Výsledky vyhledávání

Akademický článek

The Analysis of Force Parameters in Drawing Process of High Carbon Steel Wires in Conventional and Hydrodynamic Dies

Autor: Suliga M.

Publikováno v: Archives of Metallurgy and Materials, Vol 62, Iss 4, Pp 2231-2236 (2017)

The paper analyzes force parameters in the process of multistage drawing of steel wires in conventional and hydrodynamic dies. The drawing process of the wire rod with a diameter of 5.5 mm for wires with a diameter of 1.70 mm was performed in 12 draf

Externí odkaz: https://doaj.org/article/c1a944f59a224fdeaf3bcfc00481fb30

Zobrazit plný text záznamu

Akademický článek

The Influence of the Angle of the Working Part of the Die on the High Speed Drawing Process of Low Carbon Steel Wires

Autor: Suliga M., Wartacz R., Michalczyk J.

Publikováno v: Archives of Metallurgy and Materials, Vol 62, Iss 2, Pp 483-487 (2017)

The paper contains the theoretical and experimental analysis of the impact of the drawing angle on the drawing process and the properties of low carbon steel wires. A multi-stage drawing wire rod with a diameter of 5.5 mm on a wire with a diameter of

Externí odkaz: https://doaj.org/article/fbac723cb75a4b41b5e123af0bbeb4bd

Zobrazit plný text záznamu

Akademický článek

Tento výsledek nelze pro nepřihlášené uživatele zobrazit.
K zobrazení výsledku je třeba se přihlásit.

Akademický článek

Estimation of the Level of Residual Stress in Wires with a Magnetic Method

Autor: Suliga M., Borowik L., Chwastek K.

Publikováno v: Archives of Metallurgy and Materials, Vol 60, Iss 1, Pp 409-413 (2015)

Residual stress present in wires after drawing process affects their magnetic properties. The paper presents a concept to estimate the level of residual stress on the basis of measurements of hysteresis loops. In order to describe the effect qualitat

Externí odkaz: https://doaj.org/article/8be0552d25894d549dc17315949a6216

Zobrazit plný text záznamu

Akademický článek

The Analysis of the High Speed Wire Drawing Process of High Carbon Steel Wires Under Hydrodynamic Lubrication Conditions

Autor: Suliga M.

Publikováno v: Archives of Metallurgy and Materials, Vol 60, Iss 1, Pp 403-408 (2015)

In this work the analysis of the wire drawing process in hydrodynamic dies has been done. The drawing process of φ5.5 mm wire rod to the final wire of φ1.7 mm was conducted in 12 passes, in drawing speed range of 5-25 m/s. For final wires of φ1.7

Externí odkaz: https://doaj.org/article/7acccfee5c4e47e4ba08af6f509365fe

Zobrazit plný text záznamu

Akademický článek

The Analysis of the Mechanical Properties of High Carbon Steel Wires after Multipass High Speed Drawning Process in Conventional and Hydrodynamic Dies

Autor: Suliga M.

Publikováno v: Archives of Metallurgy and Materials, Vol 59, Iss 2, Pp 681-685 (2014)

W pracy określono wpływ dużej prędkości ciągnienia na warunki smarowania i własności mechaniczne drutów ze stali wysokowęglowej ciągnionych w ciągadłach konwencjonalnych i hydrodynamicznych. Proces ciągnienia drutów o średnicy 5,5 mm

Externí odkaz: https://doaj.org/article/37798e1b5e04491b8b6ed825f04d59f1

Zobrazit plný text záznamu