Zobrazeno 1 - 10
of 89
pro vyhledávání: '"S.M. Byon"'
An approximate model to predict the surface profile of material sections in a 3-roll rolling process
Publikováno v:
Journal of Mechanical Science and Technology. 31:3489-3497
This paper proposes an approximate model to predict the spread and surface profile of cross sections of material in a Kocks mill that a string of mills driven by three-roll is lined-up in tandem. The spread at the exit of roll gap is expressed as a f
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::34d282887d5283c881eb623695e834e5
https://doi.org/10.1007/s12206-017-0638-7
https://doi.org/10.1007/s12206-017-0638-7
Publikováno v:
Transactions of Nonferrous Metals Society of China. 23:742-748
A flow stress equation was proposed to compute the roll force in the finishing stands of an actual rod mill where the strain rate and the temperature of the material range from 100 to 400 s −1 and from 900 to 1050 °C, respectively. The underlying
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::3a0a49b27b83749c2f8762979c1007d1
https://doi.org/10.1016/s1003-6326(13)62524-8
https://doi.org/10.1016/s1003-6326(13)62524-8
Publikováno v:
Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture. 225:2302-2308
We investigate front end bending (FEB) behaviours of material that usually occur during flat rolling using the shape factor, defined as the ratio of the mean contact length to the mean thickness of a material for a given roll-bite profile (that is, a
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a5ef437eebad27bd9c38b85e361e7d20
https://doi.org/10.1177/0954405411399513
https://doi.org/10.1177/0954405411399513
Publikováno v:
Transactions of Materials Processing. 20:284-290
The front end bending(FEB) behavior of material that usually occurs in plate rolling is investigated. In this paper, a rollbite profile map approach that systematically predicts the FEB slope is presented. It is based on the concurrent use of shape f
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c90dcfd82c9886bec516b420dfd7a3c1
https://doi.org/10.5228/kstp.2011.20.4.284
https://doi.org/10.5228/kstp.2011.20.4.284
Publikováno v:
Transactions of Nonferrous Metals Society of China. 21:s104-s110
A pilot wire drawing machine as well as wire end-pointing roller was developed. Using these machines, a wire drawing test for four different coating materials and two different lubricants was performed as the reduction ratio increased from 10% to 30%
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::c3016fdb25f8e21e5c20c00e3386a86d
https://doi.org/10.1016/s1003-6326(11)61071-6
https://doi.org/10.1016/s1003-6326(11)61071-6
Publikováno v:
Journal of Mechanical Science and Technology. 23:3374-3384
Steady-state rigid-plastic finite element analysis coupled with strain gradient plasticity theory has been performed to examine the size effect of material on its plastic deformation behavior and find an optimal semi-cone angle of die which minimizes
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::5129b91c7e9b341a736acee5ee24d944
https://doi.org/10.1007/s12206-009-0926-y
https://doi.org/10.1007/s12206-009-0926-y
Publikováno v:
Journal of Materials Processing Technology. 209:4465-4470
We machined work roll with groove worn down as well as groove with no wear. We then performed a pilot hot rod rolling test at temperature of 1000 °C using plain carbon steel (0.1% C) as the roll gap decreases from reference roll gap (6.5 mm) to 3.5
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e8b0e87d5ee1f0de4b6880ac1ec4797a
https://doi.org/10.1016/j.jmatprotec.2008.10.045
https://doi.org/10.1016/j.jmatprotec.2008.10.045
Publikováno v:
International Journal of Modern Physics B. 22:5400-5405
We present a full constitutive relation of silicon steel which can describe the anisotropy effect as well. Using a pilot rolling machine, initial silicon strip with thickness of 2.5mm is rolled into sheet with several thicknesses as reduction ratio i
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_dedup___::3f4b2c1b5e9edc2024fd58239ffe9446
https://doi.org/10.1142/s0217979208050565
https://doi.org/10.1142/s0217979208050565
Publikováno v:
Transactions of Materials Processing. 17:420-428
The effect of loading path changes on the strain and mechanical properties of a commercial pure aluminum was studied using flat rolling and groove rolling. Material during flat rolling undergoes a continuous monotonic compressive loading, while one d
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::62d4c2aaa1747baff0883824146fe937
https://doi.org/10.5228/kspp.2008.17.6.420
https://doi.org/10.5228/kspp.2008.17.6.420
Publikováno v:
Journal of Materials Processing Technology. 205:70-80
Since the surface defect frequently encountered in the hot bar rolling of steel can easily lead to a fatal manufacturing defect during the secondary cold forging process of bar stocks, it is necessary to minimize such a defect on the surface of hot r
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::a3dc3d2ae10e4a3abdff9defce19503a
https://doi.org/10.1016/j.jmatprotec.2007.11.099
https://doi.org/10.1016/j.jmatprotec.2007.11.099