Zobrazeno 1 - 10
of 51
pro vyhledávání: '"Saden H Zahiri"'
Autor:
Mohammed Abdul Khalik, Saden H. Zahiri, Syed H. Masood, Stefan Gulizia, M. Faizan-Ur-Rab, Suresh Palanisamy
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 126:4297-4316
Abstract Large-scale industrial application of additively manufactured (AM) components in general, and specifically cold sprayed additive manufactured (CSAM), is limited due to the nature of this technology and the resulting product’s porosity and
Autor:
Mohammed Abdul Khalik, Saden H Zahiri, Syed H Masood, Stefan Gulizia, Muhammad Faizan-Ur-Rab, Suresh Palanisamy
Large-scale industrial application of additively manufactured (AM) components in general, and specifically cold sprayed additive manufactured (CSAM), is limited due to the nature of this technology and the resulting product’s porosity and embrittle
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::944eb7a0f663e84a740e1e01e4192f03
https://doi.org/10.21203/rs.3.rs-2583631/v1
https://doi.org/10.21203/rs.3.rs-2583631/v1
Autor:
Magdi F Morks, Saden H Zahiri, Xiao-Bo Chen, Stefan Gulizia, Alejandro Vargas-Uscategui, Ivan S Cole
Publikováno v:
Journal of Materials Engineering and Performance. 31:5549-5558
Diffusion of oxygen and nitrogen in the cold sprayed commercially pure Ti (CS CP Ti) deposits profoundly impacts their mechanical properties. One plausible approach to additively manufacture a malleable (wrought) and high-density Ti is optimizing CS
Autor:
Stefan Gulizia, Saden H. Zahiri, Syed H. Masood, Muhammad Faizan-Ur-Rab, Suresh Palanisamy, Mohammed Abdul Khalik
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 119:773-788
In this study, an in situ electro-plastic treatment (ISEPT) process was used to simultaneously eliminate porosity and brittleness in cold spray (CS) additive manufacturing (AM) of a grade 2 commercial purity titanium (CP Ti). The CS deposition condit
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 118:3869-3881
This article reports the impacts of the powders morphologies and post-processing heat treatment on microstructure and mechanical properties of cold-sprayed commercial pure (CP) Ti deposits. The results show that cold-sprayed CP Ti deposited from sphe
Publikováno v:
The International Journal of Advanced Manufacturing Technology. 115:2639-2657
Titanium and its alloys have been used in a broad range of products such as biomedical implants due to their high specific strength, corrosion resistance, and biocompatibility. Improvement in microstructure and mechanical properties of commercially p
Publikováno v:
Journal of Materials Research. 36:3679-3690
Rapid advances in 3D hybrid additive manufacturing have provided opportunities to the use of Ta as a highly effective biomaterial. In this study, we used electron beam melting (EBM) process to fabricate Ti–6Al–4V 3D structures (EBM-Ti64) and then
Publikováno v:
Journal of Thermal Spray Technology. 29:1498-1507
Cold spray has been developed recently to be used as an additive manufacturing technology in order to fabricate bulk components. Residual stresses are known to build up in coatings made by cold spray; therefore, cold spray additive manufacturing (CSA
Autor:
Guang Zeng, Xiaobo Chen, Saden H. Zahiri, Stefan Gulizia, Yaping Chen, Chenglong Xu, Qiushi Deng, Qing Cao, Ivan Cole
Publikováno v:
SSRN Electronic Journal.
Autor:
Guang Zeng, Qiushi Deng, Stefan Gulizia, Saden H. Zahiri, Yaping Chen, Chenglong Xu, Qing Cao, Xiao-Bo Chen, Ivan Cole
Publikováno v:
Smart Materials in Manufacturing. 1:100007