Zobrazeno 1 - 10
of 21
pro vyhledávání: '"Sadegh Pour-Ali"'
Publikováno v:
Journal of Materials Research and Technology, Vol 30, Iss , Pp 2051-2063 (2024)
The corrosion behavior and chloride threshold concentration of AISI 316L stainless steel reinforcement bar (rebar), subjected to high-energy shot peening (HESPed), are compared with its solution-annealed (SAed) counterpart in simulated concrete pore
Externí odkaz:
https://doaj.org/article/2446e8a228614d6d863912f90f39d914
Publikováno v:
Corrosion.
High energy shot peening (HESP) as a common near-surface severe plastic deformation (NS-SPD) was employed to create a severely deformed surface with ultrafine grains and dense crystallographic defects (e.g., grain boundaries, dislocations, and twins)
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f86f8ff282a4a33d891793d387e24352
https://doi.org/10.5006/4141
https://doi.org/10.5006/4141
Publikováno v:
Journal of Failure Analysis and Prevention. 21:1154-1163
This study investigates the premature failure of an axial flow valve used in a gas flow control station. After the first reports of these valves' malfunction exposed to severe gas/solid flow, they were disassembled. It was found that their common iss
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::9043e2333250b93bca8150c185bbde6b
https://doi.org/10.1007/s11668-021-01190-y
https://doi.org/10.1007/s11668-021-01190-y
Publikováno v:
Corrosion Science. 212:110935
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c7ded1d49eba90955c9994f286501dfb
https://doi.org/10.1016/j.corsci.2022.110935
https://doi.org/10.1016/j.corsci.2022.110935
Autor:
Nhat Truong Nguyen, Sannakaisa Virtanen, Ali Davoodi, Afshin Nazarnejatizadeh, Abolfazl Babakhani, Seyedsina Hejazi, Ali-Reza Kiani-Rashid, Sadegh Pour-Ali, Hashem Teimourinejad
Publikováno v:
International Journal of Materials Research. 110:570-576
Solution annealing followed by quenching in carbon nanotubes (QCNT) nanofluid treatment was applied to generate very high interstitial carbon content,≈0.30 wt.%, in an austenitic stainless steel (ASS). The high interstitial carbon content leads to
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::0e112a4ff718f404e70b4c3de9481c85
https://doi.org/10.3139/146.111773
https://doi.org/10.3139/146.111773
Autor:
Abolfazl Babakhani, Sannakaisa Virtanen, Mohsen Norouzi, Sadegh Pour-Ali, Ali-Reza Kiani-Rashid
Publikováno v:
Corrosion Science. 147:231-245
Oxidation behaviour of surface nanocrystallized 321 austenitic stainless steel (SN–321ASS) and its conventional polycrystalline counterpart (CP–321ASS) in O2 + 10% H2O at 1000 °C was comparatively investigated. Uniform dense distribution of high
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5c7c94234b77e3ae8fb40678cbed51ae
https://doi.org/10.1016/j.corsci.2018.11.024
https://doi.org/10.1016/j.corsci.2018.11.024
Autor:
Sadegh Pour-Ali, Seyedsina Hejazi
Publikováno v:
Journal of Molecular Liquids. 354:118886
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::84626abe1335dcd6561ca05a870d8469
https://doi.org/10.1016/j.molliq.2022.118886
https://doi.org/10.1016/j.molliq.2022.118886
Publikováno v:
International Journal of Materials Research. 109:451-459
In this study, AISI 321 austenitic stainless steel samples were surface treated using severe shot peening (SSP) with 1 000 % and 1 300 % coverages. Microstructural features including the grain size, phase transformation, and formation of sub-surface
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::8cf9d7e838828aac952a860a78087f2a
https://doi.org/10.3139/146.111622
https://doi.org/10.3139/146.111622
Publikováno v:
Ceramics International. 44:8297-8305
To control the degradation of magnesium alloys and improve the mechanical performance of common hydroxyapatite (HAp) coatings, a HAp coating containing multi-walled carbon nanotubes (MWCNT) was applied on AZ31 magnesium alloy using plasma spray techn
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::dbc5435f396de002877f1964b369a81c
https://doi.org/10.1016/j.ceramint.2018.02.015
https://doi.org/10.1016/j.ceramint.2018.02.015