Zobrazeno 1 - 10
of 483
pro vyhledávání: '"S.M. Bruemmer"'
Publikováno v:
Journal of Nuclear Materials. 321:192-209
The influence of oversized solute additions on the radiation-induced microstructure, radiation-induced segregation (RIS) at grain boundaries and post-irradiation intergranular stress corrosion cracking (IGSCC) behavior of model, high-purity 316 stain
Publikováno v:
Journal of Nuclear Materials. 317:13-31
Six austenitic stainless steel heats (three heats each of 304SS and 316SS) neutron-irradiated at 275 °C from 0.6 to 13.3 dpa have been carefully characterized by TEM and their hardness measured as a function of dose. The characterization revealed th
Autor:
P.L Andreson, Jian Gan, S.M. Bruemmer, A Jensson, Todd R. Allen, Gary S. Was, Edward A. Kenik, A.D Edwards, P.M Scott, J. T. Busby
Publikováno v:
Journal of Nuclear Materials. 300:198-216
This paper presents the results of the irradiation, characterization and irradiation assisted stress corrosion cracking (IASCC) behavior of proton- and neutron-irradiated samples of 304SS and 316SS from the same heats. The objective of the study was
Autor:
S.M. Bruemmer, V.Y. Gertsman
Publikováno v:
Acta Materialia. 49:1589-1598
Samples of austenitic stainless alloys were examined by means of scanning and transmission electron microscopy. Misorientations were measured by electron backscattered diffraction. Grain boundary distributions were analyzed with special emphasis on t
Publikováno v:
Materials Science Forum. :93-98
Tensile specimens of an Al-4Mg-0.3Sc alloy in the peak-aged (8 hours at 553 K) and the over-aged (96 hours at 623 K) conditions, cold-rolled to a 70% reduction, exhibited dynamic continuous recrystallization during superplastic testing at 733 K and a
Publikováno v:
Acta Materialia. 47:4125-4129
Rapid quenching of Al-Mg alloys during superplastic deformation has revealed the presence of nano-scale cavities along many grain boundaries. They were observed only under deformation conditions where grain boundary sliding was the dominant mechanism
Autor:
S.M. Bruemmer
Publikováno v:
Materials Science Forum. :75-82
Environmental degradation of metallic alloys is shown to depend on its local microstructure and microchemistry in many instances. Equilibrium and non-equilibrium processes can produce significant changes to the grain boundary composition and promote
Autor:
E.P. Simonen, S.M. Bruemmer
Publikováno v:
Materials Science Forum. :755-758
Radiation-induced segregation (RIS) to grain boundaries in Fe-Ni-Cr-Si stainless alloys has been measured as a function of irradiation temperature and dose. Heavy-ion irradiation was used to produce damage levels from 1 to 20 displacements per atom (
Publikováno v:
Materials Science and Engineering: A. 238:101-107
Recrystallization and grain growth studies of Al-Mg-X (where X is Mn, Zr or Sc) alloys have been carried out using a combination of optical and transmission electron microscopy of interrupted heating tests, changes in hardness, and in-situ observatio
Publikováno v:
Materials Science and Engineering: A. 232:23-30
The dissociation of extrinsic grain boundary dislocations (EGBDs) in Al, Al-Mg and Al-Mg-Sn alloys was studied at various temperatures. While EGBDs were commonly observed in low- and high-angle boundaries in the alloy materials deformed to small stra