properties. The electrical discharge process is a new method that can form a modified layer on
Externí odkaz:
https://doaj.org/article/a885958fee1b4284a0c7fd296e3f01c7
Publikováno v:
Hydrogen, Fuel Cell & Energy Storage, Vol 4, Iss 2, Pp 125-138 (2017)
Distribution of contact pressure between the bipolar plate and gas diffusion layer considerably affect the performance of proton exchange membrane fuel cell. In this regard, an adaptive neuro-fuzzy inference system (ANFIS) is developed to predict the
Externí odkaz:
https://doaj.org/article/0d3ddc94918644e9b005f73710c0b650
Publikováno v:
Hydrogen, Fuel Cell & Energy Storage, Vol 3, Iss 1, Pp 1-10 (2016)
Effect of clamping pressure on electrical resistance between Gas diffusion layer (GDL) and bipolar plate is a very important parameter in Proton exchange membrane (PEM) fuel cells. For investigation of this matter some researches have been done in th
Externí odkaz:
https://doaj.org/article/393825da622f481fb819bd6ba1bb2eab
Publikováno v:
International Journal of Advanced Design and Manufacturing Technology, Vol 6, Iss 1 (2013)
There are many parameters that affect the sheet hydroforming process such as fluid pressure, material properties, interfacial friction between blank and tool surfaces, etc. In this paper, a FEM-based Taguchi method is used to determine the effects of
Externí odkaz:
https://doaj.org/article/4336168f4bd84c5f8c3c3ff229645d3f
Publikováno v:
CIRP Journal of Manufacturing Science and Technology. 39:276-293
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9d9d3b69a6e72eb55e48ff78707eb472
https://doi.org/10.1016/j.cirpj.2022.08.008
https://doi.org/10.1016/j.cirpj.2022.08.008
Publikováno v:
CIRP Journal of Manufacturing Science and Technology. 35:41-52
This study has investigated the tensile deformation and fracture behavior of friction stir processed hypereutectic Al-Si-Cu alloy at ambient and high temperatures. The high-temperature tensile tests were performed at 300 °C, 400 °C, and 500 °C and
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::6f2f71bee5de4ef7324545522f71209b
https://doi.org/10.1016/j.cirpj.2021.04.008
https://doi.org/10.1016/j.cirpj.2021.04.008
Publikováno v:
CIRP Journal of Manufacturing Science and Technology. 35:735-743
In the current research, the friction stir back extrusion (FSBE) process as a novel method was used to fabricate the gradient AA6063/SiC composite wires. The scanning electron microscopy equipped with EDS analysis was utilized. To investigate mechani
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5b09125687dd2ee3ef9dceb2eceac89e
https://doi.org/10.1016/j.cirpj.2021.09.004
https://doi.org/10.1016/j.cirpj.2021.09.004
Publikováno v:
International Journal of Metalcasting. 16:1397-1414
The purpose of this study was to determine the effect of titanium reinforcement on the microstructure and mechanical properties of an Al-Zn-Mg-Cu alloy matrix composite. The composite was formed using the compocasting method in a semisolid–liquid s
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b3537093218d770a1d9b2560a9ca67bd
https://doi.org/10.1007/s40962-021-00698-1
https://doi.org/10.1007/s40962-021-00698-1
Publikováno v:
Metals and Materials International. 28:1508-1516
Aluminum alloys are used in numerous industrial fields due to low weight and high strength to weight ratio. Among different forming processes, semi-solid casting is one of the most attractive methods for obtaining improved structures as well as minim
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::4a7aa69b426ec0cfcf9db0af46ed2bb8
https://doi.org/10.1007/s12540-021-01056-w
https://doi.org/10.1007/s12540-021-01056-w