Deep learning approach towards accurate state of charge estimation for lithium-ion batteries using self-supervised transformer model.

Autor: Hannan MA; Department of Electrical Power Engineering, COE, Universiti Tenaga Nasional, 43000, Kajang, Malaysia. hannan@uniten.edu.my., How DNT; Department of Electrical Power Engineering, COE, Universiti Tenaga Nasional, 43000, Kajang, Malaysia. dickson@uniten.edu.my., Lipu MSH; Department of Electrical, Electronic and Systems Engineering, Universiti Kebangsaan Malaysia, 43600, Bangi, Malaysia., Mansor M; Department of Electrical Power Engineering, COE, Universiti Tenaga Nasional, 43000, Kajang, Malaysia., Ker PJ; Institute of Sustainable Energy, Universiti Tenaga Nasional, 43000, Kajang, Malaysia., Dong ZY; School of Electrical Engineering and Telecommunications, UNSW, Kensington, NSW, 2033, Australia., Sahari KSM; Department of Mechanical Engineering, COE, Universiti Tenaga Nasional, 43000, Kajang, Malaysia., Tiong SK; Institute of Sustainable Energy, Universiti Tenaga Nasional, 43000, Kajang, Malaysia., Muttaqi KM; School of Electrical, Computer and Telecommunications Engineering, University of Wollongong, Wollongong, NSW, 2522, Australia., Mahlia TMI; Institute of Sustainable Energy, Universiti Tenaga Nasional, 43000, Kajang, Malaysia.; Centre of Green Technology, Faculty of Engineering and Information Technology, University of Technology Sydney, Ultimo, NSW, 2007, Australia., Blaabjerg F; Department of Energy Technology, Aalborg University, 9220, Aalborg, Denmark.

Publikováno v: Scientific reports [Sci Rep] 2021 Oct 01; Vol. 11 (1), pp. 19541. Date of Electronic Publication: 2021 Oct 01.

Design of a multi-diameter in-line cleaning and fault detection pipe pigging device.

Autor: Alnaimi, Firas B Ismail, Mazraeh, Ali Ahmadian, Sahari, KSM, Weria, K, Moslem, Y

Publikováno v: 2015 IEEE International Symposium on Robotics & Intelligent Sensors (IRIS); 2015, p258-265, 8p

Free convection heat transfer and buoyancy-assisted flow over a heated plate inserted horizontally in a vertical channel with time-varying conditions.

Autor: Saraç, Betül¹ (AUTHOR) bsarac@ktu.edu.tr, Aksu, Erhan¹ (AUTHOR), Demirtaş, Cevdet² (AUTHOR), Ayhan, Teoman³ (AUTHOR)

Publikováno v: Journal of Thermal Analysis & Calorimetry. Mar2024, Vol. 149 Issue 5, p2255-2271. 17p.

Unveiling the Microstructural Segregation and Micro-hardness Behaviour in Ti-6Al-4 V Alloy Prepared through Copper Mould Casting.

Autor: Verma, Juhi Rani, Prabhu, Yogesh, Jain, Abhilasha, Bhatt, Jatin

Publikováno v: Transactions of the Indian Institute of Metals; Nov2024, Vol. 77 Issue 11, p3245-3253, 9p

Influence of spindle speeds on the formability, microstructure, mechanical properties and fracture behaviour of Ti-6Al-4V alloy foils during single point micro incremental forming (SPMIF) process.

Autor: G., Yoganjaneyulu, S., Vigneshwaran, S., Sivasankaran, Alhomidan, Abdullah A.

Publikováno v: International Journal of Material Forming; Sep2024, Vol. 17 Issue 5, p1-14, 14p