Zobrazeno 1 - 10
of 79
pro vyhledávání: '"S.D. Peck"'
Autor:
S.D. Peck, J.C. Zeigler
Publikováno v:
IEEE Transactions on Appiled Superconductivity. 9:177-180
The economics of microSMES for a potential customer are adversely affected by the costs associated with cooling both the magnet cryostat and the power electronics in the system. One way to reduce these loads, and hence the cost, is to operate the mag
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::e63c57f9de2a6fd68993ea5979f36615
https://doi.org/10.1109/77.783265
https://doi.org/10.1109/77.783265
Autor:
J.C. Zeigler, S.D. Peck
Publikováno v:
IEEE Transactions on Magnetics. 30:1639-1644
The design for the 20 MW-hr SMES-ETM for the Bechtel concept calls for two splices per turn of conductor, and over 100 turns. The design value of resistance for the splices is on the order of 10/sup -11/ ohms (0.4) W/splice at 200 kA), which is an or
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::feef7e889ea3fe766ce5bcd71391559f
https://doi.org/10.1109/20.305573
https://doi.org/10.1109/20.305573
Autor:
S.D. Peck
Publikováno v:
IEEE Transactions on Magnetics. 30:2249-2252
An analysis of a scheme to induce transverse flow in the annulus between the beam tube and coils of an SSC dipole magnet is presented. Transverse, or cross flow, cooling is used to limit the temperature rise from heat sources in the beam tube. These
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::97f2e1a605057758e40ad572c360deae
https://doi.org/10.1109/20.305722
https://doi.org/10.1109/20.305722
Publikováno v:
IEEE Transactions on Appiled Superconductivity. 4:199-204
This paper describes the tests conducted to characterize the performance of the 200 kA conductor used in the Bechtel Team's SMES (superconducting magnetic energy storage) design. The CICC-type conductor was tested at operating temperature (1.8 K) and
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::abb574b3e2407661eca955ca1d51ea54
https://doi.org/10.1109/77.334959
https://doi.org/10.1109/77.334959
Publikováno v:
IEEE Transactions on Applied Superconductivity. 3:332-337
The authors discuss the engineering considerations driving the selection of a conductor concept for large-scale SMES (superconducting magnetic energy storage). There are five areas that require special attention: current diffusion effects, stability
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::49f18aa41ce216efd4e17f8a21d01857
https://doi.org/10.1109/77.233475
https://doi.org/10.1109/77.233475
Autor:
S.D. Peck, D.J. Kinzie
Publikováno v:
IEEE Transactions on Applied Superconductivity. 3:650-653
Analytic modeling tools have been developed to predict the quench behavior of the Superconducting Super Collider (SSC) dipole coils for a wide range of quench protection heater designs and configurations. Computer modeling tools have been developed t
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f5e27836b3ec260ecadac4083186b96f
https://doi.org/10.1109/77.233790
https://doi.org/10.1109/77.233790
Publikováno v:
IEEE Transactions on Magnetics. 27:2012-2015
Methods and devices for measuring the prototype Superconducting Super Collider (SSC) dipole magnetic field angle with respect to a vertical reference are discussed. An internal research and development project was conducted to develop a low-cost devi
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::d1a4a2cdc029739f0201e72d1e1aa54b
https://doi.org/10.1109/20.133601
https://doi.org/10.1109/20.133601
Publikováno v:
IEEE Transactions on Magnetics. 27:2395-2398
The test facility and the procedures used to characterize two full-scale copper-stabilized cable-in-conduit superconductors are described. The critical current at 1.8 K was 280 kA at a total field of 5.8 T, 260 kA at 6.4 T, and 215 kA at 7.4 T. The s
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::946699e81dcd655189c27c6a48ab1436
https://doi.org/10.1109/20.133701
https://doi.org/10.1109/20.133701
Autor:
S.D. Peck, P.H. Michels
Publikováno v:
IEEE Transactions on Magnetics. 27:1724-1727
The critical current and stability margin of a 200-kA, copper-stabilized, cable-in-conduit conductor cooled with helium-II have been measured. The test specimen was 3 m long, inserted in a uniform background dipole field of up to 5 T with an effectiv
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::f29c00cef068ad6fb8b2bf480bbd1923
https://doi.org/10.1109/20.133523
https://doi.org/10.1109/20.133523
Publikováno v:
IEEE Transactions on Magnetics. 27:2151-2153
A discussion is presented of the considerations and the lessons learned in designing inductive heaters for stability testing of a 200-kA conductor for superconducting magnetic energy storage (SMES). Two separate tests were run using different inducti
Externí odkaz:
https://explore.openaire.eu/search/publication?articleId=doi_________::20e3200ba0310e32d5b7cd10847ce718
https://doi.org/10.1109/20.133638
https://doi.org/10.1109/20.133638