Zobrazeno 1 - 9
of 9
pro vyhledávání: '"Saleh Ahmed Aldahash"'
Autor:
Osama Abdelaal, Saleh Ahmed Aldahash
Publikováno v:
Applied Sciences, Vol 14, Iss 13, p 5444 (2024)
Significant advances in reverse engineering and additive manufacturing have the potential to provide a faster, accurate, and cost-effective process chain for preserving, analyzing, and presenting forensic impression evidence in both 3D digital and ph
Externí odkaz:
https://doaj.org/article/008ddfdfcfad41e6b11a28764996de49
Publikováno v:
Journal of Natural Fibers, Vol 20, Iss 2 (2023)
In this study, copper nanoparticles were synthesized from Trapa natans L. shells and loaded within polyamide-12 for use as an adsorbent. The synthesized nanocomposite was used for the first time to remove toxic methyl orange and brilliant green dye m
Externí odkaz:
https://doaj.org/article/eabd68f884fe4cd581eff8a7e9d066ba
Publikováno v:
Scientific Reports, Vol 12, Iss 1, Pp 1-19 (2022)
Abstract Polyamide-12/Portland cement nanocomposite was prepared by using the exfoliated adsorption method. The fabricated nanocomposite was applied first time to remove Congo red (CR), brilliant green (BG), methylene blue (MB), and methyl red (MR) f
Externí odkaz:
https://doaj.org/article/087a47365f694519bc9670f94fa5e9ce
Publikováno v:
Journal of Mechanical Science and Technology. 34:5075-5084
Recently, the adaptive network-based fuzzy inference system (ANFIS) has been used extensively in modeling of manufacturing processes to save both optimization time and manufacturing costs. ANFIS is a powerful iterative tool for optimizing non-linear
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0e295da1db8fb5731c5216b9f4a2a945
https://doi.org/10.1007/s12206-020-1111-6
https://doi.org/10.1007/s12206-020-1111-6
Publikováno v:
Rapid Prototyping Journal. 26:1103-1112
Purpose The cement-filled PA12 manufactured by selective laser sintering (SLS) offers desirable mechanical properties; however, these properties are dependent on several fabrication parameters. As a result, SLS prototypes may exhibit orthotropic mech
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9c99ecc11f9a6f6446e1c1d12329e918
https://doi.org/10.1108/rpj-07-2019-0191
https://doi.org/10.1108/rpj-07-2019-0191
Publikováno v:
The International Journal of Artificial Organs. 42:645-657
The production of customized prostheses for the foot and ankle still relies on slow and laborious steps of the traditional plaster molding fabrication techniques. Additive manufacturing techniques where three-dimensional objects can be constructed di
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::d8b61fdac6a0768b98a0c8dc0c60255f
https://doi.org/10.1177/0391398819847682
https://doi.org/10.1177/0391398819847682
Publikováno v:
Advances in Materials Science and Engineering, Vol 2019 (2019)
Selective laser sintering (SLS) becomes a promising technology for manufacturing complicated objects with small to moderate numbers from a wide range of polymeric and metallic powders. However, the fabrication parameters in the SLS process need to be
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::9cd50c966ecccb30462d6af2f8ff22d9
https://doi.org/10.1155/2019/8404857
https://doi.org/10.1155/2019/8404857
Publikováno v:
Materials, Vol 13, Iss 3967, p 3967 (2020)
Materials
Volume 13
Issue 18
Materials
Volume 13
Issue 18
Erosion and erosion&ndash
corrosion tests of as-built Ti-6Al-4V manufactured by Selective Laser Melting were investigated using slurries composed of SiO2 sand particles and either tap water (pure water) or 3.5% NaCl solution (artificial seawater
corrosion tests of as-built Ti-6Al-4V manufactured by Selective Laser Melting were investigated using slurries composed of SiO2 sand particles and either tap water (pure water) or 3.5% NaCl solution (artificial seawater
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::55bdb8ebaa2f1786d748573643b388fe
https://www.mdpi.com/1996-1944/13/18/3967
https://www.mdpi.com/1996-1944/13/18/3967
Autor:
Saleh Ahmed Aldahash
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 96:257-270
Selective laser sintering (SLS) is a modern rapid prototyping method with which 3D objects with complex geometries can be manufactured precisely through the sintering of powders’ thin layers using the laser power. The effective manufacturing parame
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::b58052b645542eda360e7400aee0f91d
https://doi.org/10.1007/s00170-018-1584-y
https://doi.org/10.1007/s00170-018-1584-y