Zobrazeno 1 - 10
of 13
pro vyhledávání: '"Sabrina Mohd Shapee"'
Autor:
Sabrina Mohd Shapee, Rosidah Alias, Zulkifli Ambak, Muhammad Redzuan Saad, Ibrahim Azmi, Mohd Zulfadli Mohamed Yusoff
Publikováno v:
Materials Science Forum. :2378-2381
Screen printing is the most common method of transferring silver thick film paste to a low temperature co-fired ceramic tape. Silver paste with varying rheology will have a varying print quality. The effect of silver paste rheology on the microstruct
Autor:
Mohd Zulfadli Mohamed Yusoff, Rosidah Alias, Ibrahim Azmi, Muhammad Redzuan Saad, Zulkifli Ambak, Sabrina Mohd Shapee
Publikováno v:
Materials Science Forum. :2394-2397
This paper reports observations of defects in laminated eight layers of a glass-ceramic composite system fabricated by a standard low temperature co-fired ceramic (LTCC) technology. The layers were laminated at 3000 psi and 70 °C for 10 minutes and
Autor:
Zulfadli Mohamed Yusoff, Muhammad Redzuan Saad, Sabrina Mohd Shapee, Zulkifli Ambak, Ibrahim Azmi, Rosidah Alias
Publikováno v:
Key Engineering Materials. :485-489
Effect of screen printing parameter such as squeegee speed was studied in this paper for the surface roughness of gold paste on the Ferro A6M LTCC tape. Roughness measurement was evaluated by 3D profilometer of the Ferro A6M LTCC tape co-fired with A
Autor:
Che Seman Mahmood, Megat Harun Al Rashid Megat Ahmad, Sabrina Mohd Shapee, Rosidah Alias, Muhammad Redzuan Saad, Zulkifli Ambak, Zulfadli Mohamed Yusoff, Ibrahim Azmi
Publikováno v:
Key Engineering Materials. :285-288
An Al2O3-SiO2-PbO-MgO laminated tape system was prepared to investigate the dependence of some physical properties on various sintering temperatures, 840 °C, 880 °C, 920 °C and 960 °C. The results show that the effect of the increasing sintering
Autor:
Che Seman Mahmood, Mohamed Razman Yahya, Sabrina Mohd Shapee, Abd. Fatah Awang Mat, Azmi Ibrahim, Rosidah Alias, Abdul Aziz Mohamed, Megat Harun Al Rashid Megat Ahmad
Publikováno v:
Materials Letters. 62:2339-2342
Nanostructured α-alumina powder was synthesized by precipitation and calcination of Al 13 -clusters that were formed by the hydrolysis of Al 3+ ions with hydroxide. The Al 13 -clusters were precipitated with oxalic acid by two-stage and one-stage pr
Autor:
Sabrina Mohd Shapee, Rosidah Alias
Publikováno v:
Rheology
Low Temperature Co-fired Ceramic (LTCC) technology has attracted much attention for high frequency applications due to the advantages in preparing 3D circuits within a ceramic block that enables burying of passive elements; resistor, inductor and cap
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::23ec59c05a707c2d95096c0bd85fb8e9
https://doi.org/10.5772/35004
https://doi.org/10.5772/35004
Autor:
Mohd Zulfadli Mohamed Yusoff, Rosidah Alias, Sabrina Mohd Shapee, M.R Saad, H.A Ishak, Zulkifli Ambak, A. Ibrahim
Publikováno v:
2010 IEEE Student Conference on Research and Development (SCOReD).
A novel broadband design of a coplanar waveguide (CPW) fed T-shape slot antenna is proposed and experimentally studied. The antenna impedance and bandwidth are studied as function of substrate dielectric constant and shrinkage factor. The obtained re
Autor:
Rosidah Alias, Sabrina Mohd Shapee, Azmi Ibrahim, Megat Harun Al Rashid Megat Ahmad, Zulkifli Ambak, Muhammad Redzuan Saad, Che Seman Mahmood, Mohd Zulfadli Mohamed Yusoff, Ashaari Yusoff
Publikováno v:
2010 12th Electronics Packaging Technology Conference.
The study on Low temperature co-fired ceramic (LTCC) has been widely investigated due to its potential as an advanced approach for packaging of electronics devices. This paper evaluates and discusses about the firing temperatures effect on the densif
Autor:
Muhammad Redzuan Saad, Azmi Ibrahim, Mohammed Yusof, Rosidah Alias, Mohammed Razman Yahya, Zulkifli Ambak, Mohd Zulfadli, Sabrina Mohd Shapee
Publikováno v:
2010 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE).
The paper presents the design of Interdigital Band Pass Filter (IBPF) for WLAN applications at center frequency 2.45GHz. It was designed using a 3D EM simulation tool and fabricated on substrate Ferro A6S by using in-house process of Low Temperature
Autor:
Azmi Ibrahim, Muhammad Redzuan Saad, M.R. Yahya, Mohd Zulfadli Mohamed Yusoff, Rosidah Alias, Zulkifli Ambak, Sabrina Mohd Shapee, Abd. Fatah Awang Mat
Publikováno v:
2008 International Conference on Electronic Design.
A top-down detail design of a 5 GHz micro strip coupled line band pass filter in LTCC is presented in this paper. LTCC, which stands for low temperature co-fired ceramic is especially used for wireless and high-frequency applications. Now, the import