Zobrazeno 1 - 8
of 8
pro vyhledávání: '"Sabah Kh. Hussein"'
Publikováno v:
مجلة النهرين للعلوم الهندسية, Vol 11, Iss 3, Pp 450-458 (2008)
The application of a pack cementation of Y-doped chromium and silicon coatings on low alloy steel type-T22 yields a significant improvement in the oxidation resistance. Steel-T22 was coated with Ydopedchromizing-siliconizing. Diffusion coating was
Externí odkaz:
https://doaj.org/article/87be493484c94c6aa6d6c6b5051fe538
Publikováno v:
Journal of Engineering and Sustainable Development, Vol 11, Iss 1 (2007)
A polyester and composite polyester thin plate have been tested under a certain constant distributed load (q=8N/mm2) so as to give a linear behavior over the plane of area at constant temperature (T=15ºC). The plate has been tested for thickness val
Externí odkaz:
https://doaj.org/article/3745e17bebc74220a4e4e68fcfd4a26b
Publikováno v:
Metallography, Microstructure, and Analysis. 10:321-333
The mechanical properties and microstructures of dissimilar arc stud weldments of AISI 316L/AISI 1020 and AISI 304/AISI 1020 were investigated. Welding currents of 400, 600 and 800A and welding times of 0.2, 0.25, 0.3, 0.35, 0.4 and 0.45 second were
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::ab4393838afc46d76a98f6a8bde027e2
https://doi.org/10.1007/s13632-021-00744-8
https://doi.org/10.1007/s13632-021-00744-8
Publikováno v:
IOP Conference Series: Materials Science and Engineering. 1094:012054
Friction stir spot welding (FSSW) was conducted to weld a sheet of an aluminum alloy (AA5754-H114) to a commercial sheet of pure copper (Cu) having (2 mm) thickness. It was performed at various tool rotating speeds (800, 1000, and 1250 rpm), times of
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::de38e01a1c62b4138e61533305425b61
https://doi.org/10.1088/1757-899x/1094/1/012054
https://doi.org/10.1088/1757-899x/1094/1/012054
Publikováno v:
IOP Conference Series: Materials Science and Engineering. 881:012059
Dissimilar aluminum alloys of AA5086-H32 with AA6061-T6 were welded by friction stir welding method using three different values of linear and rotating speed; V = 50, 75 and 90 mm/min., N = 680, 920 and 1500RPM. Tensile test was used to determine the
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::95706ef9477e35ea37a8252ae276b3d0
https://doi.org/10.1088/1757-899x/881/1/012059
https://doi.org/10.1088/1757-899x/881/1/012059
Publikováno v:
IOP Conference Series: Materials Science and Engineering. 745:012059
Similar aluminum alloys (AA5086-H32 with AA5086-H32) were welded by friction stir welding (FSW) using three different values of linear speeds; namely 50, 75 and 90 mm/min.and different and rotating speed namely 680, 920 and 1500 rpm. Tensile test was
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::71effddf35b3660da676b2c47e6aff8e
https://doi.org/10.1088/1757-899x/745/1/012059
https://doi.org/10.1088/1757-899x/745/1/012059
Publikováno v:
IOP Conference Series: Materials Science and Engineering. 518:032022
Brazing processes were carried out using a Ancorbraze 72 and BAg8 fillers alloy, and furnace with Argon gas, characterization of the final joint is supported with optical microscopy, SEM, EDS and Hardness tests. This research is focused on the two st
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::576a5a0ad5767ca0c9d1c0441930580d
https://doi.org/10.1088/1757-899x/518/3/032022
https://doi.org/10.1088/1757-899x/518/3/032022
Publikováno v:
IOP Conference Series: Materials Science & Engineering; Jun2019, Vol. 518 Issue 3, p1-1, 1p